Deepika Bhattu

Bio: Deepika Bhattu is an academic researcher from Paul Scherrer Institute. The author has contributed to research in topics: Aerosol & Environmental chemistry. The author has an hindex of 16, co-authored 35 publications receiving 623 citations. Previous affiliations of Deepika Bhattu include Indian Institute of Technology Kanpur & Indian Institutes of Technology.

CCN closure study: Effects of aerosol chemical composition and mixing state

Abstract: This study presents a detailed cloud condensation nuclei (CCN) closure study that investigates the effects of chemical composition (bulk and size resolved) and mixing state (internal and external) on CCN activity of aerosols. Measurements of the chemical composition, aerosol size distribution, total number concentration, and CCN concentration at supersaturation (SS = 0.2–1.0%) were performed during the winter season in Kanpur, India. Among the two cases considered here, better closure results are obtained for case 1 (low total aerosol loading, 49.54 ± 26.42 μg m−3, and high O:C ratio, 0.61 ± 0.07) compared to case 2 (high total aerosol loading, 101.05 ± 18.73 μg m−3, and low O:C ratio, 0.42 ± 0.06), with a maximum reduction of 3–81% in CCN overprediction for all depleted SS values (0.18–0.60%). Including the assumption that less volatile oxidized organic aerosols represent the soluble organic fraction reduced the overprediction to at most 40% and 129% in the internal and external mixing scenarios, respectively. At higher depleted SS values (0.34–0.60%), size-resolved chemical composition with an internal mixing state performed well in CCN closure among all organic solubility scenarios. However, at a lower depleted SS value (0.18%), closure is found to be more sensitive to both the chemical composition and mixing state of aerosols. At higher SS values, information on the solubility of organics and size-resolved chemical composition is required for accurate CCN predictions, whereas at lower SS values, information on the mixing state in addition to the solubility of organics and size-resolved chemical composition is required. Overall, κtotal values are observed to be independent of the O:C ratio [κtotal = (0.36 ± 0.01) × O:C − (0.03 ± 0.01)] in the range of 0.2

Real-time measurements of ambient aerosols in a polluted Indian city: Sources, characteristics, and processing of organic aerosols during foggy and nonfoggy periods

Abstract: A detailed time-resolved chemical characterization of ambient nonrefractory submicron aerosols (NR-PM1) was conducted for the first time in India. The measurements were performed during the winter (November 2011 to January 2012) in a heavily polluted city of Kanpur, which is situated in the Indo-Gangetic Plain. Real-time measurements provided new insights into the sources and evolution of organic aerosols (OA) that could not be obtained using previously deployed filter-based measurements at this site. The average NR-PM1 loading was very high (>100 µg/m3) throughout the study, with OA contributing approximately 70% of the total aerosol mass. Source apportionment of the OA using positive matrix factorization revealed large contributions from fresh and aged biomass burning OA throughout the entire study period. A back trajectory analysis showed that the polluted air masses were affected by local sources and distant source regions where the burning of paddy residues occurs annually during winter. Several fog episodes were encountered during the study, and the OA composition varied between foggy and nonfoggy periods, with higher oxygen to carbon (O/C) ratios during the foggy periods. The evolution of OA and their elemental ratios (O:C and H:C) were investigated for the possible effects of fog processing.

Chemical Characterization of Summertime Dust Events at Kanpur: Insight into the Sources and Level of Mixing with Anthropogenic Emissions

Abstract: The aim of this study conducted at Kanpur (26.51°N, 80.23°E), India, was to quantify chemical properties of dust and the intensity of mixing, due to its interaction with various emissions from anthropogenic activities, during its long range transport. Aerosol mass was collected at Indian Institute of Technology, Kanpur (IIT-K) located in the Indo-Gangetic Plain from April–July 2011, a period marked by intense dust storms and onset of monsoon. The sampling days were classified as Dust, Polluted Dust1 (PD1), Polluted Dust2 (PD2) and Continental days. PM10 (coarse mode) and PM2.5 (fine mode) collected on filter substrates were analysed for chemical composition. Elemental concentrations were measured using Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). The results show that crustal elements like Ca, Fe, K, Na and Mg were dominant in coarse mode during dusty days, whereas, elements of anthropogenic origin like Cu, Ni, Se and V were mostly concentrated in fine mode during PD1 as well as PD2. Very low elemental concentrations were found during continental days. SO4 2– , Cl – and NO3 – were found to be high during PD1 and PD2 days. Very good correlations of NH4 + with Cl – and SO4 2– ions in PD1 days indicate their common sources of origin and formation of ammonium chloride and ammonium sulphate. Water Soluble Inorganic Carbon (WSIC) was found during all dust days, Water Soluble Organic Carbon (WSOC) was found to be highest during PD1 and PD2 days.

Rapid aerosol particle growth and increase of cloud condensation nucleus activity by secondary aerosol formation and condensation: A case study for regional air pollution in northeastern China

Abstract: [1] This study was part of the international field measurement Campaigns of Air Quality Research in Beijing and Surrounding Region 2006 (CAREBeijing-2006). We investigated a new particle formation event in a highly polluted air mass at a regional site south of the megacity Beijing and its impact on the abundance and properties of cloud condensation nuclei (CCN). During the 1-month observation, particle nucleation followed by significant particle growth on a regional scale was observed frequently (~30%), and we chose 23 August 2006 as a representative case study. Secondary aerosol mass was produced continuously, with sulfate, ammonium, and organics as major components. The aerosol mass growth rate was on average 19 μg m -3 h -1 during the late hours of the day. This growth rate was observed several times during the 1-month intensive measurements. The nucleation mode grew very quickly into the size range of CCN, and the CCN size distribution was dominated by the growing nucleation mode (up to 80% of the total CCN number concentration) and not as usual by the accumulation mode. At water vapor supersaturations of 0.07-0.86%, the CCN number concentrations reached maximum values of 4000-19,000 cm -3 only 6-14 h after the nucleation event. During particle formation and growth, the effective hygroscopicity parameter κ increased from about 0.1-0.3 to 0.35-0.5 for particles with diameters of 40-90 nm, but it remained nearly constant at ~0.45 for particles with diameters of ~190 nm. This result is consistent with aerosol chemical composition data, showing a pronounced increase of sulfate.

Sources of particulate-matter air pollution and its oxidative potential in Europe.

Abstract: Particulate matter is a component of ambient air pollution that has been linked to millions of annual premature deaths globally1–3. Assessments of the chronic and acute effects of particulate matter on human health tend to be based on mass concentration, with particle size and composition also thought to play a part4. Oxidative potential has been suggested to be one of the many possible drivers of the acute health effects of particulate matter, but the link remains uncertain5–8. Studies investigating the particulate-matter components that manifest an oxidative activity have yielded conflicting results7. In consequence, there is still much to be learned about the sources of particulate matter that may control the oxidative potential concentration7. Here we use field observations and air-quality modelling to quantify the major primary and secondary sources of particulate matter and of oxidative potential in Europe. We find that secondary inorganic components, crustal material and secondary biogenic organic aerosols control the mass concentration of particulate matter. By contrast, oxidative potential concentration is associated mostly with anthropogenic sources, in particular with fine-mode secondary organic aerosols largely from residential biomass burning and coarse-mode metals from vehicular non-exhaust emissions. Our results suggest that mitigation strategies aimed at reducing the mass concentrations of particulate matter alone may not reduce the oxidative potential concentration. If the oxidative potential can be linked to major health impacts, it may be more effective to control specific sources of particulate matter rather than overall particulate mass. Observations and air-quality modelling reveal that the sources of particulate matter and oxidative potential in Europe are different, implying that reducing mass concentrations of particulate matter alone may not reduce oxidative potential.

Investigation of the Sources and Processing of Organic Aerosol over the Central Mexican Plateau from Aircraft Measurements during MILAGRO

Abstract: Abstract. Organic aerosol (OA) represents approximately half of the submicron aerosol in Mexico City and the Central Mexican Plateau. This study uses the high time resolution measurements performed onboard the NCAR/NSF C-130 aircraft during the MILAGRO/MIRAGE-Mex field campaign in March 2006 to investigate the sources and chemical processing of the OA in this region. An examination of the OA/ΔCO ratio evolution as a function of photochemical age shows distinct behavior in the presence or absence of substantial open biomass burning (BB) influence, with the latter being consistent with other studies in polluted areas. In addition, we present results from Positive Matrix Factorization (PMF) analysis of 12-s High-Resolution Time-of-Flight Aerosol Mass Spectrometer (HR-ToF-AMS) OA spectra. Four components were resolved. Three of the components contain substantial organic oxygen and are termed semivolatile oxygenated OA (SV-OOA), low-volatility OOA (LV-OOA), and biomass burning OA (BBOA). A reduced "hydrocarbon-like OA" (HOA) component is also resolved. LV-OOA is highly oxygenated (atomic O/C~1) and is aged organic aerosol linked to regional airmasses, with likely contributions from pollution, biomass burning, and other sources. SV-OOA is strongly correlated with ammonium nitrate, Ox, and the Mexico City Basin. We interpret SV-OOA as secondary OA which is nearly all (>90%) anthropogenic in origin. In the absence of biomass burning it represents the largest fraction of OA over the Mexico City basin, consistent with other studies in this region. BBOA is identified as arising from biomass burning sources due to a strong correlation with HCN, and the elevated contribution of the ion C2H4O2+ (m/z 60, a marker for levoglucosan and other primary BB species). WRF-FLEXPART calculated fire impact factors (FIF) show good correlation with BBOA mass concentrations within the basin, but show location offsets in the far field due to model transport errors. This component is small or absent when forest fires are suppressed by precipitation. Since PMF factors represent organic species grouped by chemical similarity, additional postprocessing is needed to more directly apportion OA amounts to sources, which is done here based on correlations to different tracers. The postprocessed AMS results are similar to those from an independent source apportionment based on multiple linear regression with gas-phase tracers. During a flight with very high forest fire intensity near the basin OA arising from open BB represents ~66% of the OA mass in the basin and contributes similarly to OA mass in the outflow. Aging and SOA formation of BB emissions is estimated to add OA mass equivalent to about ~32–42% of the primary BBOA over several hours to a day.

Field evaluation of low-cost particulate matter sensors in high- and low-concentration environments

Abstract: . Low-cost particulate matter (PM) sensors are promising tools for supplementing existing air quality monitoring networks. However, the performance of the new generation of low-cost PM sensors under field conditions is not well understood. In this study, we characterized the performance capabilities of a new low-cost PM sensor model (Plantower model PMS3003) for measuring PM 2.5 at 1 min, 1 h, 6 h, 12 h, and 24 h integration times. We tested the PMS3003 sensors in both low-concentration suburban regions (Durham and Research Triangle Park (RTP), NC, US) with 1 h PM 2.5 (mean ± SD) of 9±9 and 10±3 µ g m −3 , respectively, and a high-concentration urban location (Kanpur, India) with 1 h PM 2.5 of 36±17 and 116±57 µ g m −3 during monsoon and post-monsoon seasons, respectively. In Durham and Kanpur, the sensors were compared to a research-grade instrument (environmental β attenuation monitor, E-BAM) to determine how these sensors perform across a range of PM 2.5 concentrations and meteorological factors (e.g., temperature and relative humidity, RH). In RTP, the sensors were compared to three Federal Equivalent Methods (FEMs) including two Teledyne model T640s and a Thermo Scientific model 5030 SHARP to demonstrate the importance of the type of reference monitor selected for sensor calibration. The decrease in 1 h mean errors of the calibrated sensors using univariate linear models from Durham (201 %) to Kanpur monsoon (46 %) and post-monsoon (35 %) seasons showed that PMS3003 performance generally improved as ambient PM 2.5 increased. The precision of reference instruments (T640: ±0.5 µ g m −3 for 1 h; SHARP: ±2 µ g m −3 for 24 h, better than the E-BAM) is critical in evaluating sensor performance, and β -attenuation-based monitors may not be ideal for testing PM sensors at low concentrations, as underscored by (1) the less dramatic error reduction over averaging times in RTP against optically based T640 (from 27 % for 1 h to 9 % for 24 h) than in Durham (from 201 % to 15 %); (2) the lower errors in RTP than the Kanpur post-monsoon season (from 35 % to 11 %); and (3) the higher T640–PMS3003 correlations ( R2≥0.63 ) than SHARP–PMS3003 ( R2≥0.25 ). A major RH influence was found in RTP (1 h RH = 64 ± 22 %) due to the relatively high precision of the T640 measurements that can explain up to ∼30 % of the variance in 1 min to 6 h PMS3003 PM 2.5 measurements. When proper RH corrections are made by empirical nonlinear equations after using a more precise reference method to calibrate the sensors, our work suggests that the PMS3003 sensors can measure PM 2.5 concentrations within ∼10 % of ambient values. We observed that PMS3003 sensors appeared to exhibit a nonlinear response when ambient PM 2.5 exceeded ∼125 µ g m −3 and found that the quadratic fit is more appropriate than the univariate linear model to capture this nonlinearity and can further reduce errors by up to 11 %. Our results have substantial implications for how variability in ambient PM 2.5 concentrations, reference monitor types, and meteorological factors can affect PMS3003 performance characterization.