E.J. Friebele

Bio: E.J. Friebele is an academic researcher from United States Naval Research Laboratory. The author has contributed to research in topics: Optical fiber & Fiber Bragg grating. The author has an hindex of 17, co-authored 25 publications receiving 4812 citations.

Fiber grating sensors

Abstract: We review the recent developments in the area of optical fiber grating sensors, including quasi-distributed strain sensing using Bragg gratings, systems based on chirped gratings, intragrating sensing concepts, long period-based grating sensors, fiber grating laser-based systems, and interferometric sensor systems based on grating reflectors.

Optical fiber waveguides in radiation environments, II

Abstract: This paper will review recent progress in understanding the behavior of optical fiber waveguides when they are exposed to ionizing radiation. Not only have the growth and recovery of the radiation-induced attenuations been thoroughly characterized, in some cases the defect centers which cause these absorptions have been identified, and means for reducing the radiation sensitivity of the fibers have become apparent. The behavior of the radiation-induced loss is described in terms of parameters such as fiber composition and dopants, fiber structure, wavelength and intensity of the light source, temperature, total dose, time after irradiation, dose rate, and radiation history.

Fiber bragg reflectors prepared by a single excimer pulse

Abstract: Narrow-line, permanent Bragg reflection gratings have been created in Ge-doped silica-core optical fibers by interfering beams of a single 20-ns pulse of KrF excimer laser light. Of the fibers studied, the highest reflectance value of ~2% was observed with a linewidth (FWHM) of 0.1 nm, which corresponds to a 2-mm grating length with an index modulation of ~3 x 10(-5).

In-line fiber etalon (ILFE) fiber-optic strain sensors

Abstract: This paper describes an optical fiber interferometer that uses a short segment of silica hollow-core fiber spliced between two sections of single-mode fiber to form a mechanically robust in-line optical cavity. The hollow-core fiber is specifically manufactured to have an outer diameter that is equal to the outer diameter of the single mode lead fibers, thereby combining the best qualities of existing intrinsic and extrinsic Fabry-Perot sensors. Uniaxial tension and pure bending strength tests are used to show that the new configuration does not diminish the axial strength of bare fiber and reduces the bending strength by 17% at most. Similar tests confirm that the fiber sensor has 1.96% strain to failure. Axisymmetric finite element analysis is used to investigate the reliability of the in-line etalon when it is embedded in a typical thermoset composite, and parametric studies are performed to determine the mechanically optimal cavity length. The fiber optic sensor is tested using low coherence interferometry with pseudo-heterodyne demodulation under strain and temperature fields. The strain response compares well with resistance strain gages, and the temperature tests confirm the low thermal apparent strain of this sensor. >

Shape and vibration mode sensing using a fiber optic Bragg grating array

Abstract: This paper discusses the use of wavelength division multiplexed fibre Bragg gratings for structural shape sensing and vibrational mode analysis. The gratings are surface attached to a cantilever beam and demodulated by a scanning fibre Fabry - Perot filter to obtain strain information at different locations along the structure. Two demodulation schemes are used, namely a single-sensor locked mode interrogation technique which permits vibrational analysis and a scanning multi-sensor approach for beam shape determination. Static beam deformation prediction is performed using a Rayleigh - Ritz type analysis with three optimized trial functions and the strain information obtained from the fibre Bragg grating sensors. The strain information is read into a PC which performs the shape modelling of the beam.

Optical fibre long-period grating sensors: characteristics and application

Abstract: Recent research on fibre optic long-period gratings (LPGs) is reviewed with emphasis placed upon the characteristics of LPGs that make them attractive for applications in sensing strain, temperature, bend radius and external index of refraction. The prospect of the development of multi-parameter sensors, capable of simultaneously monitoring a number of these measurands will be discussed.

In-fibre Bragg grating sensors

Abstract: In-fibre Bragg grating (FBG) sensors are one of the most exciting developments in the field of optical fibre sensors in recent years. Compared with conventional fibre-optic sensors, FBG sensors have a number of distinguishing advantages. Significant progress has been made in applications to strain and temperature measurements. FBG sensors prove to be one of the most promising candidates for fibre-optic smart structures. This article presents a comprehensive and systematic overview of FBG sensor technology regarding many aspects including sensing principles, properties, fabrication, interrogation and multiplexing of FBG sensors. It is anticipated that FBG sensor systems will be commercialized and widely applied in practice in the near future due to the maturity of economical production of FBGs and the availability of cost effective interrogation and multiplexing techniques.

Fiber Bragg gratings

Abstract: Since the discovery of photosensitivity in optical fibers there has been great interest in the fabrication of Bragg gratings within the core of a fiber. The ability to inscribe intracore Bragg gratings in these photosensitive fibers has revolutionized the field of telecommunications and optical fiber based sensor technology. Over the last few years, the number of researchers investigating fundamental, as well as application aspects of these gratings has increased dramatically. This article reviews the technology of Bragg gratings in optical fibers. It introduces the phenomenon of photosensitivity in optical fibers, examines the properties of Bragg gratings, and presents some of the important developments in devices and applications. The most common fabrication techniques (interferometric, phase mask, and point by point) are examined in detail with reference to the advantages and the disadvantages in utilizing them for inscribing Bragg gratings. Reflectivity, bandwidth, temperature, and strain sensitivity of the Bragg reflectors are examined and novel and special Bragg grating structures such as chirped gratings, blazed gratings, phase-shifted gratings, and superimposed multiple gratings are discussed. A formalism for calculating the spectral response of Bragg grating structures is described. Finally, devices and applications for telecommunication and fiber-optic sensors are described, and the impact of this technology on the future of the above areas is discussed.