scispace - formally typeset
Search or ask a question
Author

Dominique Larcher

Bio: Dominique Larcher is an academic researcher from Centre national de la recherche scientifique. The author has contributed to research in topics: Lithium & Aqueous solution. The author has an hindex of 38, co-authored 72 publications receiving 12236 citations. Previous affiliations of Dominique Larcher include Saft Groupe S.A. & Indian Institute of Science.


Papers
More filters
Journal ArticleDOI
TL;DR: The notion of sustainability is introduced through discussion of the energy and environmental costs of state-of-the-art lithium-ion batteries, considering elemental abundance, toxicity, synthetic methods and scalability.
Abstract: Energy storage using batteries offers a solution to the intermittent nature of energy production from renewable sources; however, such technology must be sustainable. This Review discusses battery development from a sustainability perspective, considering the energy and environmental costs of state-of-the-art Li-ion batteries and the design of new systems beyond Li-ion. Images: batteries, car, globe: © iStock/Thinkstock.

5,271 citations

Journal ArticleDOI
TL;DR: This Progress Report highlights the recent developments and the future prospects of the use of phases that react through conversion reactions as both positive and negative electrode materials in Li-ion batteries.
Abstract: Despite the imminent commercial introduction of Li-ion batteries in electric drive vehicles and their proposed use as enablers of smart grids based on renewable energy technologies, an intensive quest for new electrode materials that bring about improvements in energy density, cycle life, cost, and safety is still underway. This Progress Report highlights the recent developments and the future prospects of the use of phases that react through conversion reactions as both positive and negative electrode materials in Li-ion batteries. By moving beyond classical intercalation reactions, a variety of low cost compounds with gravimetric specific capacities that are two-to-five times larger than those attained with currently used materials, such as graphite and LiCoO(2), can be achieved. Nonetheless, several factors currently handicap the applicability of electrode materials entailing conversion reactions. These factors, together with the scientific breakthroughs that are necessary to fully assess the practicality of this concept, are reviewed in this report.

2,108 citations

Journal ArticleDOI
TL;DR: A review of recent advances in the use of Sn or Si-based electrodes together with the remaining challenges to be addressed and issues to be solved prior to such electrodes being commercially implemented in Li-ion cells is presented in this paper.
Abstract: In the race for better Li-ion batteries, research on anode materials is very intensive as there is a strong desire to find alternatives to carbonaceous negative electrodes. A large part of these studies is devoted to alloying reactions, which have been known for more than thirty years but that have regained great interest by downsizing particle sizes, moving to nano-textured/nanostructured composites, or designing new electrode concepts. It is not the scope of this review to retrace twenty-five years of research, but rather to highlight recent advances that have been made in the use of Sn or Si-based electrodes together with the remaining challenges to be addressed and issues to be solved prior to such electrodes being commercially implemented in Li-ion cells.

689 citations

Journal ArticleDOI
TL;DR: In this article, the electrochemical reaction of lithium with crystallized -Fe2O3 (hematite) has been studied by means of in situ X-ray diffraction, and it is shown that a careful control of the texture/particle size of electrochemically active oxide particles is likely an important variable that has been largely disregarded for such properties.
Abstract: The electrochemical reaction of lithium with crystallized -Fe2O3 (hematite) has been studied by means of in situ X-ray diffraction. When reacting large particles (~0.5 µm), we observed the well-known transformation of the close-packed anionic array from hexagonal (hc) to cubic (ccp) stacking. At the early stage of the reduction, a very small amount of lithium (xc<0.1 Li/Fe2O3) can be inserted before this structural transformation occurs. Nanosize -Fe2O3 made of fine monolithic particles (200 A) behaves very different, since up to one Li per formula unit (-Li1Fe2O3,xc = 1) can be inserted in the corundum structure without phase transformation. To our knowledge, this is the first time this phase is maintained for such large xc values. This cationic insertion was found to come with a small cell volume expansion evaluated to 1%. Unsuccessful attempts to increase the xc values on large particles by decreasing the applied discharge current density suggest that the particle size is the only parameter involved. The better structural reversibility of this monophasic process compared to the biphasic one was confirmed by electrochemical cycling tests conducted with hematite samples of various particle sizes. Therefore, by using nanosize particles, we can drastically increase the critical Li concentration required to observe the hcccp transition. This work demonstrates that a careful control of the texture/particle size of electrochemically active oxide particles is likely an important variable that has been largely disregarded for such properties. ©2002 The Electrochemical Society. All rights reserved.

580 citations

Journal ArticleDOI
TL;DR: In this paper, a self-healing process of the Si−CMC hydrogen bonding which can accommodate textural stresses and can evolve during cycling is proposed to be critical for Si-based electrode performances.
Abstract: Various Si/carbon/polymer composite electrodes were prepared to better understand the influence of the Si−polymer interactions on the stability of the Li−Si reaction and especially the superior performances of CMC-based (carboxy−methyl−cellulose) composites despite the large volume changes of the Si particles upon cycling. Via the modification of the composites formulation, the nature of the polymer, the nature and the amount of the substituting groups and the surface chemistry of the Si particles, together with the use of various characterization techniques (TEM, SEM, NMR−MAS, infrared spectroscopy, TGA, etc.) we could propose that the performances of the Si/Csp/CMC composite electrodes are nested in both the porous texture of the electrode and in the nature of the Si−polymer chemical bonding. A self-healing process of the rather strong Si−CMC hydrogen bonding which can accommodate textural stresses and can evolve during cycling is proposed to be critical for Si-based electrode performances. This better ...

455 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: This review describes some recent developments in the discovery of nanoelectrolytes and nanoeLECTrodes for lithium batteries, fuel cells and supercapacitors and the advantages and disadvantages of the nanoscale in materials design for such devices.
Abstract: New materials hold the key to fundamental advances in energy conversion and storage, both of which are vital in order to meet the challenge of global warming and the finite nature of fossil fuels. Nanomaterials in particular offer unique properties or combinations of properties as electrodes and electrolytes in a range of energy devices. This review describes some recent developments in the discovery of nanoelectrolytes and nanoelectrodes for lithium batteries, fuel cells and supercapacitors. The advantages and disadvantages of the nanoscale in materials design for such devices are highlighted.

8,157 citations

Journal ArticleDOI
TL;DR: The energy that can be stored in Li-air and Li-S cells is compared with Li-ion; the operation of the cells is discussed, as are the significant hurdles that will have to be overcome if such batteries are to succeed.
Abstract: Li-ion batteries have transformed portable electronics and will play a key role in the electrification of transport. However, the highest energy storage possible for Li-ion batteries is insufficient for the long-term needs of society, for example, extended-range electric vehicles. To go beyond the horizon of Li-ion batteries is a formidable challenge; there are few options. Here we consider two: Li-air (O(2)) and Li-S. The energy that can be stored in Li-air (based on aqueous or non-aqueous electrolytes) and Li-S cells is compared with Li-ion; the operation of the cells is discussed, as are the significant hurdles that will have to be overcome if such batteries are to succeed. Fundamental scientific advances in understanding the reactions occurring in the cells as well as new materials are key to overcoming these obstacles. The potential benefits of Li-air and Li-S justify the continued research effort that will be needed.

7,895 citations

Journal ArticleDOI
TL;DR: Practical Interests of Magnetic NuclearRelaxation for the Characterization of Superparamagnetic Colloid, and Use of Nanoparticles as Contrast Agents forMRI20825.
Abstract: 1. Introduction 20642. Synthesis of Magnetic Nanoparticles 20662.1. Classical Synthesis by Coprecipitation 20662.2. Reactions in Constrained Environments 20682.3. Hydrothermal and High-TemperatureReactions20692.4. Sol-Gel Reactions 20702.5. Polyol Methods 20712.6. Flow Injection Syntheses 20712.7. Electrochemical Methods 20712.8. Aerosol/Vapor Methods 20712.9. Sonolysis 20723. Stabilization of Magnetic Particles 20723.1. Monomeric Stabilizers 20723.1.1. Carboxylates 20733.1.2. Phosphates 20733.2. Inorganic Materials 20733.2.1. Silica 20733.2.2. Gold 20743.3. Polymer Stabilizers 20743.3.1. Dextran 20743.3.2. Polyethylene Glycol (PEG) 20753.3.3. Polyvinyl Alcohol (PVA) 20753.3.4. Alginate 20753.3.5. Chitosan 20753.3.6. Other Polymers 20753.4. Other Strategies for Stabilization 20764. Methods of Vectorization of the Particles 20765. Structural and Physicochemical Characterization 20785.1. Size, Polydispersity, Shape, and SurfaceCharacterization20795.2. Structure of Ferro- or FerrimagneticNanoparticles20805.2.1. Ferro- and Ferrimagnetic Nanoparticles 20805.3. Use of Nanoparticles as Contrast Agents forMRI20825.3.1. High Anisotropy Model 20845.3.2. Small Crystal and Low Anisotropy EnergyLimit20855.3.3. Practical Interests of Magnetic NuclearRelaxation for the Characterization ofSuperparamagnetic Colloid20855.3.4. Relaxation of Agglomerated Systems 20856. Applications 20866.1. MRI: Cellular Labeling, Molecular Imaging(Inflammation, Apoptose, etc.)20866.2.

5,915 citations

Journal ArticleDOI
TL;DR: The phytochemical properties of Lithium Hexafluoroarsenate and its Derivatives are as follows: 2.2.1.
Abstract: 2.1. Solvents 4307 2.1.1. Propylene Carbonate (PC) 4308 2.1.2. Ethers 4308 2.1.3. Ethylene Carbonate (EC) 4309 2.1.4. Linear Dialkyl Carbonates 4310 2.2. Lithium Salts 4310 2.2.1. Lithium Perchlorate (LiClO4) 4311 2.2.2. Lithium Hexafluoroarsenate (LiAsF6) 4312 2.2.3. Lithium Tetrafluoroborate (LiBF4) 4312 2.2.4. Lithium Trifluoromethanesulfonate (LiTf) 4312 2.2.5. Lithium Bis(trifluoromethanesulfonyl)imide (LiIm) and Its Derivatives 4313

5,710 citations

Journal ArticleDOI
TL;DR: This paper will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior.
Abstract: In the previous paper Ralph Brodd and Martin Winter described the different kinds of batteries and fuel cells. In this paper I will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior. The lithium battery industry is undergoing rapid expansion, now representing the largest segment of the portable battery industry and dominating the computer, cell phone, and camera power source industry. However, the present secondary batteries use expensive components, which are not in sufficient supply to allow the industry to grow at the same rate in the next decade. Moreover, the safety of the system is questionable for the large-scale batteries needed for hybrid electric vehicles (HEV). Another battery need is for a high-power system that can be used for power tools, where only the environmentally hazardous Ni/ Cd battery presently meets the requirements. A battery is a transducer that converts chemical energy into electrical energy and vice versa. It contains an anode, a cathode, and an electrolyte. The anode, in the case of a lithium battery, is the source of lithium ions. The cathode is the sink for the lithium ions and is chosen to optimize a number of parameters, discussed below. The electrolyte provides for the separation of ionic transport and electronic transport, and in a perfect battery the lithium ion transport number will be unity in the electrolyte. The cell potential is determined by the difference between the chemical potential of the lithium in the anode and cathode, ∆G ) -EF. As noted above, the lithium ions flow through the electrolyte whereas the electrons generated from the reaction, Li ) Li+ + e-, go through the external circuit to do work. Thus, the electrode system must allow for the flow of both lithium ions and electrons. That is, it must be both a good ionic conductor and an electronic conductor. As discussed below, many electrochemically active materials are not good electronic conductors, so it is necessary to add an electronically conductive material such as carbon * To whom correspondence should be addressed. Phone and fax: (607) 777-4623. E-mail: stanwhit@binghamton.edu. 4271 Chem. Rev. 2004, 104, 4271−4301

5,475 citations