Elizabeth F. Tilden

Bio: Elizabeth F. Tilden is an academic researcher from Bell Labs. The author has contributed to research in topics: Aircraft maintenance & Downtime. The author has an hindex of 1, co-authored 1 publications receiving 420 citations.

Anisotropy and Magnetostriction of Some Ferrites

Abstract: Magnetic crystal anisotropy and magnetostriction have been measured in various single crystals of ferrites having compositions represented approximately by $M{\mathrm{Fe}}_{2}{\mathrm{O}}_{4}$, where $M$ stands for Mn, Fe, Co, Ni, and Zn in various proportions. Special attention is given to heat-treatment in a magnetic field.The magnetic anisotropy of cobalt ferrite at room temperature is as high as 4\ifmmode\times\else\texttimes\fi{}${10}^{6}$ ergs/${\mathrm{cm}}^{2}$. Magnetostriction is as high as 800\ifmmode\times\else\texttimes\fi{}${10}^{\ensuremath{-}6}$. Magnetic anneal is effective at temperatures as low as 150\ifmmode^\circ\else\textdegree\fi{}C, and causes the hysteresis loop to become square. In polycrystalline material the response to magnetic anneal is a maximum at compositions intermediate between Co${\mathrm{Fe}}_{2}$${\mathrm{O}}_{4}$ and ${\mathrm{Fe}}_{3}$${\mathrm{O}}_{4}$.The constants for the various specimens are tabulated. Values of the anisotropy constants of Mn${\mathrm{Fe}}_{2}$${\mathrm{O}}_{4}$ at 20\ifmmode^\circ\else\textdegree\fi{}C and -196\ifmmode^\circ\else\textdegree\fi{}C are the same as those determined from ferromagnetic resonance experiments. At -196\ifmmode^\circ\else\textdegree\fi{}C the constant for ${\mathrm{Ni}}_{0.75}$${\mathrm{Fe}}_{2.25}$${\mathrm{O}}_{4}$ differs markedly from that determined by ferromagnetic resonance; this is to be expected from the relaxation phenomena observed by Galt, Yager, and Merritt.

The Connected Hangar: Ubiquitous Computing and Aircraft Maintenance

Abstract: In the aviation space, predictive maintenance (PMx) is a strong driver in the push for Internet of Things (IoT) device management systems, artificial intelligence (AI)/machine learning (ML) research, and cloud infrastructure. The potential for this approach to reduce downtime, maximize component lifetime, reduce man-hours on diagnosis and repair, and optimize supply chains and scheduling has driven massive investments across the industry. And yet, the challenges in delivering on these promises with the available data and technology should also not be minimized. To reach its full potential, PMx implementers must understand what predictions can be derived from the available data, what maintenance actions may be driven by those predictions, and how the predictions should be presented to the appropriate decision makers in ground operations and the logistics chain. In this paper, we will examine the current state of data within the aviation PMx space, variations in component level coverage, and how that translates to the type, volume, and timeliness of data and computational infrastructure necessary to provide right time predictions and analytics to maintainers, supply chain managers, and operators. We will also examine the specific challenges for PMx in the aviation space with respect to data availability, equipment variability, use variability, and maintenance action coding that can affect the ability of operators to derive value from a PMx program.

A Thin Film Approach to Engineering Functionality into Oxides

Abstract: The broad spectrum of electronic and optical properties exhibited by oxides offers tremendous opportunities for microelectronic devices, especially when a combination of properties in a single device is desired Here we describe the use of reactive molecular-beam epitaxy and pulsed-laser deposition to synthesize functional oxides, including ferroelectrics, ferromagnets, and materials that are both at the same time Owing to the dependence of properties on direction, it is often optimal to grow functional oxides in particular directions to maximize their properties for a specific application But these thin film techniques offer more than orientation control; customization of the film structure down to the atomic-layer level is possible Numerous examples of the controlled epitaxial growth of oxides with perovskite and perovskite-related structures, including superlattices and metastable phases, are shown In addition to integrating functional oxides with conventional semiconductors, standard semiconductor practices involving epitaxial strain, confined thickness, and modulation doping can also be applied to oxide thin films Results of fundamental scientific importance as well as results revealing the tremendous potential of utilizing functional oxide thin films to create devices with enhanced performance are described

An in situ grown eutectic magnetoelectric composite material

Abstract: A eutectic composite material with the mixed spinel cobalt ferrite-cobalt titanate and the perovskite barium titanate as co-existing phases has been prepared, which shows a magnetoelectric effect due to the mechanical coupling of the piezomagnetic spinel and the piezoelectric perovskite. The maximum value of the magnetoelectric effect ΔE/ΔH obtained up till now is 5.0 × 10−2 V cm−1 Oe−1 at room temperature.

Chapter 7 Magnetostrictive rare earth-Fe2 compounds

Abstract: Publisher Summary This chapter provides an overview of the magnetoelastic properties of the highly magnetostrictive rare earth-Fe2 alloys. The chapter describes a general treatment of magnetostriction for the cases of hexagonal and cubic symmetry, which is applicable to the rare earth elements and the rare earth-iron compounds. The chapter presents the magnetostriction of binary rare earth-iron alloys and the magnetostriction of single crystal and polycrystal RFe2 compounds are compared to other magnetostrictive materials at room temperature. The chapter discusses a possible source of startling magnetostriction anisotropy, measurements of magnetization, sublattice magnetization, and magnetic anisotropy, and the role of intrinsic as well as extrinsic effects. It reports the effects of the strong magnetoelastic coupling on sound velocities and elastic moduli and observes extraordinarily large ∆E effects and changes in sound velocity in single crystals, polycrystals, and amorphous rare earth-Fe2 alloys. The chapter concludes with a discussion of the recent measurements of linear and volume magnetostriction on the amorphous form of the RFe2 alloys.

Unusually high coercivity and critical single-domain size of nearly monodispersed CoFe2O4 nanoparticles

Abstract: Nearly monodispersed CoFe2O4 nanoparticles with average sizes between 8 and 100 nm were synthesized by using seed-mediated growth dominant coprecipitation and modified oxidation methods. X-ray diffraction and Mossbauer spectroscopy analyses confirmed the spinel phase and a stoichiometric composition of (Co0.25Fe0.75)[Co0.75Fe1.25]O4 for powders with different particle diameters. Rotational hysteresis loss (Wr) analysis showed an average switching field (Hp) of 17 kOe and a magnetic anisotropy field (Hk) of 38 kOe for the 40 nm CoFe2O4 particles. The corresponding magnetocrystalline anisotropy energy constant (K) was about 5.1×106 erg/cc. The Hc and Hp results suggest that the critical single-domain size of CoFe2O4 is about 40 nm. The room temperature coercivity (Hc) of the 40 nm CoFe2O4 particles is found to be as high as 4.65 kOe.

Magnetostrictive Rare Earth-Fe2 Compounds

Abstract: By the early 1960’s, it was widely recognized that the rare earths possessed many extraordinary magnetic properties. Neutron diffraction measurements, for example, showed that the spin structures were much more complex than those of any of the classical ferromagnets or antiferromagnets. More importantly, in the heavy rare earth metals, the parallel coupling of large orbital and large spin angular momenta yielded huge magnetic moments of 9μ B and 10μ B, dwarfing the conventional values of 0.6 for Ni and 2.2 for Fe. Enormous magnetic anisotropies were also encountered in the heavy rare earth elements. In 1963, a breakthrough in magnetostrictive materials occurred with the measurement of the basal plane magnetostrictions of Tb and Dy at low temperatures (Legvold et al. 1963, Clark et al. 1963, 1965, Rhyne and Legvold 1965). These basal plane strains are 100 to 10000 times typical magnetostrictions and still remain today the largest known (~1%). Over wide temperature ranges, thermal expansions are dominated by the temperature dependences of the magnetostrains. Elastic moduli were found to be strongly influenced by the unprecedented magnetoelastic interactions. However, because of the low ordering temperatures of the rare earths the application of these magnetostrictive properties to devices operating at room temperature could not be achieved with the elements. Only Gd, which is essentially non-magnetostrictive, possesses a Curie point as high as room temperature.