E. Villanueva

Bio: E. Villanueva is an academic researcher from Valparaiso University. The author has contributed to research in topics: Topology (electrical circuits) & Grid-connected photovoltaic power system. The author has an hindex of 2, co-authored 2 publications receiving 670 citations.

Control of a Single-Phase Cascaded H-Bridge Multilevel Inverter for Grid-Connected Photovoltaic Systems

Abstract: This paper presents a single-phase cascaded H-bridge converter for a grid-connected photovoltaic (PV) application The multilevel topology consists of several H-bridge cells connected in series, each one connected to a string of PV modules The adopted control scheme permits the independent control of each dc-link voltage, enabling, in this way, the tracking of the maximum power point for each string of PV panels Additionally, low-ripple sinusoidal-current waveforms are generated with almost unity power factor The topology offers other advantages such as the operation at lower switching frequency or lower current ripple compared to standard two-level topologies Simulation and experimental results are presented for different operating conditions

Control of a single phase H-Bridge multilevel inverter for grid-connected PV applications

Abstract: This paper proposes a control scheme for a single phase H-bridge multilevel converter for photovoltaic applications. This control approach permits each H-bridge module supply different power levels, allowing an independent maximum power point tracking of each photovoltaic (PV) panel. Since no intermediate stages such boost DC-DC converters are needed, a high efficient solution is obtained compared to the standard PV converter systems. Additionally, this topology offers other advantages such as the operation at lower switching frequency and low current ripple. Simulation results of a two series connected H-bridge rectifier with maximum power point tracking for different conditions are presented.

Recent Advances and Industrial Applications of Multilevel Converters

Abstract: Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.

Medium-Voltage Multilevel Converters—State of the Art, Challenges, and Requirements in Industrial Applications

Abstract: This paper gives an overview of medium-voltage (MV) multilevel converters with a focus on achieving minimum harmonic distortion and high efficiency at low switching frequency operation. Increasing the power rating by minimizing switching frequency while still maintaining reasonable power quality is an important requirement and a persistent challenge for the industry. Existing solutions are discussed and analyzed based on their topologies, limitations, and control techniques. As a preferred option for future research and application, an inverter configuration based on three-level building blocks to generate five-level voltage waveforms is suggested. This paper shows that such an inverter may be operated at a very low switching frequency to achieve minimum on-state and dynamic device losses for highly efficient MV drive applications while maintaining low harmonic distortion.

Multilevel Converters: An Enabling Technology for High-Power Applications

Abstract: Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.

Multidimensional Modulation Technique for Cascaded Multilevel Converters

Abstract: Multilevel cascaded H-bridge converters have found industrial application in the medium-voltage high-power range. In this paper, a generalized modulation technique for this type of converter based on a multidimensional control region is presented. Using the multidimensional control region, it is shown that all previous modulation techniques are particularized versions of the proposed method. Several possible solutions to develop a specific implementation of the modulation method are addressed in order to show the potential possibilities and the flexibility of the proposed technique. In addition, a feedforward version of this technique is also introduced to determine the switching sequence and the switching times, avoiding low harmonic distortion with unbalanced dc voltages. Experimental results are shown in order to validate the proposed concepts.

Multilevel Converters: An Enabling Technology for High-Power Applications Multilevel converters generate voltage and current waveforms of improved quality, that can be used to power drives for trains and other vehicles, and many other applications.

Abstract: Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorialonthistechnology,coveringtheoperatingprincipleand the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.