Edmund Taglauer

Bio: Edmund Taglauer is an academic researcher from Max Planck Society. The author has contributed to research in topics: Ion & Scattering. The author has an hindex of 35, co-authored 152 publications receiving 4161 citations.

Data Compendium for Plasma-Surface Interactions

Abstract: A review of particle-solid processes pertinent to modelling plasma-wall interactions is presented, and sets of recommended data are given. Analytic formulas are used where possible; otherwise, data are presented in the form of tables and graphs. The incident particles considered are e−, H, D, T, He, C, O, and selfions. The materials include the metals aluminum, beryllium, copper, molybdenum, stainless steel, titanium, and tungsten and the nonmetals carbon and TiC. The processes covered are light ion reflection, hydrogen and helium trapping and detrapping, desorption, evaporation, sputtering, chemical effects in sputtering, blistering caused by implantation of helium and hydrogen, secondary electron emission by electrons and particles, and arcing.

Chapter 4: Power and particle control

Abstract: Progress, since the ITER Physics Basis publication (ITER Physics Basis Editors et al 1999 Nucl. Fusion 39 2137–2664), in understanding the processes that will determine the properties of the plasma edge and its interaction with material elements in ITER is described. Experimental areas where significant progress has taken place are energy transport in the scrape-off layer (SOL) in particular of the anomalous transport scaling, particle transport in the SOL that plays a major role in the interaction of diverted plasmas with the main-chamber material elements, edge localized mode (ELM) energy deposition on material elements and the transport mechanism for the ELM energy from the main plasma to the plasma facing components, the physics of plasma detachment and neutral dynamics including the edge density profile structure and the control of plasma particle content and He removal, the erosion of low- and high-Z materials in fusion devices, their transport to the core plasma and their migration at the plasma edge including the formation of mixed materials, the processes determining the size and location of the retention of tritium in fusion devices and methods to remove it and the processes determining the efficiency of the various fuelling methods as well as their development towards the ITER requirements. This experimental progress has been accompanied by the development of modelling tools for the physical processes at the edge plasma and plasma–materials interaction and the further validation of these models by comparing their predictions with the new experimental results. Progress in the modelling development and validation has been mostly concentrated in the following areas: refinement in the predictions for ITER with plasma edge modelling codes by inclusion of detailed geometrical features of the divertor and the introduction of physical effects, which can play a major role in determining the divertor parameters at the divertor for ITER conditions such as hydrogen radiation transport and neutral–neutral collisions, modelling of the ion orbits at the plasma edge, which can play a role in determining power deposition at the divertor target, models for plasma–materials and plasma dynamics interaction during ELMs and disruptions, models for the transport of impurities at the plasma edge to describe the core contamination by impurities and the migration of eroded materials at the edge plasma and its associated tritium retention and models for the turbulent processes that determine the anomalous transport of energy and particles across the SOL. The implications for the expected performance of the reference regimes in ITER, the operation of the ITER device and the lifetime of the plasma facing materials are discussed.

Effect of surface composition on electronic structure, stability, and electrocatalytic properties of Pt-transition metal alloys: Pt-skin versus Pt-skeleton surfaces.

Abstract: The surface properties of PtM (M = Co, Ni, Fe) polycrystalline alloys are studied by utilizing Auger electron spectroscopy, low energy ion scattering spectroscopy, and ultraviolet photoemission spectroscopy. For each alloy initial surface characterization was done in an ultrahigh vacuum (UHV) system, and depending on preparation procedure it was possible to form surfaces with two different compositions. Due to surface segregation thermodynamics, annealed alloy surfaces form the outermost Pt-skin surface layer, which consists only platinum atoms, while the sputtered surfaces have the bulk ratio of alloying components. The measured valence band density of state spectra clearly shows the differences in electronic structures between Pt-skin and sputtered surfaces. Well-defined surfaces were hereafter transferred out from UHV and exposed to the acidic (electro)chemical environment. The electrochemical and post-electrochemical UHV surface characterizations revealed that Pt-skin surfaces are stable during and af...

Surface Composition Effects in Electrocatalysis: Kinetics of Oxygen Reduction on Well-Defined Pt3Ni and Pt3Co Alloy Surfaces

Abstract: The oxygen reduction reaction (ORR) has been studied on polycrystalline Pt3Ni and Pt3Co alloys in acid electrolytes using the rotating ring disk electrode (RRDE) method. Preparation and characterization of alloy surfaces were performed in ultrahigh vacuum (UHV). Clearly defined surface composition was determined via low-energy ion-scattering (LEIS) spectroscopy. Polycrystalline bulk alloys of Pt3Ni and Pt3Co were prepared in UHV having two different surface compositions: one with 75% Pt and the other with 100% Pt. The latter we call a “Pt-skin” structure and is produced by an exchange of Pt and Co in the first two layers. The base voltammetry in 0.1 M HClO4 solution of the 75% Pt alloy surface indicated a decrease of Hupd pseudocapacitance (ca. 30−40 μC/cm2) consistent with the surface composition determined in UHV. With the exception of the “Pt-skin” surface on Pt3Ni, all the alloy electrodes exhibited stable i−E curves with repeated cycling between 0.05 and 1.0 V at all temperatures. Activities of Pt-a...

Sputtering Studies with the Monte Carlo Program TRIM.SP

Abstract: The Monte Carlo Program TRIM.SP (sputtering version of TRIM) was used to determine sputtering yields and energy and angular distributions of sputtered particles in physical (collisional) sputtering processes. The output is set up to distinguish between the contributions of primary and secondary knock-on atoms as caused by in- and outgoing incident ions, in order to get a better understanding of the sputtering mechanisms and to check on previous theoretical models. The influence of the interatomic potential and the inelastic energy loss model as well as the surface binding energy on the sputtering yield is investigated. Further results are sputtering yields versus incident energy and angle as well as total angular distributions of sputtered particles and energy distributions in specific solid angles for non-normal incidence. The calculated data are compared with experimental results as far as possible. From this comparison it turns out that the TRIM.SP is able to reproduce experimental results even in very special details of angular and energy distributions.