Author
Edward T. Samulski
Other affiliations: Princeton University, University of Texas at Austin, University of Patras ...read more
Bio: Edward T. Samulski is an academic researcher from University of North Carolina at Chapel Hill. The author has contributed to research in topics: Liquid crystal & Deuterium NMR. The author has an hindex of 60, co-authored 336 publications receiving 18887 citations. Previous affiliations of Edward T. Samulski include Princeton University & University of Texas at Austin.
Papers published on a yearly basis
Papers
More filters
TL;DR: A facile and scalable preparation of aqueous solutions of isolated, sparingly sulfonated graphene is reported, and NMR and FTIR spectra indicate that the bulk of the oxygen-containing functional groups was removed from graphene oxide.
Abstract: A facile and scalable preparation of aqueous solutions of isolated, sparingly sulfonated graphene is reported. 13C NMR and FTIR spectra indicate that the bulk of the oxygen-containing functional groups was removed from graphene oxide. The electrical conductivity of thin evaporated films of graphene (1250 S/m) relative to similarly prepared graphite (6120 S/m) implies that an extended conjugated sp2 network is restored in the water soluble graphene.
2,577 citations
TL;DR: The continuous generation of monolithic polymeric parts up to tens of centimeters in size with feature resolution below 100 micrometers is demonstrated and critical control parameters are delineated and shown that complex solid parts can be drawn out of the resin at rates of hundreds of millimeters per hour.
Abstract: Additive manufacturing processes such as 3D printing use time-consuming, stepwise layer-by-layer approaches to object fabrication. We demonstrate the continuous generation of monolithic polymeric parts up to tens of centimeters in size with feature resolution below 100 micrometers. Continuous liquid interface production is achieved with an oxygen-permeable window below the ultraviolet image projection plane, which creates a "dead zone" (persistent liquid interface) where photopolymerization is inhibited between the window and the polymerizing part. We delineate critical control parameters and show that complex solid parts can be drawn out of the resin at rates of hundreds of millimeters per hour. These print speeds allow parts to be produced in minutes instead of hours.
1,787 citations
TL;DR: In this article, a metal nanoparticle-graphene composite with a partially exfoliated graphene morphology derived from drying aqueous dispersions of platinum nanoparticles adhered to graphene is presented.
Abstract: Aggregation of isolated graphene sheets during drying graphene dispersions leads to a loss of its ultrahigh surface area advantage as a two-dimensional nanomaterial. We report a metal nanoparticle-graphene composite with a partially exfoliated graphene morphology derived from drying aqueous dispersions of platinum nanoparticles adhered to graphene. Platinum nanoparticles with diameters spanning several nanometers are adhered to graphene by a chemical route involving the reduction of metal precursors in a graphene dispersion. Face-to-face aggregation of graphene sheets is arrested by 3−4 nm fcc Pt crystallites on the graphene surfaces, and in the resulting jammed Pt−graphene composite, the Pt acts as spacers resulting in mechanically exfoliated, high-surface-area material of potential interest for supercapacitors and fuel cells.
1,083 citations
TL;DR: Polarized microscopy and conoscopy indicate that liquid crystal mesogens based on a nonlinear oxadiazole unit that exhibit nematic phases near 200 degrees C are biaxial nematics, and unambiguous and quantitative evidence for biaXiality is achieved using 2H NMR spectroscopy.
Abstract: We have synthesized liquid crystal (LC) mesogens based on a nonlinear oxadiazole unit that exhibit nematic phases near $200\text{ }\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ Polarized microscopy and conoscopy indicate that these LCs are biaxial nematics Unambiguous and quantitative evidence for biaxiality is achieved using $^{2}\mathrm{H}$ NMR spectroscopy ``2D powder'' spectra, obtained by rotating $^{2}\mathrm{H}$-labeled samples about an axis perpendicular to the magnetic field at $\ensuremath{\sim}200\text{ }\text{ }\mathrm{Hz}$, yield phase biaxiality parameters of $\ensuremath{\sim}01$ when coupled with rigorous and proven simulations
534 citations
TL;DR: Small-diameter (<5 nm), single-crystalline SnO2 nanorods were synthesized in solution with a mean length of 17 +/- 4 nm (mean aspect ratio of 4:1) with the [001] direction along the major axis.
Abstract: Small-diameter (<5 nm), single-crystalline SnO2 nanorods were synthesized in solution with a mean length of 17 +/- 4 nm (mean aspect ratio of 4:1) with the [001] direction along the major axis. Two characteristic peaks at 576 and 356 cm-1 in the Raman spectrum further confirmed the small crystal size. The SnO2 nanorods exhibit a red emission at 580 nm.
507 citations
Cited by
More filters
28 Jul 2005
TL;DR: PfPMP1）与感染红细胞、树突状组胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作�ly.
Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。
18,940 citations
TL;DR: This review will be of value to synthetic chemists interested in this emerging field of materials science, as well as those investigating applications of graphene who would find a more thorough treatment of the chemistry of graphene oxide useful in understanding the scope and limitations of current approaches which utilize this material.
Abstract: The chemistry of graphene oxide is discussed in this critical review Particular emphasis is directed toward the synthesis of graphene oxide, as well as its structure Graphene oxide as a substrate for a variety of chemical transformations, including its reduction to graphene-like materials, is also discussed This review will be of value to synthetic chemists interested in this emerging field of materials science, as well as those investigating applications of graphene who would find a more thorough treatment of the chemistry of graphene oxide useful in understanding the scope and limitations of current approaches which utilize this material (91 references)
10,126 citations
TL;DR: An improved method for the preparation of graphene oxide (GO) is described, finding that excluding the NaNO(3), increasing the amount of KMnO(4), and performing the reaction in a 9:1 mixture of H(2)SO(4)/H(3)PO(4) improves the efficiency of the oxidation process.
Abstract: An improved method for the preparation of graphene oxide (GO) is described. Currently, Hummers’ method (KMnO4, NaNO3, H2SO4) is the most common method used for preparing graphene oxide. We have found that excluding the NaNO3, increasing the amount of KMnO4, and performing the reaction in a 9:1 mixture of H2SO4/H3PO4 improves the efficiency of the oxidation process. This improved method provides a greater amount of hydrophilic oxidized graphene material as compared to Hummers’ method or Hummers’ method with additional KMnO4. Moreover, even though the GO produced by our method is more oxidized than that prepared by Hummers’ method, when both are reduced in the same chamber with hydrazine, chemically converted graphene (CCG) produced from this new method is equivalent in its electrical conductivity. In contrast to Hummers’ method, the new method does not generate toxic gas and the temperature is easily controlled. This improved synthesis of GO may be important for large-scale production of GO as well as the ...
9,812 citations
TL;DR: An overview of the synthesis, properties, and applications of graphene and related materials (primarily, graphite oxide and its colloidal suspensions and materials made from them), from a materials science perspective.
Abstract: There is intense interest in graphene in fields such as physics, chemistry, and materials science, among others. Interest in graphene's exceptional physical properties, chemical tunability, and potential for applications has generated thousands of publications and an accelerating pace of research, making review of such research timely. Here is an overview of the synthesis, properties, and applications of graphene and related materials (primarily, graphite oxide and its colloidal suspensions and materials made from them), from a materials science perspective.
8,919 citations
TL;DR: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency as mentioned in this paper, and many DSC research groups have been established around the world.
Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...
8,707 citations