Davide Peddis

Bio: Davide Peddis is an academic researcher from University of Genoa. The author has contributed to research in topics: Magnetic nanoparticles & Magnetization. The author has an hindex of 32, co-authored 153 publications receiving 3397 citations. Previous affiliations of Davide Peddis include University of Cagliari & Technical University of Denmark.

Spin-glass-like freezing and enhanced magnetization in ultra-small CoFe2O4 nanoparticles

Abstract: The magnetic properties of ultra-small (3 nm) CoFe2O4 nanoparticles have been investigated by DC magnetization measurements as a function of temperature and magnetic field. The main features of the magnetic behaviour are blocking of non-interacting particle moments (zero-field-cooled magnetization Tmax≈40 K), a rapid increase of saturation magnetization (up to values higher than for the bulk material) at low T and an increase in anisotropy below 30 K due to the appearance of exchange bias. The low temperature behaviour is determined by a random freezing of surface spins. Localized spin-canting and cation distribution between the two sublattices of the spinel structure account quantitatively for the observed increase in saturation magnetization.

Interparticle Interactions and Magnetic Anisotropy in Cobalt Ferrite Nanoparticles: Influence of Molecular Coating

Abstract: Molecular coating of nanoparticles represents probably the most important and, at the same time, critical step to design new nanostructured magnetic materials. The interaction between molecules and surface atoms leads to a strong modification of surface magnetic properties, that are one of the key points in the physics of magnetic nanoparticles. In this paper the magnetic properties of CoFe2O4 nanoparticles (⟨D⟩ ≅ 4–8 nm) coated with oleic acid have been investigated in order to clarify the role of the molecular coating on the interparticle interactions and surface anisotropy. An increase of magnetic anisotropy (i.e., coercive field and anisotropy constant) with particle size is observed in coated nanoparticles, indicating that the magnetic anisotropy is governed mainly by its magneto-crystalline component. The removal of molecular coating induces a strong increase of anisotropy, because of the increase of its surface component, as indicated by the increase of exchange bias field.

Studying the effect of Zn-substitution on the magnetic and hyperthermic properties of cobalt ferrite nanoparticles

Abstract: The possibility to finely control nanostructured cubic ferrites (M(II)Fe2O4) paves the way to design materials with the desired magnetic properties for specific applications. However, the strict and complex interrelation among the chemical composition, size, polydispersity, shape and surface coating renders their correlation with the magnetic properties not trivial to predict. In this context, this work aims to discuss the magnetic properties and the heating abilities of Zn-substituted cobalt ferrite nanoparticles with different zinc contents (ZnxCo1-xFe2O4 with 0 100 emu g(-1)). The increase in the zinc content up to x = 0.46 in the structure has resulted in an increase of the saturation magnetisation (Ms) at 5 K. High Ms values have also been revealed at room temperature (∼90 emu g(-1)) for both CoFe2O4 and Zn0.30Co0.70Fe2O4 samples and their heating ability has been tested. Despite a similar saturation magnetisation, the specific absorption rate value for the cobalt ferrite is three times higher than the Zn-substituted one. DC magnetometry results were not sufficient to justify these data, the experimental conditions of SAR and static measurements being quite different. The synergic combination of DC with AC magnetometry and (57)Fe Mossbauer spectroscopy represents a powerful tool to get new insights into the design of suitable heat mediators for magnetic fluid hyperthermia.

CoFe2O4 and CoFe2O4/SiO2 Core/Shell Nanoparticles: Magnetic and Spectroscopic Study

Abstract: Spherical nanoparticles of surfactant-coated CoFe2O4 (core) were prepared through thermal decomposition of metal acetylacetonates in the presence of a mixture of oleic acid and oleylamine and uniformly coated with silica shell by using tetraethylorthosilicate (TEOS) and ammonia in a micellar solution (core/shell). Transmission electron microscopy (TEM) analysis of core/shell nanoparticles evidenced the high homogeneity of the coating process in producing single core/shell nanoparticles with a narrow size distribution. The combined use of spectroscopic studies (NMR and FTIR) on core and core/shell nanoparticles pointed out that the surfactants’ layer bound to the surface core nanoparticles is retained also after the silica coating process. This allows to obtaining systems with very similar magnetic behavior but weaker dipolar interparticle interactions and lower values of saturation magnetization. In view of the interest in biomedical field, the effect of the CoFe2O4 nanoparticles silica coating was also s...

Cationic distribution and spin canting in CoFe2O4 nanoparticles.

Abstract: CoFe(2)O(4) nanoparticles ( D(NPD) ~6 nm), prepared by a thermal decomposition technique, have been investigated through the combined use of dc magnetization measurements, neutron diffraction, and (57)Fe Mossbauer spectrometry under high applied magnetic field. Despite the small particle size, the value of saturation magnetization at 300 K (M(s) = 70 A m(2) kg(-1)) and at 5 K (M(s) = 100 A m(2) kg(-1)) are rather close to the bulk values, making the samples prepared with this method attractive for biomedical applications. Neutron diffraction measurements indicate the typical ferrimagnetic structure of the ferrites, showing an inversion degree (γ(NPD) = 0.74) that is in very good agreement with cationic distribution established from low temperature (10 K) Mossbauer measurements in high magnetic field (γ(moss) = 0.76). In addition, the in-field Mossbauer spectrum shows the presence of a non-collinear spin structure in both A and B sublattices. The results allow us to explain the high value of saturation magnetization and provide a better insight into the complex interplay between cationic distribution and magnetic disorder in ferrimagnetic nanoparticles.

Cobalt-catalyzed sulfate radical-based advanced oxidation: A review on heterogeneous catalysts and applications

Abstract: Recently sulfate radical-based advanced oxidation processes (SR-AOPs) attract increasing attention due to their capability and adaptability in decontamination. The couple of cobalt and peroxymonosulfate (PMS) is an efficient way to produce reactive sulfate radicals. This article reviews the state-of-the-art progress on various heterogeneous cobalt-based catalysts for PMS activation, including cobalt oxides, cobalt-ferrite and supported cobalt by diverse substrates. We summarize the intrinsic properties of these catalysts and their fundamental behaviors in PMS activation, as well as synthetic approaches. In addition, influencing factors and synergistic techniques of Co/PMS systems in organic degradation and possible environmental applications are also discussed. Finally, we propose perspectives on challenges related to cobalt-based catalysts, heterogeneous Co/PMS systems and their potential applications in practical environmental cleanup.

Characterization techniques for nanoparticles: comparison and complementarity upon studying nanoparticle properties

Abstract: Nanostructures have attracted huge interest as a rapidly growing class of materials for many applications. Several techniques have been used to characterize the size, crystal structure, elemental composition and a variety of other physical properties of nanoparticles. In several cases, there are physical properties that can be evaluated by more than one technique. Different strengths and limitations of each technique complicate the choice of the most suitable method, while often a combinatorial characterization approach is needed. In addition, given that the significance of nanoparticles in basic research and applications is constantly increasing, it is necessary that researchers from separate fields overcome the challenges in the reproducible and reliable characterization of nanomaterials, after their synthesis and further process (e.g. annealing) stages. The principal objective of this review is to summarize the present knowledge on the use, advances, advantages and weaknesses of a large number of experimental techniques that are available for the characterization of nanoparticles. Different characterization techniques are classified according to the concept/group of the technique used, the information they can provide, or the materials that they are destined for. We describe the main characteristics of the techniques and their operation principles and we give various examples of their use, presenting them in a comparative mode, when possible, in relation to the property studied in each case.

Solution Combustion Synthesis of Nanoscale Materials

Abstract: Solution combustion is an exciting phenomenon, which involves propagation of self-sustained exothermic reactions along an aqueous or sol–gel media. This process allows for the synthesis of a variety of nanoscale materials, including oxides, metals, alloys, and sulfides. This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years. Thermodynamics and kinetics of reactive solutions used in different chemical routes are considered, and the role of process parameters is discussed, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions. The basic principles for controlling the composition, structure, and nanostructure of SCS products, and routes to regulate the size and morphology of the nanoscale materials are also reviewed. Recently developed systems that lead to the formation of novel materials and unique structures (e.g., thin films and two-dimensional crystals) with unusual...