Eng Liang Lim

Bio: Eng Liang Lim is an academic researcher from National University of Malaysia. The author has contributed to research in topics: Perovskite (structure) & Materials science. The author has an hindex of 9, co-authored 19 publications receiving 462 citations. Previous affiliations of Eng Liang Lim include Sun Yat-sen University & Fudan University.

The architecture of the electron transport layer for a perovskite solar cell

Abstract: The emergence of perovskite solar cells (PSCs) recently has brought new hope to the solar cell industry due to their incredible improvement of the power conversion efficiency (PCE), which can now exceed 20.0% within seven years of tremendous research. The efficiency and stability of PSCs depend strongly on the morphology and type of materials selected as the electron transport layer (ETL) in the device. In this review, the functions of the ETL based on titania (TiO2) in n–i–p architecture PSCs, including planar heterojunction and mesoporous-structured devices, are reviewed in terms of the device performance and stability. Studies found that the application of suitable fabrication techniques and manipulation of the nanostructural properties of TiO2 are crucial factors in ameliorating the short-circuit current density, JSC, and fill factor, FF, of PSCs. On top of that, the effect of substituting TiO2 with other potential inorganic materials like zinc oxide (ZnO), tin oxide (SnO2), ternary metal oxides, and metal sulphides, as well as organic semiconductors including fullerene, graphene, and ionic liquids, towards the photovoltaic properties and stability of the devices are also elaborated and discussed. Meanwhile, the utilization of non-electron transport layers (non-ETLs), such as alumina (Al2O3) and zirconia (ZrO2), as the mesoporous scaffold in PSCs is found to enhance the open-circuit voltage, VOC, of the devices.

A review of organic small molecule-based hole-transporting materials for meso-structured organic-inorganic perovskite solar cells

Abstract: This review summarizes the current designs and development of new types of organic small molecules as a hole-transporting material (HTM) in a meso-structured perovskite solar cell (PSC). The roles of each layer in the meso-structured perovskite device architecture are elaborated and the employment of new types of organic HTMs in the device is compared with the commercially available HTM spiro-OMeTAD in terms of the properties, device performance and stability. The studies found that nearly half of the new synthesized and pristine HTMs have comparable or better photovoltaic properties than those of doped spiro-OMeTAD. These HTMs have the characteristics of a fused planar core structure with extended π-conjugated lengths and electron-donating functional groups, which are believed to contribute to their high intrinsic conductivity and help make them an alternative to spiro-OMeTAD as a better HTM in meso-structured PSCs. Some of the devices based on the new synthesized HTMs even have longer device lifetimes than their spiro-OMeTAD-based PSC counterparts. Moreover, studies found that the cost per gram (Cg) and cost-per-peak Watt (Cw) of synthesized HTMs can be reduced via minimizing the number of synthesis steps and by optimization of the starting materials in order to yield low-cost HTMs for meso-structured PSC applications.

Stable Layered 2D Perovskite Solar Cells with an Efficiency of over 19% via Multifunctional Interfacial Engineering.

Abstract: Layered 2D perovskites have been extensively investigated by scientists with photovoltaics (PV) expertise due to their good environmental stability. However, a random phase distribution in the perovskite film could affect both the performance and stability of the devices. To overcome this problem, we propose multifunctional interface engineering of 2D GA2MA4Pb5I16 perovskite by employing guanidinium bromide (GABr) on top of it to optimize the secondary crystallization process. It is found that GABr treatment can facilitate to form a shiny and smooth surface of the 2D GA2MA4Pb5I16 film with excellent optoelectronic properties. Thus, we realize efficient and stable 2D perovskite solar cells (PSCs) with a champion power conversion efficiency (PCE) of 19.3% under AM 1.5G illumination. Additionally, the optimized device without encapsulation could retain 94% of the initial PCE for more than 3000 h after being stored under ambient conditions.

A Mini Review: Can Graphene Be a Novel Material for Perovskite Solar Cell Applications?

Abstract: Perovskite solar cells (PSCs) have raised research interest in scientific community because their power conversion efficiency is comparable to that of traditional commercial solar cells (i.e., amorphous Si, GaAs, and CdTe). Apart from that, PSCs are lightweight, are flexible, and have low production costs. Recently, graphene has been used as a novel material for PSC applications due to its excellent optical, electrical, and mechanical properties. The hydrophobic nature of graphene surface can provide protection against air moisture from the surrounding medium, which can improve the lifetime of devices. Herein, we review recent developments in the use of graphene for PSC applications as a conductive electrode, carrier transporting material, and stabilizer material. By exploring the application of graphene in PSCs, a new class of strategies can be developed to improve the device performance and stability before it can be commercialized in the photovoltaic market in the near future.

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics.

Abstract: This review article examines the current state of understanding in how metal halide perovskite solar cells can degrade when exposed to moisture, oxygen, heat, light, mechanical stress, and reverse bias. It also highlights strategies for improving stability, such as tuning the composition of the perovskite, introducing hydrophobic coatings, replacing metal electrodes with carbon or transparent conducting oxides, and packaging. The article concludes with recommendations on how accelerated testing should be performed to rapidly develop solar cells that are both extraordinarily efficient and stable.

The rapid evolution of highly efficient perovskite solar cells

Abstract: Perovskite solar cells (PSCs) have attracted much attention because of their rapid rise to 22% efficiencies. Here, we review the rapid evolution of PSCs as they enter a new phase that could revolutionize the photovoltaic industry. In particular, we describe the properties that make perovskites so remarkable, and the current understanding of the PSC device physics, including the operation of state-of-the-art solar cells with efficiencies above 20%. The extraordinary progress of long-term stability is discussed and we provide an outlook on what the future of PSCs might soon bring the photovoltaic community. Some challenges remain in terms of reducing non-radiative recombination and increasing conductivity of the different device layers, and these will be discussed in depth in this review.

Halide Perovskites: Is It All about the Interfaces?

Abstract: Design and modification of interfaces, always a critical issue for semiconductor devices, has become a primary tool to harness the full potential of halide perovskite (HaP)-based optoelectronics, including photovoltaics and light-emitting diodes. In particular, the outstanding improvements in HaP solar cell performance and stability can be primarily ascribed to a careful choice of the interfacial layout in the layer stack. In this review, we describe the unique challenges and opportunities of these approaches (section 1). For this purpose, we first elucidate the basic physical and chemical properties of the exposed HaP thin film and crystal surfaces, including topics such as surface termination, surface reactivity, and electronic structure (section 2). This is followed by discussing experimental results on the energetic alignment processes at the interfaces between the HaP and transport and buffer layers. This section includes understandings reached as well as commonly proposed and applied models, especia...

Recent Progress on the Long-Term Stability of Perovskite Solar Cells.

Abstract: As rapid progress has been achieved in emerging thin film solar cell technology, organic-inorganic hybrid perovskite solar cells (PVSCs) have aroused many concerns with several desired properties for photovoltaic applications, including large absorption coefficients, excellent carrier mobility, long charge carrier diffusion lengths, low-cost, and unbelievable progress. Power conversion efficiencies increased from 3.8% in 2009 up to the current world record of 22.1%. However, poor long-term stability of PVSCs limits the future commercial application. Here, the degradation mechanisms for unstable perovskite materials and their corresponding solar cells are discussed. The strategies for enhancing the stability of perovskite materials and PVSCs are also summarized. This review is expected to provide helpful insights for further enhancing the stability of perovskite materials and PVSCs in this exciting field.