Emanuele Ostuni

Bio: Emanuele Ostuni is an academic researcher from Harvard University. The author has contributed to research in topics: Layer (electronics) & Microcontact printing. The author has an hindex of 34, co-authored 58 publications receiving 13126 citations. Previous affiliations of Emanuele Ostuni include Brigham and Women's Hospital.

Soft Lithography in Biology and Biochemistry

Abstract: ▪ Abstract Soft lithography, a set of techniques for microfabrication, is based on printing and molding using elastomeric stamps with the patterns of interest in bas-relief. As a technique for fabricating microstructures for biological applications, soft lithography overcomes many of the shortcomings of photolithography. In particular, soft lithography offers the ability to control the molecular structure of surfaces and to pattern the complex molecules relevant to biology, to fabricate channel structures appropriate for microfluidics, and to pattern and manipulate cells. For the relatively large feature sizes used in biology (≥50 μm), production of prototype patterns and structures is convenient, inexpensive, and rapid. Self-assembled monolayers of alkanethiolates on gold are particularly easy to pattern by soft lithography, and they provide exquisite control over surface biochemistry.

A Survey of Structure−Property Relationships of Surfaces that Resist the Adsorption of Protein

Abstract: This paper describes the use of surface plasmon resonance (SPR) spectroscopy and self-assembled monolayers (SAMs) to determine the characteristics of functional groups that give surfaces the ability to resist the nonspecific adsorption of proteins from solution. Mixed SAMs presenting different functional groups were prepared for screening using a synthetic protocol based on the reaction of organic amines with a SAM terminated by interchain carboxylic anhydride groups. Surfaces that presented derivatives of oligo(sarcosine), N-acetylpiperazine, and permethylated sorbitol groups were particularly effective in resisting the adsorption of proteins. Incorporation of these groups into single-component SAMs resulted in surfaces that are comparable to (but slightly less good than) single-component SAMs that present oligo(ethylene glycol) in their ability to resist the adsorption of proteins. In the group of surfaces examined, those that resisted the adsorption of proteins had the following properties: they were ...

Patterning proteins and cells using soft lithography

Abstract: This review describes the pattering of proteins and cells using a non-photolithographic microfabrication technology, which we call &soft lithography’ because it consists of a set of related techniques, each of which uses stamps or channels fabricated in an elastomeric (&soft’) material for pattern transfer. The review covers three soft lithographic techniques: microcontact printing, patterning using micro#uidic channels, and laminar #ow patterning. These soft lithographic techniques are inexpensive, are procedurally simple, and can be used to pattern a variety of planar and non-planar substrates. Their successful application does not require stringent regulation of the laboratory environment, and they can be used to pattern surfaces with delicate ligands. They provide control over both the surface chemistry and the cellular environment. We discuss both the procedures for patterning based on these soft lithographic techniques, and their applications in biosensor technology, in tissue engineering, and for fundamental studies in cell biology. ( 1999 Elsevier Science Ltd. All rights reserved.

Patterning cells and their environments using multiple laminar fluid flows in capillary networks.

Abstract: This paper describes the use of laminar flow of liquids in capillary systems to pattern the cell culture substrate, to perform patterned cell deposition, and to pattern the cell culture media. We demonstrate the patterning of the cell culture substrate with different proteins, the patterning of different types of cells adjacent to each other, the patterned delivery of chemicals to adhered cells, and performing enzymatic reactions over select cells or over a portion of a cell. This method offers a way to simultaneously control the characteristics of the surface to which cells are attached, the type of cells that are in their vicinity, and the kind of media that cells or part of a cell are exposed to. The method is experimentally simple, highly adaptable, and requires no special equipment except for an elastomeric relief that can be readily prepared by rapid prototyping.

Self-assembled monolayers that resist the adsorption of proteins and the adhesion of bacterial and mammalian cells

Abstract: This paper examines the hypothesis that surfaces resistant to protein adsorption should also be resistant to the adhesion of bacteria (Staphylococcus aureus, Staphylococcus epidermidis) and the attachment and spreading of mammalian cells (bovine capillary endothelial (BCE) cells). The surfaces tested were those of self-assembled monolayers (SAMs) terminated with derivatives of tri(sarcosine) (Sarc), N-acetylpiperazine, permethylated sorbitol, hexamethylphosphoramide, phosphoryl choline, and an intramolecular zwitterion (−CH2N+(CH3)2CH2CH2CH2SO3-) (ZW); all are known to resist the adsorption of proteins. There seems to be little or no correlation between the adsorption of protein (fibrinogen and lysozyme) and the adhesion of cells. Surfaces terminated with derivatives of Sarc and N-acetylpiperazine resisted the adhesion of S. aureus and S. epidermidis as well as did surfaces terminated with tri(ethylene glycol). A surface that presented Sarc groups was the only one that resisted the adhesion of BCE cells a...

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

The origins and the future of microfluidics

Abstract: The manipulation of fluids in channels with dimensions of tens of micrometres--microfluidics--has emerged as a distinct new field. Microfluidics has the potential to influence subject areas from chemical synthesis and biological analysis to optics and information technology. But the field is still at an early stage of development. Even as the basic science and technological demonstrations develop, other problems must be addressed: choosing and focusing on initial applications, and developing strategies to complete the cycle of development, including commercialization. The solutions to these problems will require imagination and ingenuity.

Rapid prototyping of microfluidic systems in poly(dimethylsiloxane)

Abstract: This paper describes a procedure that makes it possible to design and fabricate (including sealing) microfluidic systems in an elastomeric materialpoly(dimethylsiloxane) (PDMS)in less than 24 h. A network of microfluidic channels (with width >20 μm) is designed in a CAD program. This design is converted into a transparency by a high-resolution printer; this transparency is used as a mask in photolithography to create a master in positive relief photoresist. PDMS cast against the master yields a polymeric replica containing a network of channels. The surface of this replica, and that of a flat slab of PDMS, are oxidized in an oxygen plasma. These oxidized surfaces seal tightly and irreversibly when brought into conformal contact. Oxidized PDMS also seals irreversibly to other materials used in microfluidic systems, such as glass, silicon, silicon oxide, and oxidized polystyrene; a number of substrates for devices are, therefore, practical options. Oxidation of the PDMS has the additional advantage that it ...

The Future of Seawater Desalination: Energy, Technology, and the Environment

Abstract: In recent years, numerous large-scale seawater desalination plants have been built in water-stressed countries to augment available water resources, and construction of new desalination plants is expected to increase in the near future. Despite major advancements in desalination technologies, seawater desalination is still more energy intensive compared to conventional technologies for the treatment of fresh water. There are also concerns about the potential environmental impacts of large-scale seawater desalination plants. Here, we review the possible reductions in energy demand by state-of-the-art seawater desalination technologies, the potential role of advanced materials and innovative technologies in improving performance, and the sustainability of desalination as a technological solution to global water shortages.