scispace - formally typeset
Search or ask a question
Author

David R. Smith

Bio: David R. Smith is an academic researcher from Duke University. The author has contributed to research in topics: Metamaterial & Antenna (radio). The author has an hindex of 110, co-authored 881 publications receiving 91683 citations. Previous affiliations of David R. Smith include Brunel University London & Princeton University.


Papers
More filters
Proceedings ArticleDOI
TL;DR: In this paper, an alternative for millimeter-wave based on metamaterial resonators was presented, which produces strong phase modulation from a small tuning range, such as liquid crystal cells.
Abstract: Many phase spatial modulators exist at optical frequencies such as liquid crystal cells. We present an alternative for millimeter-waves based on metamaterial resonators that produces strong phase modulation from a small tuning range.
Journal ArticleDOI
TL;DR: In this article, a solution for polarisation-resolved bistatic frequency-modulated continuous-wave (FMCW) SAR with independently moving platforms is derived and demonstrated through simulation.
Abstract: Synthetic aperture radar (SAR) imaging with an independently moving transmitter and receiver introduces motion artefacts difficult to compensate for, especially between satellites in separate orbits that rendezvous over a target. A solution for polarisation-resolved bistatic frequency-modulated continuous-wave (FMCW) SAR with independently moving platforms is derived and demonstrated through simulation. This solution accounts for the polarisation of the source, susceptibility tensor of the target, and the velocity and acceleration of the transmitter and receiver. The accuracy of the solution is demonstrated by reconstructing simulated point ground targets with a pair of X-band SAR satellites of realistic parameters.
Proceedings ArticleDOI
TL;DR: In this article, the authors present a concept for an active surface actuator based on a form-closed eccentric cam (kinematically, the Scotch Yoke mechanism), which is limited in stroke but offers potential advantages in terms of manufacture, compactness, measurement, and survival loading.
Abstract: As radio telescopes have reached larger diameters and higher frequencies, it is typically not possible to meet their surface accuracy specifications using passive homology-based designs. The most common solution to this problem in the current generation of large, high-frequency radio telescopes is to employ a system of linear actuators to correct the surface shape of the primary reflector. The exact specifications of active surface actuators vary with the telescope. However, they have many common features, some of which drive their design. In general, these actuators must provide precise and repeatable positioning under significant loads during operation and they must withstand even higher loads for survival conditions. For general safety, they typically must hold position in the event of a power failure and must incorporate position limits, whether electrical, mechanical, or both. Because the number of actuators is generally high for large active surfaces (hundreds or even thousands of actuators), they must also be reliable and of reasonable individual cost. Finally, for maximum flexibility in their installation, they must be compact. This paper presents a concept for an active surface actuator based on a form-closed eccentric cam (kinematically, a Scotch Yoke mechanism). Such a design is limited in stroke, but offers potential advantages in terms of manufacture, compactness, measurement, and survival loading. The paper demonstrates that some of the expected advantages cannot be practically realized, due to dimensions that are driven by survival loading conditions. As a result, this concept is likely to offer an advantage over conventional screw-type actuators only for cases where actuator runaway and stall are the driving considerations.
Proceedings ArticleDOI
10 May 2015
TL;DR: In this paper, the scaling of the nonlinear response of a single-interface plasmonic waveguide is studied, where both the metal and dielectric display nonlinearity.
Abstract: The scaling of the nonlinear response of a single-interface plasmonic waveguide is studied, where both the metal and dielectric display nonlinearity We introduce a figure-of-merit that guides metal/dielectric nanophotonic device design for specific applications
Proceedings ArticleDOI
01 Oct 1996
TL;DR: In this paper, a narrow angle feed horn radiating low levels of cross polarisation in two widely separated frequency bands is presented, using corrugations to control the cross polarization in the lower frequency band and a synthesised aperture distribution controlled by a TM 11 mode transducer in the input waveguide to reduce cross polarised in the upper frequency band.
Abstract: The design for a narrow angle feed horn radiating low levels of cross polarisation in two widely separated frequency bands is presented. The horn uses corrugations to control the cross polarisation in the lower frequency band and a synthesised aperture distribution controlled by a TM 11 mode transducer in the input waveguide to reduce cross polarisation in the upper frequency band. Provisional theoretical radiation patterns and VSWR characteristics are included to indicate antenna performance.

Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

28 Jul 2005
TL;DR: PfPMP1)与感染红细胞、树突状组胞以及胎盘的单个或多个受体作用,在黏附及免疫逃避中起关键的作�ly.
Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1(PfPMP1)与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用,在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员,通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

18,940 citations

Journal ArticleDOI
TL;DR: A review of gold nanoparticles can be found in this article, where the most stable metal nanoparticles, called gold colloids (AuNPs), have been used for catalysis and biology applications.
Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

11,752 citations

Journal ArticleDOI
14 Aug 2003-Nature
TL;DR: By altering the structure of a metal's surface, the properties of surface plasmons—in particular their interaction with light—can be tailored, which could lead to miniaturized photonic circuits with length scales that are much smaller than those currently achieved.
Abstract: Surface plasmons are waves that propagate along the surface of a conductor. By altering the structure of a metal's surface, the properties of surface plasmons--in particular their interaction with light--can be tailored, which offers the potential for developing new types of photonic device. This could lead to miniaturized photonic circuits with length scales that are much smaller than those currently achieved. Surface plasmons are being explored for their potential in subwavelength optics, data storage, light generation, microscopy and bio-photonics.

10,689 citations

Journal ArticleDOI
01 Apr 1988-Nature
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

9,929 citations