Edward K. N. Yung

Bio: Edward K. N. Yung is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Antenna (radio) & Microstrip antenna. The author has an hindex of 29, co-authored 308 publications receiving 3643 citations. Previous affiliations of Edward K. N. Yung include Nanjing University of Science and Technology & Nanyang Technological University.

Energy-Efficient Base-Stations Sleep-Mode Techniques in Green Cellular Networks: A Survey

Abstract: Due to global climate change as well as economic concern of network operators, energy consumption of the infrastructure of cellular networks, or “Green Cellular Networking,” has become a popular research topic. While energy saving can be achieved by adopting renewable energy resources or improving design of certain hardware (e.g., power amplifier) to make it more energy-efficient, the cost of purchasing, replacing, and installing new equipment (including manpower, transportation, disruption to normal operation, as well as associated energy and direct cost) is often prohibitive. By comparison, approaches that work on the operating protocols of the system do not require changes to current network architecture, making them far less costly and easier for testing and implementation. In this survey, we first present facts and figures that highlight the importance of green mobile networking and then review existing green cellular networking research with particular focus on techniques that incorporate the concept of the “sleep mode” in base stations. It takes advantage of changing traffic patterns on daily or weekly basis and selectively switches some lightly loaded base stations to low energy consumption modes. As base stations are responsible for the large amount of energy consumed in cellular networks, these approaches have the potential to save a significant amount of energy, as shown in various studies. However, it is noticed that certain simplifying assumptions made in the published papers introduce inaccuracies. This review will discuss these assumptions, particularly, an assumption that ignores the effect of traffic-load-dependent factors on energy consumption. We show here that considering this effect may lead to noticeably lower benefit than in models that ignore this effect. Finally, potential future research directions are discussed.

Dual-Band Dual-Sense Circularly-Polarized CPW-Fed Slot Antenna With Two Spiral Slots Loaded

Abstract: A novel design of a dual-band dual-sense circularly-polarized CPW-fed slot antenna with two spiral slots loaded is presented. The two loaded spiral slots in the ground plane can result in different senses of circular polarization. The dual-band operation is achieved by using the T-shape strip. The ratio of two frequencies is 1.375. The antenna is designed, fabricated, and measured. It is shown that the proposed antenna has good circular polarization characteristic. The measured 10 dB return loss impedance bandwidths are 8.7% for the lower band (RHCP) and 23% for the upper band (LHCP). The measured 3 dB axial-ratio bandwidths are 8.4% and 19.24%, with respect to 1.6 GHz (RHCP) and 2.2 GHz (LHCP), respectively.

Circular-polarised dielectric resonator antenna excited by dual conformal strips

Abstract: A circular-polarised cylindrical dielectric resonator antenna excited by dual conformal strips is investigated experimentally. The configuration offers a wide axial-ratio bandwidth of 20%. We measured axial ratio, radiation patterns and antenna gain of the configuration are presented and discussed.

Dual-Band Circularly-Polarized CPW-Fed Slot Antenna With a Small Frequency Ratio and Wide Bandwidths

Abstract: A novel dual-band circularly-polarized (CP) CPW-fed slot antenna is proposed in this communication. This antenna characterizes a small frequency ratio and wide CP bandwidths. The dual-band operations are realized by using two parallel monopoles, one curved monopole and one fork-shaped monopole. In addition, a crane-shaped strip is placed in the ground plane to achieve circular polarization. The experimental results show that the antenna has the axial ratio bandwidths of 9% for the lower band and 11% for the upper band. Both bands are left handed. The frequency ratio of the upper band to the lower band is 1.286 (1.98 GHz/1.54 GHz). Other characteristics such as impedance bandwidths, radiation patterns and gains will also be presented.

Application of the SSOR preconditioned CG algorithm to the vector FEM for 3D full-wave analysis of electromagnetic-field boundary-value problems

Abstract: The symmetric successive overrelaxation (SSOR) preconditioning scheme is applied to the conjugate-gradient (CG) method for solving a large system of linear equations resulting from the use of edge-based finite-element method (FEM). For this scheme, there is no additional computing time required to construct the preconditioning matrix and it contains more global information of the coefficient matrix when compared with those of the banded-matrix preconditioning scheme. The efficient implementation of this preconditioned CG (PCG) algorithm is described in details for complex coefficient matrix. With SSOR as the preconditioner and its efficient implementation in the CG algorithm, this PCG approach can reach convergence in five times CPU time shorter than CG for several typical structures. By comparison with other preconditioned techniques, these results demonstrate that SSOR preconditioning strategy is especially effective for CG iterative method when an edge FEM is applied to solve large-scale time-harmonic electromagnetic-field problems.

Next Generation 5G Wireless Networks: A Comprehensive Survey

Abstract: The vision of next generation 5G wireless communications lies in providing very high data rates (typically of Gbps order), extremely low latency, manifold increase in base station capacity, and significant improvement in users’ perceived quality of service (QoS), compared to current 4G LTE networks. Ever increasing proliferation of smart devices, introduction of new emerging multimedia applications, together with an exponential rise in wireless data (multimedia) demand and usage is already creating a significant burden on existing cellular networks. 5G wireless systems, with improved data rates, capacity, latency, and QoS are expected to be the panacea of most of the current cellular networks’ problems. In this survey, we make an exhaustive review of wireless evolution toward 5G networks. We first discuss the new architectural changes associated with the radio access network (RAN) design, including air interfaces, smart antennas, cloud and heterogeneous RAN. Subsequently, we make an in-depth survey of underlying novel mm-wave physical layer technologies, encompassing new channel model estimation, directional antenna design, beamforming algorithms, and massive MIMO technologies. Next, the details of MAC layer protocols and multiplexing schemes needed to efficiently support this new physical layer are discussed. We also look into the killer applications, considered as the major driving force behind 5G. In order to understand the improved user experience, we provide highlights of new QoS, QoE, and SON features associated with the 5G evolution. For alleviating the increased network energy consumption and operating expenditure, we make a detail review on energy awareness and cost efficiency. As understanding the current status of 5G implementation is important for its eventual commercialization, we also discuss relevant field trials, drive tests, and simulation experiments. Finally, we point out major existing research issues and identify possible future research directions.

Massive MIMO Networks: Spectral, Energy, and Hardware Efficiency

Abstract: Massive multiple-input multiple-output MIMO is one of themost promising technologies for the next generation of wirelesscommunication networks because it has the potential to providegame-changing improvements in spectral efficiency SE and energyefficiency EE. This monograph summarizes many years ofresearch insights in a clear and self-contained way and providesthe reader with the necessary knowledge and mathematical toolsto carry out independent research in this area. Starting froma rigorous definition of Massive MIMO, the monograph coversthe important aspects of channel estimation, SE, EE, hardwareefficiency HE, and various practical deployment considerations.From the beginning, a very general, yet tractable, canonical systemmodel with spatial channel correlation is introduced. This modelis used to realistically assess the SE and EE, and is later extendedto also include the impact of hardware impairments. Owing tothis rigorous modeling approach, a lot of classic "wisdom" aboutMassive MIMO, based on too simplistic system models, is shownto be questionable.

Dielectric Resonator Antennas

Abstract: Linearly and circularly polarized conformal strip-fed dielectric resonator antennas (DRAs) are studied in this article. In the latter case, a parasitic patch is used to excite a nearly degenerate mode. The hemispherical DRA, excited in its fundamental broadside TE111 mode, is used for the demonstration. In the analysis, the mode-matching method is used to obtain the Green's functions, whereas the method of moments is used to solve for the unknown strip currents. In order to solve the singularity problem of the Green's functions, a recurrence technique is used to evaluate the impedance integrals. This greatly increases the numerical efficiency. Measurements were carried out to verify the calculations, with good results. Keywords: circularly polarized antenna; dielectric antennas; mode-matching methods; moment methods; parasitic antennas; resonance

Physics of negative refractive index materials

Abstract: In the past few years, new developments in structured electromagnetic materials have given rise to negative refractive index materials which have both negative dielectric permittivity and negative magnetic permeability in some frequency ranges. The idea of a negative refractive index opens up new conceptual frontiers in photonics. One much-debated example is the concept of a perfect lens that enables imaging with sub-wavelength image resolution. Here we review the fundamental concepts and ideas of negative refractive index materials. First we present the ideas of structured materials or meta-materials that enable the design of new materials with a negative dielectric permittivity, negative magnetic permeability and negative refractive index. We discuss how a variety of resonance phenomena can be utilized to obtain these materials in various frequency ranges over the electromagnetic spectrum. The choice of the wave-vector in negative refractive index materials and the issues of dispersion, causality and energy transport are analysed. Various issues of wave propagation including nonlinear effects and surface modes in negative refractive materials (NRMs) are discussed. In the latter part of the review, we discuss the concept of a perfect lens consisting of a slab of a NRM. This perfect lens can image the far-field radiative components as well as the nearfield evanescent components, and is not subject to the traditional diffraction limit. Different aspects of this lens such as the surface modes acting as the mechanism for the imaging of the evanescent waves, the limitations imposed by dissipation and dispersion in the negative refractive media, the generalization of this lens to optically complementary media and the possibility of magnification of the near-field images are discussed. Recent experimental developments verifying these ideas are briefly covered. (Some figures in this article are in colour only in the electronic version)

Finite-Element Method

Abstract: The finite-element method (FEM) is a full-wave numerical method that discretizes the variational of a functional. The evolution of this method within the scope of electromagnetics traces back to the solving of two classes of problems, namely, the eigenmode problems and the deterministic problems. If we try to use some examples to illustrate the most typical and the most complete techniques with the most complete solution, the eigenmode problem of a dielectrically loaded waveguide and the wave propagation in a three-dimensional (3D) discontinuous waveguide are good candidates representing the eigenmode and the closed-domain solutions, respectively. As for the open-domain scattering problem and radiating problems, the authors consider the essential and key parts are presented in solving the 3D scattering problems. For this reason, we will illustrate the theoretical basics, the critical solving techniques and the typical skills involved in FEM through solving of the above three specific problems. At the end of this chapter, we will also briefly review the FEM solution for some other problems.