Engelbert Nagel

Bio: Engelbert Nagel is an academic researcher from German Aerospace Center. The author has contributed to research in topics: Lidar & Doppler effect. The author has an hindex of 4, co-authored 17 publications receiving 225 citations.

The Airborne Demonstrator for the Direct-Detection Doppler Wind Lidar ALADIN on ADM-Aeolus. Part I: Instrument Design and Comparison to Satellite Instrument

Abstract: The global observation of profiles of the atmospheric wind speed is the highest-priority unmet need for global numerical weather prediction. Satellite Doppler lidar is the most promising candidate to meet the requirements on global wind profile observations with high vertical resolution, precision, and accuracy. The European Space Agency (ESA) decided to implement a Doppler wind lidar mission called the Atmospheric Dynamics Mission Aeolus (ADM-Aeolus) to demonstrate the potential of the Doppler lidar technology and the expected impact on numerical weather forecasting. An airborne prototype of the instrument on ADM-Aeolus was developed to validate the instrument concept and retrieval algorithms with realistic atmospheric observations before the satellite launch. It is the first airborne direct-detection Doppler lidar for atmospheric observations, and it is operating at an ultraviolet wavelength of 355 nm. The optical design is described in detail, including the single-frequency pulsed laser and th...

Wind infrared Doppler lidar instrument

Abstract: The purpose of the project WIND (wind infrared Doppler lidar) is the development of an airborne conical scanning CO2 Doppler lidar in French-German cooperation by CNRS/CNES and DLR. The instrument and its peculiarities are described. Measurements of the Doppler shift from a moving platform with an accuracy of 1 m/s require instantaneous access to the position data of the platform. Therefore this part of the instrument is described in detail. Ground-based tests, airborne tests and a validation flight were performed. The instrument can be used for me- soscalic meteorology to test models and contribute to a spaceborne Doppler lidar in the future. © 2001 Society of Photo-Optical Instrumentation Engi- neers. (DOI: 10.1117/1.1335530)

A diode-pumped Nd: YAG lidar for airborne cloud measurements

Abstract: A new diode-pumped Nd: YAG laser with a high repetition rate, for applications in small-size lidars, has been developed. In this paper first results from airborne measurements are presented. Together with a sophisticated receiver set-up for detection of multiple scattering and depolarization effects, this new laser offers a unique possibility for airborne remote sensing of clouds.

Pre-Launch Validation of ADM-Aeolus with an airborne direct-detection wind lidar.

Abstract: The Atmospheric Dynamics Mission ADM-Aeolus of ESA will be the first lidar mission to sense the global wind field from space. It is based on a direct-detection Doppler lidar operating at 355 nm with two interferometers for aerosol/cloud and molecular backscatter. In order to assess the radiometric and wind measurement performance of the Doppler lidar ALADIN on ADM-Aeolus, an airborne version – the ALADIN Airborne Demonstrator A2D – was developed. The A2D is the first airborne directdetection Doppler lidar worldwide. The A2D receiver and laser transmitter performance characterization will be presented. Findings from two ground campaigns at the Observatory Lindenberg of German Weather Service in 2006 and 2007 using a wide variety of collocated observations will be discussed. The first results of an airborne campaign with the A2D and a coherent 2-μm wind lidar aboard the same aircraft will be shown.

Speckle Noise Reduction by Fiber Scrambling for Improving the Measurement Precision of an Airborne Wind Lidar System

Abstract: Optical guidance of coherent light in multimode fibers involves the generation of a speckle pattern at the fiber output due to the interference of the modes traveling in the fiber. Since the speckle pattern is sensitive to external perturbations (temperature, stress) as well as polarization and wavelength changes of the guided light, speckle noise is introduced limiting the quality and precision of fiber-coupled devices employed in various spectroscopic and imaging applications such as optical coherence tomography or differential absorption lidar [1].

Airborne observations of the Eyjafjalla volcano ash cloud over Europe during air space closure in April and May 2010

Abstract: . Airborne lidar and in-situ measurements of aerosols and trace gases were performed in volcanic ash plumes over Europe between Southern Germany and Iceland with the Falcon aircraft during the eruption period of the Eyjafjalla volcano between 19 April and 18 May 2010. Flight planning and measurement analyses were supported by a refined Meteosat ash product and trajectory model analysis. The volcanic ash plume was observed with lidar directly over the volcano and up to a distance of 2700 km downwind, and up to 120 h plume ages. Aged ash layers were between a few 100 m to 3 km deep, occurred between 1 and 7 km altitude, and were typically 100 to 300 km wide. Particles collected by impactors had diameters up to 20 μm diameter, with size and age dependent composition. Ash mass concentrations were derived from optical particle spectrometers for a particle density of 2.6 g cm−3 and various values of the refractive index (RI, real part: 1.59; 3 values for the imaginary part: 0, 0.004 and 0.008). The mass concentrations, effective diameters and related optical properties were compared with ground-based lidar observations. Theoretical considerations of particle sedimentation constrain the particle diameters to those obtained for the lower RI values. The ash mass concentration results have an uncertainty of a factor of two. The maximum ash mass concentration encountered during the 17 flights with 34 ash plume penetrations was below 1 mg m−3. The Falcon flew in ash clouds up to about 0.8 mg m−3 for a few minutes and in an ash cloud with approximately 0.2 mg m−3 mean-concentration for about one hour without engine damage. The ash plumes were rather dry and correlated with considerable CO and SO2 increases and O3 decreases. To first order, ash concentration and SO2 mixing ratio in the plumes decreased by a factor of two within less than a day. In fresh plumes, the SO2 and CO concentration increases were correlated with the ash mass concentration. The ash plumes were often visible slantwise as faint dark layers, even for concentrations below 0.1 mg m−3. The large abundance of volatile Aitken mode particles suggests previous nucleation of sulfuric acid droplets. The effective diameters range between 0.2 and 3 μm with considerable surface and volume contributions from the Aitken and coarse mode aerosol, respectively. The distal ash mass flux on 2 May was of the order of 500 (240–1600) kg s−1. The volcano induced about 10 (2.5–50) Tg of distal ash mass and about 3 (0.6–23) Tg of SO2 during the whole eruption period. The results of the Falcon flights were used to support the responsible agencies in their decisions concerning air traffic in the presence of volcanic ash.

The atmospheric dynamics mission for global wind field measurement

Abstract: The prime aim of the Atmospheric Dynamics Mission is to demonstrate measurements of vertical wind profiles from space. Extensive studies conducted by the European Space Agency over the past 15 years have culminated in the selection of a high-performance Doppler wind lidar based on direct-detection interferometric techniques. Such a system, with a pulsed laser operating at 355-nm wavelength, would utilize both Rayleigh scattering from molecules and Mie scattering from thin cloud and aerosol particles; measurement of the residual Doppler shift from successive levels in the atmosphere provides the vertical wind profiles. The lidar would be accommodated on a satellite flying in a sun-synchronous orbit, at an altitude of ~400 km, providing near-global coverage; target date for launch is in 2007. Processing of the backscatter signals will provide about 3000 globally distributed wind profiles per day, above thick clouds or down to the surface in clear air, at typically 200-km separation along the satellite track...

Seasonal evolution of the West African heat low: a climatological perspective

Abstract: The West African heat low (WAHL), a region of high surface temperatures and low surface pressures, is a key element of the West African monsoon system. In this study, we propose a method to detect the WAHL in order to monitor its climatological seasonal displacement over West Africa during the period 1979-2001, using the European Centre for Medium-range Weather Forecast (ECMWF) ERA-40 reanalyses. The low-level atmospheric thickness (LLAT), a variable defined as the difference of geopotential heights at 700 and 925 hPa, is used to detect the dilatation of these levels generated by an increase of the temperature. We define grid points with 10% highest values of the LLAT as the WAHL. We show that our method reliably positions the WAHL over areas of high surface temperatures and low surface pressures, and that it is effective at detecting heat lows. In the course of the year, the climatological WAHL is shown to migrate north-westward from a position south of the Darfur mountains in the winter (November-March) to a location over the Sahara, between the Hoggar and the Atlas mountains, during the summer (June-September). The temperature tendency equation is used to investigate the processes controlling the displacement of the WAHL, and more particularly the heating at low levels. The specific period of the onset of the WAHL in its summer location over the Sahara (referred to as the Saharan heat low -SHL- onset) is also analysed during the 1984-2001 period, using complementary brightness temperature data from the European Union-funded Cloud Archive User Service (CLAUS). The climatological onset of the SHL occurs around 20 June, i.e. just before the climatological monsoon onset date. The present study suggests that the onset of the WAHL occurs approximately 5 days before the monsoon onset for the 1984-2001 period. This is confirmed independently by comparing the SHL onset date and the monsoon onset date for the 1984-2001 period. The seasonal evolution of the WAHL for the year 2006 (the year of the African Monsoon Multidisciplinary Analysis project Special Observation Period) is analysed and compared with the climatological results. The operational ECMWF analyses were used for that purpose. Except in April, the spatial distribution of the WAHL remains relatively unchanged and agrees with the climatology. The onset of the SHL in 2006 occurs on 18 June, which is close to the climatological date, in spite of the delay in the onset of the rainy season in Sahel.

Aerosol classification by airborne high spectral resolution lidar observations

Abstract: . During four aircraft field experiments with the DLR research aircraft Falcon in 1998 (LACE), 2006 (SAMUM-1) and 2008 (SAMUM-2 and EUCAARI), airborne High Spectral Resolution Lidar (HSRL) and in situ measurements of aerosol microphysical and optical properties were performed. Altogether, the properties of six different aerosol types and aerosol mixtures – Saharan mineral dust, Saharan dust mixtures, Canadian biomass burning aerosol, African biomass burning mixture, anthropogenic pollution aerosol, and marine aerosol have been studied. On the basis of this extensive HSRL data set, we present an aerosol classification scheme which is also capable to identify mixtures of different aerosol types. We calculated mixing lines that allowed us to determine the contributing aerosol types. The aerosol classification scheme was supported by backward trajectory analysis and validated with in-situ measurements. Our results demonstrate that the developed aerosol mask is capable to identify complex stratifications with different aerosol types throughout the atmosphere.

Dust emissions over the Sahel associated with the West African monsoon intertropical discontinuity region: A representative case-study

Abstract: Near-dawn airborne lidar and dropsonde observations acquired on 7 July 2006, during the African Monsoon Multidisciplinary Analysis (AMMA) Special Observing Period 2a1, were used to investigate dust mobilization, lifting and transport in the intertropical discontinuity (ITD) region over western Niger. Atmospheric reflectivity data from the LEANDRE 2 lidar system enabled us to analyse the structure of dust plumes in the context of wind and thermodynamic information provided by the WIND lidar system and dropsondes. Dust mobilization was mainly observed in two locations: (a) within the monsoon flow as the result of the passage of a density current originating from a mesoscale convective system over southwest Niger, and (b) at the leading edge of the monsoon flow where the near-surface winds and turbulence were strong, because the monsoon flow was behaving as an intrusive density current. The circulation in the head of the monsoon density current lifted the mobilized dust towards the wake, along an isentropic surface. Behind and away from the leading edge, some of the mobilized dust was observed to mix across the monsoon-harmattan interface, due to the existence of mechanical shear above the monsoon layer. The dust thus becomes available for long-range transport by the harmattan. Because dust sources are widespread over the Sahel and presumably active on many days when the ITD is located in this region during summer, dust emissions associated with the described mechanism may influence the radiation budget over West Africa.