David Schurig

Bio: David Schurig is an academic researcher from University of Utah. The author has contributed to research in topics: Metamaterial & Lens (optics). The author has an hindex of 33, co-authored 107 publications receiving 22899 citations. Previous affiliations of David Schurig include Duke University & University of California, San Diego.

Evanescent electromagnetic wave conversion lenses III

Abstract: Apparatus, methods, and systems provide conversion of evanescent electromagnetic waves to non-evanescent electromagnetic waves and/or conversion of non-evanescent electromagnetic waves to evanescent electromagnetic waves. In some approaches the conversion includes propagation of electromagnetic waves within an indefinite electromagnetic medium, and the indefinite medium may include an artificially-structured material such as a layered structure or other metamaterial.

Interferometric direction finding with a metamaterial detector

Abstract: We present measurements and analysis demonstrating useful direction finding of sources in the S band (2–4 GHz) using a metamaterial detector. An augmented metamaterial absorber that supports magnitude and phase measurement of the incident electric field, within each unit cell, is described. The metamaterial is implemented in a commercial printed circuit board process with off-board back-end electronics. We also discuss on-board back-end implementation strategies. Direction finding performance is analyzed for the fabricated metamaterial detector using simulated data and the standard algorithm, MUtiple SIgnal Classification. The performance of this complete system is characterized by its angular resolution as a function of radiation density at the detector. Sources with power outputs typical of mobile communication devices can be resolved at kilometer distances with sub-degree resolution and high frame rates.

Effective Conductivity of Additive-Manufactured Metals for Microwave Feed Components

Abstract: This paper characterizes the effective conductivity of lossy metal materials fabricated with additive manufacturing processes at microwave frequencies using a resonant cavity approach. Specifically addressed is the powder bed fusion additive manufacturing process utilizing AlSi10Mg material at Ku-band. The details of the procedure for converting device parameters that characterize the resonant cavity to material properties are given. Trade-offs between the precision of the conductivity and the quality factor of the cavity are discussed relevant to the design of the cavity. A best-fit matching procedure is made between the measured response of the manufactured cavities and the simulated results. The conductivity with statistical deviation for various fabricated cavities from different vendors is reported. Examples of various designs of fabricated prototype waveguide feed components are presented. The predicted and measured performance of each component is compared, validating the process.

Design, construction and operation of a low-power, autonomous radio-frequency data-acquisition station for the TARA experiment

Abstract: Employing a 40-kW, 54.1 MHz radio-frequency transmitter just west of Delta, UT, the TARA (Telescope Array RAdar) experiment seeks radar detection of extensive air showers (EAS) initiated by ultra-high energy cosmic rays (UHECR). For UHECR with energies in excess of 10 19 eV , the Doppler-shifted “chirps” resulting from EAS shower core radar reflections should be observable above background (dominantly galactic) at distances of tens of km from the TARA transmitter. In order to stereoscopically reconstruct cosmic ray chirps, two remote, autonomous self-powered receiver stations have been deployed. Each remote station (RS) combines both low power consumption and low cost. Triggering logic, the powering and communication systems, and some specific details of hardware components are discussed.

Controlling Electromagnetic Fields

Abstract: Using the freedom of design that metamaterials provide, we show how electromagnetic fields can be redirected at will and propose a design strategy. The conserved fields-electric displacement field D, magnetic induction field B, and Poynting vector B-are all displaced in a consistent manner. A simple illustration is given of the cloaking of a proscribed volume of space to exclude completely all electromagnetic fields. Our work has relevance to exotic lens design and to the cloaking of objects from electromagnetic fields.

Metamaterial Electromagnetic Cloak at Microwave Frequencies

Abstract: A recently published theory has suggested that a cloak of invisibility is in principle possible, at least over a narrow frequency band. We describe here the first practical realization of such a cloak; in our demonstration, a copper cylinder was "hidden" inside a cloak constructed according to the previous theoretical prescription. The cloak was constructed with the use of artificially structured metamaterials, designed for operation over a band of microwave frequencies. The cloak decreased scattering from the hidden object while at the same time reducing its shadow, so that the cloak and object combined began to resemble empty space.

Light Propagation with Phase Discontinuities: Generalized Laws of Reflection and Refraction

Abstract: Conventional optical components rely on gradual phase shifts accumulated during light propagation to shape light beams. New degrees of freedom are attained by introducing abrupt phase changes over the scale of the wavelength. A two-dimensional array of optical resonators with spatially varying phase response and subwavelength separation can imprint such phase discontinuities on propagating light as it traverses the interface between two media. Anomalous reflection and refraction phenomena are observed in this regime in optically thin arrays of metallic antennas on silicon with a linear phase variation along the interface, which are in excellent agreement with generalized laws derived from Fermat’s principle. Phase discontinuities provide great flexibility in the design of light beams, as illustrated by the generation of optical vortices through use of planar designer metallic interfaces.

Perfect metamaterial absorber.

Abstract: We present the design for an absorbing metamaterial (MM) with near unity absorbance A(omega). Our structure consists of two MM resonators that couple separately to electric and magnetic fields so as to absorb all incident radiation within a single unit cell layer. We fabricate, characterize, and analyze a MM absorber with a slightly lower predicted A(omega) of 96%. Unlike conventional absorbers, our MM consists solely of metallic elements. The substrate can therefore be optimized for other parameters of interest. We experimentally demonstrate a peak A(omega) greater than 88% at 11.5 GHz.

Flat Optics With Designer Metasurfaces

Abstract: Metamaterials are artificially fabricated materials that allow for the control of light and acoustic waves in a manner that is not possible in nature. This Review covers the recent developments in the study of so-called metasurfaces, which offer the possibility of controlling light with ultrathin, planar optical components. Conventional optical components such as lenses, waveplates and holograms rely on light propagation over distances much larger than the wavelength to shape wavefronts. In this way substantial changes of the amplitude, phase or polarization of light waves are gradually accumulated along the optical path. This Review focuses on recent developments on flat, ultrathin optical components dubbed 'metasurfaces' that produce abrupt changes over the scale of the free-space wavelength in the phase, amplitude and/or polarization of a light beam. Metasurfaces are generally created by assembling arrays of miniature, anisotropic light scatterers (that is, resonators such as optical antennas). The spacing between antennas and their dimensions are much smaller than the wavelength. As a result the metasurfaces, on account of Huygens principle, are able to mould optical wavefronts into arbitrary shapes with subwavelength resolution by introducing spatial variations in the optical response of the light scatterers. Such gradient metasurfaces go beyond the well-established technology of frequency selective surfaces made of periodic structures and are extending to new spectral regions the functionalities of conventional microwave and millimetre-wave transmit-arrays and reflect-arrays. Metasurfaces can also be created by using ultrathin films of materials with large optical losses. By using the controllable abrupt phase shifts associated with reflection or transmission of light waves at the interface between lossy materials, such metasurfaces operate like optically thin cavities that strongly modify the light spectrum. Technology opportunities in various spectral regions and their potential advantages in replacing existing optical components are discussed.