scispace - formally typeset
Search or ask a question
Author

Elizabeth Cottrell

Bio: Elizabeth Cottrell is an academic researcher from National Museum of Natural History. The author has contributed to research in topics: Mantle (geology) & Mineral redox buffer. The author has an hindex of 33, co-authored 81 publications receiving 3683 citations. Previous affiliations of Elizabeth Cottrell include Columbia University & Carnegie Institution for Science.


Papers
More filters
Journal ArticleDOI
31 Jul 2009-Science
TL;DR: Integrated measurements of redox-sensitive ratios of oxidized iron to total iron (Fe3+/ΣFe) determined with Fe K-edge micro–x-ray absorption near-edge structure spectroscopy and pre-eruptive magmatic H2O contents of a global sampling of primitive undegassed basaltic glasses and melt inclusions indicate a direct link between mass transfer from the subducted plate and oxidation of the mantle wedge.
Abstract: Mantle oxygen fugacity exerts a primary control on mass exchange between Earth’s surface and interior at subduction zones, but the major factors controlling mantle oxygen fugacity (such as volatiles and phase assemblages) and how tectonic cycles drive its secular evolution are still debated. We present integrated measurements of redox-sensitive ratios of oxidized iron to total iron (Fe 3+ /ΣFe), determined with Fe K-edge micro–x-ray absorption near-edge structure spectroscopy, and pre-eruptive magmatic H 2 O contents of a global sampling of primitive undegassed basaltic glasses and melt inclusions covering a range of plate tectonic settings. Magmatic Fe 3+ /ΣFe ratios increase toward subduction zones (at ridges, 0.13 to 0.17; at back arcs, 0.15 to 0.19; and at arcs, 0.18 to 0.32) and correlate linearly with H 2 O content and element tracers of slab-derived fluids. These observations indicate a direct link between mass transfer from the subducted plate and oxidation of the mantle wedge.

658 citations

Journal ArticleDOI
TL;DR: In this paper, the authors show that global MORBs yield average Fe{sup 3+}/{Sigma}Fe ratios of 0.16 {+-} 0.01 (n = 103), which trace back to primary MORB melts equilibrated at the conditions of the QFM buffer.

383 citations

Journal ArticleDOI
TL;DR: In this article, the authors measured olivine-hosted melt inclusions from a single eruption of Agrigan volcano, Marianas, in order to test the influence of differentiation processes vs. source conditions on the Fe{sup 3+}/{Sigma}Fe ratio, a proxy for system oxygen fugacity.

225 citations

Journal ArticleDOI
TL;DR: In this paper, major, volatile, and trace element concentrations in combination with Fe^(3+)/∑Fe ratios determined in olivine-hosted glass inclusions and submarine glasses from five Mariana arc volcanoes and two regions of the Mariana Trough.
Abstract: Arc basalts are more oxidized than mid-ocean ridge basalts, but it is unclear whether this difference is due to differentiation processes in the Earth’s crust or to a fundamental difference in the oxygen fugacity of their mantle sources. Distinguishing between these two hypotheses is important for understanding redox-sensitive processes related to arc magmatism, and thus more broadly how Earth materials cycle globally. We present major, volatile, and trace element concentrations in combination with Fe^(3+)/∑Fe ratios determined in olivine-hosted glass inclusions and submarine glasses from five Mariana arc volcanoes and two regions of the Mariana Trough. For single eruptions, Fe^(3+)/∑Fe ratios vary along liquid lines of descent that are either slightly oxidizing (olivine + clinopyroxene + plagioclase fractionation, CO_2 ± H_2O degassing) or reducing (olivine + clinopyroxene + plagioclase ± magnetite fractionation, CO_2 + H_2O + S degassing). Mariana samples are consistent with a global relationship between calc-alkaline affinity and both magmatic H_2O and magmatic oxygen fugacity, where wetter, higher oxygen fugacity magmas display greater affinity for calc-alkaline differentiation. We find, however, that low-pressure differentiation cannot explain the majority of variations observed in Fe^(3+)/∑Fe ratios for Mariana arc basalts, requiring primary differences in magmatic oxygen fugacity. Calculated oxygen fugacities of primary mantle melts at the pressures and temperatures of melt segregation are significantly oxidized relative to mid-ocean ridge basalts (∼QFM, where QFM is quartz–fayalite–magnetite buffer), ranging from QFM + 1·0 to QFM + 1·6 for Mariana arc basalts, whereas back-arc related samples record primary oxygen fugacities that range from QFM + 0·1 to QFM + 0·5. This Mariana arc sample suite includes a diversity of subduction influences, from lesser influence of a homogeneous H_2O-rich component in the back-arc, to sediment melt- and fluid-dominated influences along the arc. Primary melt oxygen fugacity does not correlate significantly with sediment melt contributions (e.g. Th/La), nor can it be attributed to previous melt extraction in the back-arc. Primary melt oxygen fugacity correlates strongly with indices of slab fluids (e.g. Ba/La) from the Mariana Trough through the Mariana arc, increasing by 1·5 orders of magnitude as Ba/La increases by a factor of 10 relative to mid-ocean ridge basalts. These results suggest that contributions from the slab to the mantle wedge may be responsible for the elevated oxygen fugacity recorded by Mariana arc basalts and that slab fluids are potentially very oxidized.

193 citations

Journal ArticleDOI
TL;DR: In this article, a second-order polynomial model was proposed for the correlation between the centroid and Fe3+/∑Fe, yielding a precision of ± 0.0045.

185 citations


Cited by
More filters
01 Feb 2016

1,970 citations

Journal ArticleDOI
TL;DR: In this article, a model for the generation of intermediate and silicic igneous rocks is presented, based on experimental data and numerical modeling, which is directed at subduction-related magmatism, but has general applicability to magmas generated in other plate tectonic settings, including continental rift zones.
Abstract: A model for the generation of intermediate and silicic igneous rocks is presented, based on experimental data and numerical modelling. The model is directed at subduction-related magmatism, but has general applicability to magmas generated in other plate tectonic settings, including continental rift zones. In the model mantlederived hydrous basalts emplaced as a succession of sills into the lower crust generate a deep crustal hot zone. Numerical modelling of the hot zone shows that melts are generated from two distinct sources; partial crystallization of basalt sills to produce residual H2O-rich melts; and partial melting of pre-existing crustal rocks. Incubation times between the injection of the first sill and generation of residual melts from basalt crystallization are controlled by the initial geotherm, the magma input rate and the emplacement depth. After this incubation period, the melt fraction and composition of residual melts are controlled by the temperature of the crust into which the basalt is intruded. Heat and H2O transfer from the crystallizing basalt promote partial melting of the surrounding crust, which can include meta-sedimentary and meta-igneous basement rocks and earlier basalt intrusions. Mixing of residual and crustal partial melts leads to diversity in isotope and trace element chemistry. Hot zone melts are H2O-rich. Consequently, they have low viscosity and density, and can readily detach from their source and ascend rapidly. In the case of adiabatic ascent the magma attains a super-liquidus state, because of the relative slopes of the adiabat and the liquidus. This leads to resorption of any entrained crystals or country rock xenoliths. Crystallization begins only when the ascending magma intersects its H2O-saturated liquidus at shallow depths. Decompression and degassing are the driving forces behind crystallization, which takes place at shallow depth on timescales of decades or less. Degassing and crystallization at shallow depth lead to large increases in viscosity and stalling of the magma to form volcano-feeding magma chambers and shallow plutons. It is proposed that chemical diversity in arc magmas is largely acquired in the lower crust, whereas textural diversity is related to shallow-level crystallization.

1,547 citations

MonographDOI
09 Jan 2020
TL;DR: The third edition of the reference book as discussed by the authors has been thoroughly updated while retaining its comprehensive coverage of the fundamental theory, concepts, and laboratory results, and highlights applications in unconventional reservoirs, including water, hydrocarbons, gases, minerals, rocks, ice, magma and methane hydrates.
Abstract: Responding to the latest developments in rock physics research, this popular reference book has been thoroughly updated while retaining its comprehensive coverage of the fundamental theory, concepts, and laboratory results. It brings together the vast literature from the field to address the relationships between geophysical observations and the underlying physical properties of Earth materials - including water, hydrocarbons, gases, minerals, rocks, ice, magma and methane hydrates. This third edition includes expanded coverage of topics such as effective medium models, viscoelasticity, attenuation, anisotropy, electrical-elastic cross relations, and highlights applications in unconventional reservoirs. Appendices have been enhanced with new materials and properties, while worked examples (supplemented by online datasets and MATLAB® codes) enable readers to implement the workflows and models in practice. This significantly revised edition will continue to be the go-to reference for students and researchers interested in rock physics, near-surface geophysics, seismology, and professionals in the oil and gas industries.

1,387 citations

Journal ArticleDOI
TL;DR: In this article, the authors examined the source of normal arc magmas and concluded that they are predominantly derived from partial melting of the metasomatized mantle wedge, with possible minor contributions from subducted sediments.

572 citations

Journal ArticleDOI
TL;DR: In this paper, a one-dimensional thermal conduction model was proposed to simulate the repetitive intrusion of basalt sills into the deeper parts of the crust, and the model assumes geothermal gradients of 10−30°C km−1, and intrusion depths at 20 and 30 km.

518 citations