David S. Hecht

Bio: David S. Hecht is an academic researcher from University of California, Los Angeles. The author has contributed to research in topics: Carbon nanotube & Nanotube. The author has an hindex of 21, co-authored 32 publications receiving 6635 citations. Previous affiliations of David S. Hecht include Pharmaceutical Product Development & Max Planck Society.

Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures

Abstract: Transparent electrodes are a necessary component in many modern devices such as touch screens, LCDs, OLEDs, and solar cells, all of which are growing in demand. Traditionally, this role has been well served by doped metal oxides, the most common of which is indium tin oxide, or ITO. Recently, advances in nano-materials research have opened the door for other transparent conductive materials, each with unique properties. These include CNTs, graphene, metal nanowires, and printable metal grids. This review will explore the materials properties of transparent conductors, covering traditional metal oxides and conductive polymers initially, but with a focus on current developments in nano-material coatings. Electronic, optical, and mechanical properties of each material will be discussed, as well as suitability for various applications.

Percolation in transparent and conducting carbon nanotube networks

Abstract: Ultrathin, uniform single-walled carbon nanotube networks of varying densities have been fabricated at room temperature by a vacuum filtration method. Measurements of the sheet conductance as a function of nanotube network density show 2D percolation behavior. In addition, the network transparency in the visible spectral range was examined and the results are in agreement with a standard thin-film model: fits to the standard theory indicate U ac ) Udc for transmission measurements at 550 nm. Transmission measurements also indicate the usefulness of nanotube network films as a transparent, conductive coating. Avenues for improvement of the network conductance are discussed.

Transparent and flexible carbon nanotube transistors.

Abstract: We report the fabrication of transparent and flexible transistors where both the bottom gate and the conducting channel are carbon nanotube networks of different densities and Parylene N is the gate insulator. Device mobilities of 1 cm2 V -1 s -1 and on/off ratios of 100 are obtained, with the latter influenced by the properties of the insulating layer. Repetitive bending has minor influence on the characteristics, with full recovery after repeated bending. The operation is insensitive to visible light and the gating does not influence the transmission in the visible spectral range. The quest for flexible and transparent transistors has recently resulted in several noteworthy achievements. Transparent transistors have been fabricated using both polymers 1-3 and inorganic oxides. 4,5 These advances, notable in the emerging technology arena that is generally called “plastic electronics”, have received wide publicity. Both, nevertheless, have significant deficiencies. The former have low mobility and the latter do not have the desired flexibility and are not easily manufacturable. These factors severely limit the application potential of the devices. Our method introduces a transistor architecture that potentially includes only two materials: carbon nanotubes (NTs) and a polymeric gate insulator. This simplicity of structure would ensure a simple manufacturing process.

Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures

Abstract: Transparent electrodes are a necessary component in many modern devices such as touch screens, LCDs, OLEDs, and solar cells, all of which are growing in demand. Traditionally, this role has been well served by doped metal oxides, the most common of which is indium tin oxide, or ITO. Recently, advances in nano-materials research have opened the door for other transparent conductive materials, each with unique properties. These include CNTs, graphene, metal nanowires, and printable metal grids. This review will explore the materials properties of transparent conductors, covering traditional metal oxides and conductive polymers initially, but with a focus on current developments in nano-material coatings. Electronic, optical, and mechanical properties of each material will be discussed, as well as suitability for various applications.

Roll-to-roll production of 30-inch graphene films for transparent electrodes

Abstract: The outstanding electrical, mechanical and chemical properties of graphene make it attractive for applications in flexible electronics. However, efforts to make transparent conducting films from graphene have been hampered by the lack of efficient methods for the synthesis, transfer and doping of graphene at the scale and quality required for applications. Here, we report the roll-to-roll production and wet-chemical doping of predominantly monolayer 30-inch graphene films grown by chemical vapour deposition onto flexible copper substrates. The films have sheet resistances as low as approximately 125 ohms square(-1) with 97.4% optical transmittance, and exhibit the half-integer quantum Hall effect, indicating their high quality. We further use layer-by-layer stacking to fabricate a doped four-layer film and measure its sheet resistance at values as low as approximately 30 ohms square(-1) at approximately 90% transparency, which is superior to commercial transparent electrodes such as indium tin oxides. Graphene electrodes were incorporated into a fully functional touch-screen panel device capable of withstanding high strain.

Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material

Abstract: The integration of novel materials such as single-walled carbon nanotubes and nanowires into devices has been challenging, but developments in transfer printing and solution-based methods now allow these materials to be incorporated into large-area electronics1,2,3,4,5,6. Similar efforts are now being devoted to making the integration of graphene into devices technologically feasible7,8,9,10. Here, we report a solution-based method that allows uniform and controllable deposition of reduced graphene oxide thin films with thicknesses ranging from a single monolayer to several layers over large areas. The opto-electronic properties can thus be tuned over several orders of magnitude, making them potentially useful for flexible and transparent semiconductors or semi-metals. The thinnest films exhibit graphene-like ambipolar transistor characteristics, whereas thicker films behave as graphite-like semi-metals. Collectively, our deposition method could represent a route for translating the interesting fundamental properties of graphene into technologically viable devices.

Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes

Abstract: Transparent films of carbon nanotubes can accommodate strains of up to 150% and demonstrate conductivities as high as 2,200 S cm−1 in the stretched state.

Chemically derived graphene oxide: towards large-area thin-film electronics and optoelectronics.

Abstract: Chemically derived graphene oxide (GO) possesses a unique set of properties arising from oxygen functional groups that are introduced during chemical exfoliation of graphite. Large-area thin-film deposition of GO, enabled by its solubility in a variety of solvents, offers a route towards GO-based thin-film electronics and optoelectronics. The electrical and optical properties of GO are strongly dependent on its chemical and atomic structure and are tunable over a wide range via chemical engineering. In this Review, the fundamental structure and properties of GO-based thin films are discussed in relation to their potential applications in electronics and optoelectronics.

25th Anniversary Article: The Evolution of Electronic Skin (E-Skin): A Brief History, Design Considerations, and Recent Progress

Abstract: Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future.