Demetrio Gregoratto

Bio: Demetrio Gregoratto is an academic researcher from Public Health England. The author has contributed to research in topics: Absorbed dose & Monte Carlo method. The author has an hindex of 4, co-authored 6 publications receiving 53 citations.

Biokinetic data and models for occupational intake of lanthanoids.

Abstract: Purpose: This paper reviews data related to the behavior of the lanthanoid elements (lanthanum through lutetium, atomic numbers 57–71) in the human body and proposes biokinetic models for internall...

The Mayak Worker Dosimetry System (MWDS-2013): Uncertainty in the Measurement of Pu Activity in a 24-Hour Urine Sample of a Typical Mayak PA Worker

Abstract: In the Mayak Worker Dosimetry System (MWDS-2013), intakes of plutonium and organ doses are assessed on the basis of measurements made on the plutonium content of 56 400 urine samples. Altogether, there were urine bioassays for 7591 (29%) of the 25 757 cohort members who were employed any time at Mayak between 1948 and 1982. These measurements are subject to uncertainty due to many factors (e.g. whether or not creatinine is measured, the volume of the sample, whether diethylenetriaminepentaacetic acid was administered, etc.) and this uncertainty will affect not only the uncertainty in the estimated doses, but also the values of the doses themselves. Therefore, it is important for the estimated uncertainty to be as accurate as possible. The input to the dose calculation requires an estimate of the plutonium activity in a true 24-hour sample. The uncertainty in this activity is approximated by a lognormal distribution. The aim of this paper is to describe and justify how the parameters of this lognormal distribution are derived from the raw data. Histograms of the distribution of sample volumes are given for both sexes. The method of calculation of the decision threshold and relative standard uncertainty (RSU) of a measurement result for Pu activity in a worker's urine sample is shown. Diagrams of correlation between Pu activity in collected urine and its RSU are given.

30-Y follow-up of a PU/AM inhalation case

Abstract: In 1983, a young man inhaled accidentally a large amount of plutonium and americium. This case was carefully followed until 2013. Since no decorporation measures had been taken, the undisturbed metabolism of Pu and Am can be derived from the data. First objective was to determine the amount of inhaled radionuclides and to estimate committed effective dose. In vivo and excretion measurements started immediately after the inhalation, and for quality assurance, all types of measurements were performed by different labs in Europe and the USA. After dose assessment by various international groups were completed, the measurements were continued to produce scientific data for model validation. The data have been analysed here to estimate lung absorption parameter values for the inhaled plutonium and americium oxide using the proposed new ICRP Human Respiratory Tract Model. As supplement to the biokinetic modelling, biological data from three different cytogenetic markers have been added. The estimated committed effective dose is in the order of 1 Sv. The subject is 30 y after the inhalation, of good health, according to a recent medical check-up.

ICRP Publication 141: Occupational Intakes of Radionuclides: Part 4.

Abstract: The 2007 Recommendations (ICRP, 2007) introduced changes that affect the calculation of effective dose, and implied a revision of the dose coefficients for internal exposure, published previously in the Publication 30 series (ICRP, 1979a,b, 1980a, 1981, 1988) and Publication 68 (ICRP, 1994b). In addition, new data are now available that support an update of the radionuclide-specific information given in Publications 54 and 78 (ICRP, 1989a, 1997) for the design of monitoring programmes and retrospective assessment of occupational internal doses. Provision of new biokinetic models, dose coefficients, monitoring methods, and bioassay data was performed by Committee 2 and its task groups. A new series, the Occupational Intakes of Radionuclides (OIR) series, will replace the Publication 30 series and Publications 54, 68, and 78. OIR Part 1 (ICRP, 2015) describes the assessment of internal occupational exposure to radionuclides, biokinetic and dosimetric models, methods of individual and workplace monitoring, and general aspects of retrospective dose assessment. OIR Part 2 (ICRP, 2016), OIR Part 3 (ICRP, 2017), this current publication, and the final publication in the OIR series (OIR Part 5) provide data on individual elements and their radioisotopes, including information on chemical forms encountered in the workplace; a list of principal radioisotopes and their physical half-lives and decay modes; the parameter values of the reference biokinetic models; and data on monitoring techniques for the radioisotopes most commonly encountered in workplaces. Reviews of data on inhalation, ingestion, and systemic biokinetics are also provided for most of the elements. Dosimetric data provided in the printed publications of the OIR series include tables of committed effective dose per intake (Sv per Bq intake) for inhalation and ingestion, tables of committed effective dose per content (Sv per Bq measurement) for inhalation, and graphs of retention and excretion data per Bq intake for inhalation. These data are provided for all absorption types and for the most common isotope(s) of each element. The online electronic files that accompany the OIR series of publications contains a comprehensive set of committed effective and equivalent dose coefficients, committed effective dose per content functions, and reference bioassay functions. Data are provided for inhalation, ingestion, and direct input to blood. This fourth publication in the OIR series provides the above data for the following elements: lanthanum (La), cerium (Ce), praseodymium (Pr), neodymium (Nd), promethium (Pm), samarium (Sm), europium (Eu), gadolinium (Gd), terbium (Tb), dysprosium (Dy), holmium (Ho), erbium (Er), thulium (Tm), ytterbium (Yb), lutetium (Lu), actinium (Ac), protactinium (Pa), neptunium (Np), plutonium (Pu), americium (Am), curium (Cm), berkelium (Bk), californium (Cf), einsteinium (Es), and fermium (Fm).

The mayak worker dosimetry system (mwds-2013): an introduction to the documentation.

Abstract: The reconstruction of radiation doses to Mayak Production Association workers in central Russia supports radiation epidemiological studies for the U.S.-Russian Joint Coordinating Committee on Radiation Effects Research. The most recent version of the dosimetry was performed with the Mayak Worker Dosimetry System-2013. This introduction outlines the logic and general content of the series of articles presented in this issue of Radiation Protection Dosimetry. The articles summarize the models, describe the basis for most of the key decisions made in developing the models and present an overview of the results.

Retrospective dosimetry techniques for external ionising radiation exposures

Abstract: The current focus on networking and mutual assistance in the management of radiation accidents or incidents has demonstrated the importance of a joined-up approach in physical and biological dosimetry. To this end, the European Radiation Dosimetry Working Group 10 on 'Retrospective Dosimetry' has been set up by individuals from a wide range of disciplines across Europe. Here, established and emerging dosimetry methods are reviewed, which can be used immediately and retrospectively following external ionising radiation exposure. Endpoints and assays include dicentrics, translocations, premature chromosome condensation, micronuclei, somatic mutations, gene expression, electron paramagnetic resonance, thermoluminescence, optically stimulated luminescence, neutron activation, haematology, protein biomarkers and analytical dose reconstruction. Individual characteristics of these techniques, their limitations and potential for further development are reviewed, and their usefulness in specific exposure scenarios is discussed. Whilst no single technique fulfils the criteria of an ideal dosemeter, an integrated approach using multiple techniques tailored to the exposure scenario can cover most requirements.