scispace - formally typeset
Search or ask a question
Author

Efrén Navarro-Moratalla

Bio: Efrén Navarro-Moratalla is an academic researcher from University of Valencia. The author has contributed to research in topics: Magnetism & Ferromagnetism. The author has an hindex of 22, co-authored 49 publications receiving 6313 citations. Previous affiliations of Efrén Navarro-Moratalla include Massachusetts Institute of Technology & University of Cambridge.


Papers
More filters
Journal ArticleDOI
07 Jun 2017-Nature
TL;DR: Xu et al. as mentioned in this paper used magneto-optical Kerr effect microscopy to show that monolayer chromium triiodide (CrI3) is an Ising ferromagnet with out-of-plane spin orientation.
Abstract: Magneto-optical Kerr effect microscopy is used to show that monolayer chromium triiodide is an Ising ferromagnet with out-of-plane spin orientation. The question of what happens to the properties of a material when it is thinned down to atomic-scale thickness has for a long time been a largely hypothetical one. In the past decade, new experimental methods have made it possible to isolate and measure a range of two-dimensional structures, enabling many theoretical predictions to be tested. But it has been a particular challenge to observe intrinsic magnetic effects, which could shed light on the longstanding fundamental question of whether intrinsic long-range magnetic order can robustly exist in two dimensions. In this issue of Nature, two groups address this challenge and report ferromagnetism in atomically thin crystals. Xiang Zhang and colleagues measured atomic layers of Cr2Ge2Te6 and observed ferromagnetic ordering with a transition temperature that, unusually, can be controlled using small magnetic fields. Xiaodong Xu and colleagues measured atomic layers of CrI3 and observed ferromagnetic ordering that, remarkably, was suppressed in double layers of CrI3, but restored in triple layers. The two studies demonstrate a platform with which to test fundamental properties of purely two-dimensional magnets. Since the discovery of graphene1, the family of two-dimensional materials has grown, displaying a broad range of electronic properties. Recent additions include semiconductors with spin–valley coupling2, Ising superconductors3,4,5 that can be tuned into a quantum metal6, possible Mott insulators with tunable charge-density waves7, and topological semimetals with edge transport8,9. However, no two-dimensional crystal with intrinsic magnetism has yet been discovered10,11,12,13,14; such a crystal would be useful in many technologies from sensing to data storage15. Theoretically, magnetic order is prohibited in the two-dimensional isotropic Heisenberg model at finite temperatures by the Mermin–Wagner theorem16. Magnetic anisotropy removes this restriction, however, and enables, for instance, the occurrence of two-dimensional Ising ferromagnetism. Here we use magneto-optical Kerr effect microscopy to demonstrate that monolayer chromium triiodide (CrI3) is an Ising ferromagnet with out-of-plane spin orientation. Its Curie temperature of 45 kelvin is only slightly lower than that of the bulk crystal, 61 kelvin, which is consistent with a weak interlayer coupling. Moreover, our studies suggest a layer-dependent magnetic phase, highlighting thickness-dependent physical properties typical of van der Waals crystals17,18,19. Remarkably, bilayer CrI3 displays suppressed magnetization with a metamagnetic effect20, whereas in trilayer CrI3 the interlayer ferromagnetism observed in the bulk crystal is restored. This work creates opportunities for studying magnetism by harnessing the unusual features of atomically thin materials, such as electrical control for realizing magnetoelectronics12, and van der Waals engineering to produce interface phenomena15.

3,802 citations

Journal ArticleDOI
TL;DR: Electrical control of magnetism in a bilayer of CrI3 enables the realization of an electrically driven magnetic phase transition and the observation of the magneto-optical Kerr effect in 2D magnets.
Abstract: Controlling magnetism via electric fields addresses fundamental questions of magnetic phenomena and phase transitions1–3, and enables the development of electrically coupled spintronic devices, such as voltage-controlled magnetic memories with low operation energy4–6. Previous studies on dilute magnetic semiconductors such as (Ga,Mn)As and (In,Mn)Sb have demonstrated large modulations of the Curie temperatures and coercive fields by altering the magnetic anisotropy and exchange interaction2,4,7–9. Owing to their unique magnetic properties10–14, the recently reported two-dimensional magnets provide a new system for studying these features15–19. For instance, a bilayer of chromium triiodide (CrI3) behaves as a layered antiferromagnet with a magnetic field-driven metamagnetic transition15,16. Here, we demonstrate electrostatic gate control of magnetism in CrI3 bilayers, probed by magneto-optical Kerr effect (MOKE) microscopy. At fixed magnetic fields near the metamagnetic transition, we realize voltage-controlled switching between antiferromagnetic and ferromagnetic states. At zero magnetic field, we demonstrate a time-reversal pair of layered antiferromagnetic states that exhibit spin-layer locking, leading to a linear dependence of their MOKE signals on gate voltage with opposite slopes. Our results allow for the exploration of new magnetoelectric phenomena and van der Waals spintronics based on 2D materials.

1,000 citations

Journal ArticleDOI
TL;DR: In this article, the authors demonstrate voltage-controlled switching between antiferromagnetic and ferromagnetic states in bilayer chromium triiodide (CrI3) bilayers.
Abstract: The challenge of controlling magnetism using electric fields raises fundamental questions and addresses technological needs such as low-dissipation magnetic memory. The recently reported two-dimensional (2D) magnets provide a new system for studying this problem owing to their unique magnetic properties. For instance, bilayer chromium triiodide (CrI3) behaves as a layered antiferromagnet with a magnetic field-driven metamagnetic transition. Here, we demonstrate electrostatic gate control of magnetism in CrI3 bilayers, probed by magneto-optical Kerr effect (MOKE) microscopy. At fixed magnetic fields near the metamagnetic transition, we realize voltage-controlled switching between antiferromagnetic and ferromagnetic states. At zero magnetic field, we demonstrate a time-reversal pair of layered antiferromagnetic states which exhibit spin-layer locking, leading to a remarkable linear dependence of their MOKE signals on gate voltage with opposite slopes. Our results pave the way for exploring new magnetoelectric phenomena and van der Waals spintronics based on 2D materials.

576 citations

Journal ArticleDOI
15 Jun 2018-Science
TL;DR: Tuning through the layered magnetic insulator CrI3 as a function of temperature and applied magnetic field is reported, electrically detect the magnetic ground state and interlayer coupling and observe a field-induced metamagnetic transition.
Abstract: Magnetic insulators are a key resource for next-generation spintronic and topological devices. The family of layered metal halides promises varied magnetic states, including ultrathin insulating multiferroics, spin liquids, and ferromagnets, but device-oriented characterization methods are needed to unlock their potential. Here, we report tunneling through the layered magnetic insulator CrI3 as a function of temperature and applied magnetic field. We electrically detect the magnetic ground state and interlayer coupling and observe a field-induced metamagnetic transition. The metamagnetic transition results in magnetoresistances of 95, 300, and 550% for bilayer, trilayer, and tetralayer CrI3 barriers, respectively. We further measure inelastic tunneling spectra for our junctions, unveiling a rich spectrum consistent with collective magnetic excitations (magnons) in CrI3.

514 citations

Journal ArticleDOI
TL;DR: The state-of-the-art of the deterministic placement methods are reviewed, describing and comparing the different alternative methods available in the literature, and their potential to fabricate van der Waals heterostructures, to integrate 2D materials into complex devices and to Fabricate artificial bilayer structures where the layers present a user-defined rotational twisting angle are illustrated.
Abstract: Designer heterostructures can now be assembled layer-by-layer with unmatched precision thanks to the recently developed deterministic placement methods to transfer two-dimensional (2D) materials. This possibility constitutes the birth of a very active research field on the so-called van der Waals heterostructures. Moreover, these deterministic placement methods also open the door to fabricate complex devices, which would be otherwise very difficult to achieve by conventional bottom-up nanofabrication approaches, and to fabricate fully-encapsulated devices with exquisite electronic properties. The integration of 2D materials with existing technologies such as photonic and superconducting waveguides and fiber optics is another exciting possibility. Here, we review the state-of-the-art of the deterministic placement methods, describing and comparing the different alternative methods available in the literature and we illustrate their potential to fabricate van der Waals heterostructures, to integrate 2D materials into complex devices and to fabricate artificial bilayer structures where the layers present a user-defined rotational twisting angle.

351 citations


Cited by
More filters
Journal ArticleDOI
07 Jun 2017-Nature
TL;DR: Xu et al. as mentioned in this paper used magneto-optical Kerr effect microscopy to show that monolayer chromium triiodide (CrI3) is an Ising ferromagnet with out-of-plane spin orientation.
Abstract: Magneto-optical Kerr effect microscopy is used to show that monolayer chromium triiodide is an Ising ferromagnet with out-of-plane spin orientation. The question of what happens to the properties of a material when it is thinned down to atomic-scale thickness has for a long time been a largely hypothetical one. In the past decade, new experimental methods have made it possible to isolate and measure a range of two-dimensional structures, enabling many theoretical predictions to be tested. But it has been a particular challenge to observe intrinsic magnetic effects, which could shed light on the longstanding fundamental question of whether intrinsic long-range magnetic order can robustly exist in two dimensions. In this issue of Nature, two groups address this challenge and report ferromagnetism in atomically thin crystals. Xiang Zhang and colleagues measured atomic layers of Cr2Ge2Te6 and observed ferromagnetic ordering with a transition temperature that, unusually, can be controlled using small magnetic fields. Xiaodong Xu and colleagues measured atomic layers of CrI3 and observed ferromagnetic ordering that, remarkably, was suppressed in double layers of CrI3, but restored in triple layers. The two studies demonstrate a platform with which to test fundamental properties of purely two-dimensional magnets. Since the discovery of graphene1, the family of two-dimensional materials has grown, displaying a broad range of electronic properties. Recent additions include semiconductors with spin–valley coupling2, Ising superconductors3,4,5 that can be tuned into a quantum metal6, possible Mott insulators with tunable charge-density waves7, and topological semimetals with edge transport8,9. However, no two-dimensional crystal with intrinsic magnetism has yet been discovered10,11,12,13,14; such a crystal would be useful in many technologies from sensing to data storage15. Theoretically, magnetic order is prohibited in the two-dimensional isotropic Heisenberg model at finite temperatures by the Mermin–Wagner theorem16. Magnetic anisotropy removes this restriction, however, and enables, for instance, the occurrence of two-dimensional Ising ferromagnetism. Here we use magneto-optical Kerr effect microscopy to demonstrate that monolayer chromium triiodide (CrI3) is an Ising ferromagnet with out-of-plane spin orientation. Its Curie temperature of 45 kelvin is only slightly lower than that of the bulk crystal, 61 kelvin, which is consistent with a weak interlayer coupling. Moreover, our studies suggest a layer-dependent magnetic phase, highlighting thickness-dependent physical properties typical of van der Waals crystals17,18,19. Remarkably, bilayer CrI3 displays suppressed magnetization with a metamagnetic effect20, whereas in trilayer CrI3 the interlayer ferromagnetism observed in the bulk crystal is restored. This work creates opportunities for studying magnetism by harnessing the unusual features of atomically thin materials, such as electrical control for realizing magnetoelectronics12, and van der Waals engineering to produce interface phenomena15.

3,802 citations

Journal ArticleDOI
TL;DR: In this article, the authors examined the methods used to synthesize transition metal dichalcogenides (TMDCs) and their properties with particular attention to their charge density wave, superconductive and topological phases, along with their applications in devices with enhanced mobility and with the use of strain engineering to improve their properties.
Abstract: Graphene is very popular because of its many fascinating properties, but its lack of an electronic bandgap has stimulated the search for 2D materials with semiconducting character. Transition metal dichalcogenides (TMDCs), which are semiconductors of the type MX2, where M is a transition metal atom (such as Mo or W) and X is a chalcogen atom (such as S, Se or Te), provide a promising alternative. Because of its robustness, MoS2 is the most studied material in this family. TMDCs exhibit a unique combination of atomic-scale thickness, direct bandgap, strong spin–orbit coupling and favourable electronic and mechanical properties, which make them interesting for fundamental studies and for applications in high-end electronics, spintronics, optoelectronics, energy harvesting, flexible electronics, DNA sequencing and personalized medicine. In this Review, the methods used to synthesize TMDCs are examined and their properties are discussed, with particular attention to their charge density wave, superconductive and topological phases. The use of TMCDs in nanoelectronic devices is also explored, along with strategies to improve charge carrier mobility, high frequency operation and the use of strain engineering to tailor their properties. Two-dimensional transition metal dichalcogenides (TMDCs) exhibit attractive electronic and mechanical properties. In this Review, the charge density wave, superconductive and topological phases of TMCDs are discussed, along with their synthesis and applications in devices with enhanced mobility and with the use of strain engineering to improve their properties.

3,436 citations

Journal ArticleDOI
TL;DR: Delamination of LDHs is an interesting route for producing positively charged thin platelets with a thickness of a few atomic layers, which can be used as nanocomposites for polymers or as building units for making new designed organic- inorganic or inorganic-inorganic nanomaterials.
Abstract: Layered double hydroxides (LDHs) are a class of ionic lamellar compounds made up of positively charged brucite-like layers with an interlayer region containing charge compensating anions and solvation molecules. Delamination of LDHs is an interesting route for producing positively charged thin platelets with a thickness of a few atomic layers, which can be used as nanocomposites for polymers or as building units for making new designed organic-inorganic or inorganic-inorganic nanomaterials. The synthesis of nanosized LDH platelets can be generally classified into two approaches, bottom-up and top-down. It requires modification of the LDH interlamellar environment and then selection of an appropriate solvent system. In DDS intercalated LDHs, the aliphatic tails of the DDS- anions exhibit a high degree of interdigitation in order to maximize guest-guest dispersive interactions. Bellezza reported that the LDH colloids can also been obtained by employing a reverse microemulsion approach.

2,616 citations

Journal ArticleDOI
TL;DR: The ambipolar behavior coupled to the fast and broadband photodetection make few-layer black phosphorus a promising 2D material for photodetsection across the visible and near-infrared part of the electromagnetic spectrum.
Abstract: Few-layer black phosphorus, a new elemental two-dimensional (2D) material recently isolated by mechanical exfoliation, is a high-mobility layered semiconductor with a direct bandgap that is predicted to strongly depend on the number of layers, from 0.35 eV (bulk) to 2.0 eV (single layer). Therefore, black phosphorus is an appealing candidate for tunable photodetection from the visible to the infrared part of the spectrum. We study the photoresponse of field-effect transistors (FETs) made of few-layer black phosphorus (3–8 nm thick), as a function of excitation wavelength, power, and frequency. In the dark state, the black phosphorus FETs can be tuned both in hole and electron doping regimes allowing for ambipolar operation. We measure mobilities in the order of 100 cm2/V s and a current ON/OFF ratio larger than 103. Upon illumination, the black phosphorus transistors show a response to excitation wavelengths from the visible region up to 940 nm and a rise time of about 1 ms, demonstrating broadband and fa...

1,489 citations

Journal ArticleDOI
22 Oct 2018-Nature
TL;DR: It is found that the itinerant ferromagnetism persists in Fe3GeTe2 down to the monolayer with an out-of-plane magnetocrystalline anisotropy, which opens up opportunities for potential voltage-controlled magnetoelectronics based on atomically thin van der Waals crystals.
Abstract: Materials research has driven the development of modern nano-electronic devices. In particular, research in magnetic thin films has revolutionized the development of spintronic devices1,2 because identifying new magnetic materials is key to better device performance and design. Van der Waals crystals retain their chemical stability and structural integrity down to the monolayer and, being atomically thin, are readily tuned by various kinds of gate modulation3,4. Recent experiments have demonstrated that it is possible to obtain two-dimensional ferromagnetic order in insulating Cr2Ge2Te6 (ref. 5) and CrI3 (ref. 6) at low temperatures. Here we develop a device fabrication technique and isolate monolayers from the layered metallic magnet Fe3GeTe2 to study magnetotransport. We find that the itinerant ferromagnetism persists in Fe3GeTe2 down to the monolayer with an out-of-plane magnetocrystalline anisotropy. The ferromagnetic transition temperature, Tc, is suppressed relative to the bulk Tc of 205 kelvin in pristine Fe3GeTe2 thin flakes. An ionic gate, however, raises Tc to room temperature, much higher than the bulk Tc. The gate-tunable room-temperature ferromagnetism in two-dimensional Fe3GeTe2 opens up opportunities for potential voltage-controlled magnetoelectronics7-11 based on atomically thin van der Waals crystals.

1,416 citations