Dennis W. Readey

Bio: Dennis W. Readey is an academic researcher from Colorado School of Mines. The author has contributed to research in topics: Thin film & Pulsed laser deposition. The author has an hindex of 17, co-authored 38 publications receiving 1042 citations. Previous affiliations of Dennis W. Readey include CoorsTek & National Renewable Energy Laboratory.

The Remarkable Thermal Stability of Amorphous In-Zn-O Transparent Conductors†

Abstract: Transparent conducting oxides (TCOs) are increasingly critical components in photovoltaic cells, low-e windows, flat panel displays, electrochromic devices, and flexible electronics. The conventional TCOs, such as Sn-doped In{sub 2}O{sub 3}, are crystalline single phase materials. Here, we report on In-Zn-O (IZO), a compositionally tunable amorphous TCO with some significantly improved properties. Compositionally graded thin film samples were deposited by co-sputtering from separate In{sub 2}O{sub 3} and ZnO targets onto glass substrates at 100 C. For the metals composition range of 55-84 cation% indium, the as-deposited IZO thin films are amorphous, smooth (R{sub RMS} 90%). Furthermore, the amorphous IZO thin films demonstrate remarkable functional and structural stability with respect to heating up to 600 C in either air or argon. Hence, though not completely understood at present, these amorphous materials constitute a new class of fundamentally interesting and technologically important high performance transparent conductors.

High-mobility transparent conducting Mo-doped In2O3 thin films by pulsed laser deposition

Abstract: Highly conductive and transparent Mo-doped indium oxide (IMO) thin films were grown on glass and (100) yttria-stabilized zirconia (YSZ) single-crystal substrates by pulsed laser deposition. The electrical, optical, and structural properties were measured for films grown from 0, 1, 2, and 4 wt % Mo-doped targets. Films grown from the 2 wt % Mo-doped target had the best overall properties. In particular, for biaxially textured 2 wt % Mo IMO films grown on (100) YSZ, the conductivity was ∼3000 S cm−1 with a mobility greater than 95 cm2 V−1 s−1. In the visible, the optical transmittance normalized to the substrate was greater than 90%.

Proton Conductivity Measurements in Yttrium Barium Cerate by Impedance Spectroscopy

Abstract: Proton-conducting solid-electrolyte perovskite ceramics based on acceptor-doped barium and strontium cerates have become the focus of extensive investigations as candidate materials for fuel cells that operate at moderate temperatures. To assess the suitability of a material for this application, it is necessary that bulk electrolyte conductivity be measured at the operating temperature. However, very little reliable published conductivity data exist above 600°C. Protonic conductivity in yttrium-doped barium cerate has been observed to be less at high temperatures than would be expected, based on the activation energy and preexponential for hydrogen transport at temperatures <300°C. Conductivity data obtained from impedance spectroscopy on BaCe 0.9 Y 0.1 O 3-α over the extended temperature range of 100°-900°C are presented. An Arrhenius plot of the data shows two distinct linear regions, suggesting that two different rate-limiting processes occur in series with a break-over transition at ∼250°C. The decrease in conductivity is apparently not due to dehydration. An activation energy for protonic transport of 0.26 eV, about one-half of the low-temperature value, is proposed, based on curve fitting of the high-temperature data.

Past achievements and future challenges in the development of optically transparent electrodes

Abstract: Increasing demand for raw materials means that alternatives to indium-tin oxide are desired for optically transparent electrode applications. Carbon nanotube, metal nanowire networks and regular metal grids have been investigated as possible options. In this review, these materials and recently rediscovered graphene are compared with the usual transparent conductive oxides.

High mobility transparent thin-film transistors with amorphous zinc tin oxide channel layer

Abstract: Transparent thin-film transistors (TTFTs) with an amorphous zinc tin oxide channel layer formed via rf magnetron sputter deposition are demonstrated. Field-effect mobilities of 5–15 and 20–50cm2V−1s−1 are obtained for devices post-deposition annealed at 300 and 600°C, respectively. TTFTs processed at 300 and 600°C yield devices with turn-on voltage of 0–15 and −5–5V, respectively. Under both processing conditions, a drain current on-to-off ratio greater than 107 is obtained. Zinc tin oxide is one example of a new class of high performance TTFT channel materials involving amorphous oxides composed of heavy-metal cations with (n−1)d10ns0 (n⩾4) electronic configurations.

Solid heterogeneous catalysts for transesterification of triglycerides with methanol: A review

Abstract: Increasing number of researches focusing on the use of solid heterogeneous catalysts for the production of biodiesel provides evidence that these catalysts continue to evolve as viable alternatives. While liquid alkaline metal alkoxides remain to be appealing in the industries, it is expected that solid base catalyst will soon become more attractive due to the economics and environmental concern. Limited researches have shown that the conversion by solid base catalysts was comparable to that of the existing alkoxide system. This paper reviews various types of heterogeneous solid acids and bases in the production of biodiesel from transesterification of triglycerides. Unconventional enzymatic and non-catalytic supercritical methanol transesterification are also presented. The yields and conversion from various catalytic systems are compared, and the advantages and disadvantages of the systems discussed.