David Schurig

Bio: David Schurig is an academic researcher from University of Utah. The author has contributed to research in topics: Metamaterial & Lens (optics). The author has an hindex of 33, co-authored 107 publications receiving 22899 citations. Previous affiliations of David Schurig include Duke University & University of California, San Diego.

An aberration-free lens with zero F-number

Abstract: Starting from the Luneberg lens index profile, we apply the transformation design method to the problem of far-field imaging of (infinitely) distant objects. This analysis yields a single element lens with a planar image surface, zero aberrations of all orders, zero F-number and (in some cases) constant aperture for all angles of incidence.

Free space microwave focusing by a negative-index gradient lens

Abstract: Metamaterial structures designed to have simultaneously negative permittivity and permeability are known as left-handed materials. Their complexity and our understanding of their properties have advanced rapidly to the point where direct applications are now viable. We present a radial gradient-index (GRIN) lens with an index-of-refraction ranging from -2.67(edge) to -0.97(center). Experimentally, we find the lens can produce field intensities at the focus that are greater than that of the incident plane wave. These results are obtained at 10.45 GHz and in excellent agreement with full-wave simulations. This lens is a demonstrate an newly pioneered advanced fabrication technique using conventional printed circuit board (PCB) technology which offers significant design, mechanical, and cost advantages over other microwave lens constructions.

Sub-diffraction imaging with compensating bilayers

Abstract: We derive a general expression for the material properties of a compensating bilayer, which is a pair of material layers which transfer the field distribution from one side of the bilayer to the other with resolution limited only by the deviation of the material properties from specified values. One of the layers can be free space, a special case of which is the perfect lens, but the layers need not have equal thickness. Compensating a thick layer of free space with a thin layer creates a focusing device with increased working distance, and employs an anisotropic material. It is also possible to achieve compensation of materials with property tensors that are neither positive nor negative definite. In this case, we refer to such media as indefinite, and we analyse, in detail, bilayers of these media which support coupling of internal propagating waves to incident waves of any transverse wave vector. In this case, we find that the enhanced spatial resolution provided by large transverse wave vectors is far less sensitive to loss than that of the perfect lens.

POWDER: Platform for Open Wireless Data-driven Experimental Research

Abstract: This paper provides an overview of the Platform for Open Wireless Data-driven Experimental Research (POWDER). POWDER is a city-scale, remotely accessible, end-to-end software defined platform to support mobile and wireless research. Compared to other mobile and wireless testbeds POWDER provides advances in scale, realism, diversity, flexibility, and access.

Controlling Electromagnetic Fields

Abstract: Using the freedom of design that metamaterials provide, we show how electromagnetic fields can be redirected at will and propose a design strategy. The conserved fields-electric displacement field D, magnetic induction field B, and Poynting vector B-are all displaced in a consistent manner. A simple illustration is given of the cloaking of a proscribed volume of space to exclude completely all electromagnetic fields. Our work has relevance to exotic lens design and to the cloaking of objects from electromagnetic fields.

Metamaterial Electromagnetic Cloak at Microwave Frequencies

Abstract: A recently published theory has suggested that a cloak of invisibility is in principle possible, at least over a narrow frequency band. We describe here the first practical realization of such a cloak; in our demonstration, a copper cylinder was "hidden" inside a cloak constructed according to the previous theoretical prescription. The cloak was constructed with the use of artificially structured metamaterials, designed for operation over a band of microwave frequencies. The cloak decreased scattering from the hidden object while at the same time reducing its shadow, so that the cloak and object combined began to resemble empty space.

Light Propagation with Phase Discontinuities: Generalized Laws of Reflection and Refraction

Abstract: Conventional optical components rely on gradual phase shifts accumulated during light propagation to shape light beams. New degrees of freedom are attained by introducing abrupt phase changes over the scale of the wavelength. A two-dimensional array of optical resonators with spatially varying phase response and subwavelength separation can imprint such phase discontinuities on propagating light as it traverses the interface between two media. Anomalous reflection and refraction phenomena are observed in this regime in optically thin arrays of metallic antennas on silicon with a linear phase variation along the interface, which are in excellent agreement with generalized laws derived from Fermat’s principle. Phase discontinuities provide great flexibility in the design of light beams, as illustrated by the generation of optical vortices through use of planar designer metallic interfaces.

Perfect metamaterial absorber.

Abstract: We present the design for an absorbing metamaterial (MM) with near unity absorbance A(omega). Our structure consists of two MM resonators that couple separately to electric and magnetic fields so as to absorb all incident radiation within a single unit cell layer. We fabricate, characterize, and analyze a MM absorber with a slightly lower predicted A(omega) of 96%. Unlike conventional absorbers, our MM consists solely of metallic elements. The substrate can therefore be optimized for other parameters of interest. We experimentally demonstrate a peak A(omega) greater than 88% at 11.5 GHz.

Flat Optics With Designer Metasurfaces

Abstract: Metamaterials are artificially fabricated materials that allow for the control of light and acoustic waves in a manner that is not possible in nature. This Review covers the recent developments in the study of so-called metasurfaces, which offer the possibility of controlling light with ultrathin, planar optical components. Conventional optical components such as lenses, waveplates and holograms rely on light propagation over distances much larger than the wavelength to shape wavefronts. In this way substantial changes of the amplitude, phase or polarization of light waves are gradually accumulated along the optical path. This Review focuses on recent developments on flat, ultrathin optical components dubbed 'metasurfaces' that produce abrupt changes over the scale of the free-space wavelength in the phase, amplitude and/or polarization of a light beam. Metasurfaces are generally created by assembling arrays of miniature, anisotropic light scatterers (that is, resonators such as optical antennas). The spacing between antennas and their dimensions are much smaller than the wavelength. As a result the metasurfaces, on account of Huygens principle, are able to mould optical wavefronts into arbitrary shapes with subwavelength resolution by introducing spatial variations in the optical response of the light scatterers. Such gradient metasurfaces go beyond the well-established technology of frequency selective surfaces made of periodic structures and are extending to new spectral regions the functionalities of conventional microwave and millimetre-wave transmit-arrays and reflect-arrays. Metasurfaces can also be created by using ultrathin films of materials with large optical losses. By using the controllable abrupt phase shifts associated with reflection or transmission of light waves at the interface between lossy materials, such metasurfaces operate like optically thin cavities that strongly modify the light spectrum. Technology opportunities in various spectral regions and their potential advantages in replacing existing optical components are discussed.