Earl G. Hammond

Bio: Earl G. Hammond is an academic researcher from Iowa State University. The author has contributed to research in topics: Soybean oil & Flavor. The author has an hindex of 39, co-authored 192 publications receiving 5421 citations.

Use of branched-chain esters to reduce the crystallization temperature of biodiesel.

Abstract: To reduce the tendency of biodiesel to crystallize at low temperatures, branched-chain alcohols were used to esterify various fats and oils, and the crystallization properties of the branched esters were compared with those of methyl esters by using differential scanning calorimetry (DSC), cloud point, and pour point. Compared with the methyl esters that are commonly used in biodiesel, branched-chain esters greatly reduced the crystallization onset temperature (TCO) of neat esters and their corresponding ester diesel fuel blends. Isopropyl and 2-butyl esters of normal (∼10 wt% palmitate) soybean oil (SBO) crystallized 7–11 and 12–14°C lower, respectively, than the corresponding methyl esters. The benefit of the branched-chain esters in lowering TCO increased when the esters were blended with diesel fuel. Esters made from a low-palmitate (3.8%) SBO crystallized 5–6°C lower than those of normal SBO. Isopropyl esters of lard and tallow had TCO values similar to that of methyl esters of SBO. DSC provided an accurate means of monitoring crystallization, and the DSC results correlated with cloud and pour point measurements.

Analysis of oleate, linoleate and linolenate hydroperoxides in oxidized ester mixtures

Abstract: The hydroperoxides in oxidized mixtures of methyl oleate, linoleate and linolenate were analyzed by reducing the hydroperoxides to the corresponding hydroxyesters and separating the hydroxyesters from the unoxidized esters by thin layer chromatography (TLC). The hydroxyesters from linolenate were separated from the other hydroxyesters by TLC on silver ion plates. The hydroxyesters were converted to TMS-hydroxy derivatives. The TMS-hydroxyoleate and TMS-hydroxylinoleate were separated by gas chromatography (GC), and all the TMS-derivatives were quantified by GC. The relative rates of oxidation of methyl oleate, linoleate and linolenate in mixtures were ca. 1∶10.3∶21.6. The hydroperoxides formed in the oxidation of soybean and olive oils were similar before and after randomization and similar to corresponding methyl ester mixtures.

Fuel Properties and Emissions of Soybean Oil Esters as Diesel Fuel

Abstract: The effects of using blends of methyl and isopropyl esters of soybean oil with No. 2 diesel fuel were studied at several steady-state operating conditions in a four-cylinder turbocharged diesel engine. Fuel blends that contained 20, 50, and 70% methyl soyate and 20 and 50% isopropyl soyate were tested. Fuel properties, such as cetane number, also were investigated. Both methyl and isopropyl esters provided significant reductions in particulate emissions compared with No. 2 diesel fuel. A blend of 50% methyl ester and 50% No. 2 diesel fuel provided a reduction of 37% in the carbon portion of the particulates and 25% in the total particulates. The 50% blend of isopropyl ester and 50% No. 2 diesel fuel gave a 55% reduction in carbon and a 28% reduction in total particulate emissions. Emissions of carbon monoxide and unburned hydrocarbons also were reduced significantly. Oxides of nitrogen increased by 12%.

Physical and sensory properties of dairy products from cows with various milk fatty acid compositions.

Abstract: Dairy products from milk of cows fed diets rich in polyunsaturated fatty acids have a more health-promoting fatty acid composition and are softer but often have oxidized flavors. Dairy products made from cow's milk that has more- or less-unsaturated fatty acid compositions were tested for differences in texture and flavor from those made from bulk-tank milk. The milk was manufactured into butter, vanilla ice cream, yogurt, Provolone cheese, and Cheddar cheese. The products were analyzed for fatty acid composition, physical properties, and flavor. Milk of cows with a more monounsaturated fatty acid composition yielded products with a more monounsaturated fatty acid composition that were softer and had a satisfactory flavor. Thus, selection of cows for milk fatty acid composition can be used to produce dairy products that are probably more healthful and have a softer texture.

Triglycerides-based diesel fuels

Abstract: Efforts are under way in many countries, including India, to search for suitable alternative diesel fuels that are environment friendly. The need to search for these fuels arises mainly from the standpoint of preserving the global environment and the concern about long-term supplies of conventional hydrocarbon-based diesel fuels. Among the different possible sources, diesel fuels derived from triglycerides (vegetable oils/animal fats) present a promising alternative to substitute diesel fuels. Although triglycerides can fuel diesel engines, their high viscosities, low volatilities and poor cold flow properties have led to the investigation of various derivatives. Fatty acid methyl esters, known as biodiesel, derived from triglycerides by transesterification with methanol have received the most attention. The main advantages of using biodiesel are its renewability, better-quality exhaust gas emissions, its biodegradability and given that all the organic carbon present is photosynthetic in origin, it does not contribute to a rise in the level of carbon dioxide in the atmosphere and consequently to the greenhouse effect.

Review of biodiesel composition, properties, and specifications

Abstract: Biodiesel is a renewable transportation fuel consisting of fatty acid methyl esters (FAME), generally produced by transesterification of vegetable oils and animal fats. In this review, the fatty acid (FA) profiles of 12 common biodiesel feedstocks were summarized. Considerable compositional variability exists across the range of feedstocks. For example, coconut, palm and tallow contain high amounts of saturated FA; while corn, rapeseed, safflower, soy, and sunflower are dominated by unsaturated FA. Much less information is available regarding the FA profiles of algal lipids that could serve as biodiesel feedstocks. However, some algal species contain considerably higher levels of poly-unsaturated FA than is typically found in vegetable oils. Differences in chemical and physical properties among biodiesel fuels can be explained largely by the fuels’ FA profiles. Two features that are especially influential are the size distribution and the degree of unsaturation within the FA structures. For the 12 biodiesel types reviewed here, it was shown that several fuel properties – including viscosity, specific gravity, cetane number, iodine value, and low temperature performance metrics – are highly correlated with the average unsaturation of the FAME profiles. Due to opposing effects of certain FAME structural features, it is not possible to define a single composition that is optimum with respect to all important fuel properties. However, to ensure satisfactory in-use performance with respect to low temperature operability and oxidative stability, biodiesel should contain relatively low concentrations of both long-chain saturated FAME and poly-unsaturated FAME.