Author
Efstathios E. Michaelides
Other affiliations: University of Delaware, Tulane University, University of North Texas ...read more
Bio: Efstathios E. Michaelides is an academic researcher from Texas Christian University. The author has contributed to research in topics: Reynolds number & Turbulence. The author has an hindex of 35, co-authored 160 publications receiving 5547 citations. Previous affiliations of Efstathios E. Michaelides include University of Delaware & Tulane University.
Topics: Reynolds number, Turbulence, Two-phase flow, Particle, Heat transfer
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, a new computational method, the immersed boundary-lattice Boltzmann method, is presented, which combines the most desirable features of the lattice Boltzman and immersed boundary methods and uses a regular Eulerian grid for the flow domain and a Lagrangian grid to follow particles contained in the flow field.
804 citations
TL;DR: Proteus as mentioned in this paper is a direct numerical method for the simulation of particulate flows that combines desired elements of the immersed boundary method, the direct forcing method and the lattice Boltzmann method.
424 citations
TL;DR: In this paper, a review of recent advances in the measurement and modeling of thermophysical properties at the nanoscale (from the solid state to colloids) is presented, including thermal conductivity, dynamic viscosity, specific heat capacity, and density.
322 citations
TL;DR: In this article, a new and accurate empirical correlation for the drag coefficient, C D, of variously shaped particles has been developed, based on the particle nominal diameter, Re, the ratio of the surface-equivalent-sphere to the nominal diameters, d A / d n, and the particle circularity, c.
295 citations
TL;DR: In this article, the development, form, and engineering applications of the transient equation of motion of rigid particles, bubbles, and droplets are presented, with particular emphasis on the semi-empirical forms of the equation, which are widely used in engineering practice.
Abstract: The development, form, and engineering applications of the transient equation of motion of rigid particles, bubbles, and droplets are presented. Some of the early work on the equation of motion, as well as recent advances, are exposed. Particular emphasis is placed on the semiempirical forms of the equation, which are widely used in engineering practice. The creeping flow assumption, on which most of the known applications are based, is critically examined and its limitations are pointed out. Recent results on particle flow, which include the effect of the advection of a downstream wake and are applicable to finite (but small) Reynolds numbers are also presented. The form of the history (Basset) term is discussed, in the light of recent work and its effect on the integrated results of the equation of motion is examined. Recommendations are given on the appearance, importance, and significance of the history and added mass terms for those who may use the semiempirical form of the transient equation of spheres in a differential or integrated form.
227 citations
Cited by
More filters
Book•
01 Oct 2013TL;DR: In this paper, the fundamental physical processes involved in bubble dynamics and the phenomenon of cavitation are described and explained, and a review of the free streamline methods used to treat separated cavity flows with large attached cavities is provided.
Abstract: This book describes and explains the fundamental physical processes involved in bubble dynamics and the phenomenon of cavitation. It is intended as a combination of a reference book for those scientists and engineers who work with cavitation or bubble dynamics and as a monograph for advanced students interested in some of the basic problems associated with this category of multiphase flows. A basic knowledge of fluid flow and heat transfer is assumed but otherwise the analytical methods presented are developed from basic principles.
The book begins with a chapter on nucleation and describes both the theory and observations of nucleation in flowing and non-flowing systems. The following three chapters provide a systematic treatment of the dynamics of the growth, collapse or oscillation of individual bubbles in otherwise quiescent liquids. Chapter 4 summarizes the state of knowledge of the motion of bubbles in liquids. Chapter 5 describes some of the phenomena which occur in homogeneous bubbly flows with particular emphasis on cloud cavitation and this is followed by a chapter summarizing some of the experiemntal observations of cavitating flows. The last chapter provides a review of the free streamline methods used to treat separated cavity flows with large attached cavities.
2,994 citations
Journal Article•
TL;DR: In this paper, the authors presented a method to detect the presence of a tumor in the human brain using EPFL-206025 data set, which was created on 2015-03-03, modified on 2017-05-12
Abstract: Note: Times Cited: 875 Reference EPFL-ARTICLE-206025doi:10.1021/cr0501846View record in Web of Science URL: ://WOS:000249839900009 Record created on 2015-03-03, modified on 2017-05-12
1,704 citations
01 Nov 1999
TL;DR: This report is a self-contained guide to application of Tough2 to subsurface flow problems, and gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used.
Abstract: TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data.
1,597 citations
TL;DR: This work reviews many significant developments over the past decade of the lattice-Boltzmann method and discusses higherorder boundary conditions and the simulation of microchannel flow with finite Knudsen number.
Abstract: With its roots in kinetic theory and the cellular automaton concept, the lattice-Boltzmann (LB) equation can be used to obtain continuum flow quantities from simple and local update rules based on particle interactions. The simplicity of formulation and its versatility explain the rapid expansion of the LB method to applications in complex and multiscale flows. We review many significant developments over the past decade with specific examples. Some of the most active developments include the entropic LB method and the application of the LB method to turbulent flow, multiphase flow, and deformable particle and fiber suspensions. Hybrid methods based on the combination of the Eulerian lattice with a Lagrangian grid system for the simulation of moving deformable boundaries show promise for more efficient applications to a broader class of problems. We also discuss higherorder boundary conditions and the simulation of microchannel flow with finite Knudsen number. Additionally, the remarkable scalability of the LB method for parallel processing is shown with examples. Teraflop simulations with the LB method are routine, and there is no doubt that this method will be one of the first candidates for petaflop computational fluid dynamics in the near future.
1,585 citations
TL;DR: In this article, an improved method for computing incompressible viscous flow around suspended rigid particles using a fixed and uniform computational grid is presented. But the main idea is to incorporate Peskin's regularized delta function approach into a direct formulation of the fluid-solid interaction force in order to allow for a smooth transfer between Eulerian and Lagrangian representations.
1,399 citations