Ephraim M Sparrow

Bio: Ephraim M Sparrow is an academic researcher from University of Minnesota. The author has contributed to research in topics: Heat transfer & Heat transfer coefficient. The author has an hindex of 77, co-authored 552 publications receiving 27226 citations. Previous affiliations of Ephraim M Sparrow include National Science Foundation & University of Illinois at Chicago.

Design analysis of fluid-flow through perforated plates

Abstract: The performance of the perforated plates in fluid-flow applications is evaluated by measuring the pressure drop of the working fluid. The purpose of this investigation is to determine how different parameters affect the capability of the perforated plates and modify the design by using a design of experiment analysis, namely Taguchi method for optimization. The flow characteristics, which were obtained by the Computational Fluid Dynamics (CFD) software package ANSYS-CFX, were used for this analysis. The design parameters which affect the pressure loss are Reynolds number (A), porosity (B), non-dimensional thickness of the plate (C) and hole pattern (D). The level of importance of the design parameters are determined by use of analysis of variance method, ANOVA. According to the analysis, the optimum values are obtained for the case A8B2C2D1 (Re = 15000, porosity = 50.3, t/D = 1, and staggered hole). The most effective design parameter on the results is found as porosity (92%), while the least effective is the hole pattern (0.2%). A special dividend of this work was to demonstrate the capabilities of the Taguchi Method as a powerful means of increasing the effectiveness of numerical simulation.

Planar or radial freezing with solid-solid transitions and convective heating atthe solid-liquid interface

Abstract: Numerical solutions have been carried out for planar or radial freezing on a cooled wall or cylinder maintained at a uniform temperature lower than the fusion temperature. The solutions were obtained by using an implicit/explicit method developed in the preceding paper in this issue. Results are presented for the frozen layer thick-ness, the instantaneous heat flux at the cooled surface, and the time-integrated heat transfer at the surface, all as a function of time from the beginning of the freezing period. These quantities are normalized in various ways to illuminate their short-time and long-time behaviors and to enable comparisons between planar and radial freezing. Convection at the solid-liquid interface had virtually no effect on the freezing process at short times, but at longer times the convection significantly slowed the freezing and ultimately terminated it. Solid-solid transitions tended to slow the freezing and also to increase the heat transfer at the cooled surface.

Numerical Simulation of Axisymmetric, Turbulent Buoyant Plumes—Application to Displacement Ventilation

Abstract: The displacement ventilation method of providing quality indoor air relies on the use of buoyant plumes generated by discrete heat sources. A number of practical displacement ventilation techniques are based on the model of a buoyant plume generated by a point heat source. Such a model has a number of intrinsic flaws. In particular, it is inapplicable in a finite region above the source. Furthermore, the solutions for the point source, when obtained for turbulent flow, require empirical inputs for their completion. These limitations have motivated the present numerical simulation. Consideration is given here to the turbulent buoyant plume generated by a heated finite sphere. In the limit of a vanishing radius, the sphere reduces to a point source. The numerical simulations are based on a model free of simplifying assumptions, aside from axisymmetry. The resulting numerical solutions have quantified the zone in which the point-source solutions are valid. Furthermore, the virtual origins needed to give mean...

Heat Transfer From a Yawed Finned Tube

Abstract: Etude experimentale de l'influence de l'inclinaison du tube a ailette sur le transfert de chaleur en convection forcee

Pattern formation outside of equilibrium

Abstract: A comprehensive review of spatiotemporal pattern formation in systems driven away from equilibrium is presented, with emphasis on comparisons between theory and quantitative experiments. Examples include patterns in hydrodynamic systems such as thermal convection in pure fluids and binary mixtures, Taylor-Couette flow, parametric-wave instabilities, as well as patterns in solidification fronts, nonlinear optics, oscillatory chemical reactions and excitable biological media. The theoretical starting point is usually a set of deterministic equations of motion, typically in the form of nonlinear partial differential equations. These are sometimes supplemented by stochastic terms representing thermal or instrumental noise, but for macroscopic systems and carefully designed experiments the stochastic forces are often negligible. An aim of theory is to describe solutions of the deterministic equations that are likely to be reached starting from typical initial conditions and to persist at long times. A unified description is developed, based on the linear instabilities of a homogeneous state, which leads naturally to a classification of patterns in terms of the characteristic wave vector q0 and frequency ω0 of the instability. Type Is systems (ω0=0, q0≠0) are stationary in time and periodic in space; type IIIo systems (ω0≠0, q0=0) are periodic in time and uniform in space; and type Io systems (ω0≠0, q0≠0) are periodic in both space and time. Near a continuous (or supercritical) instability, the dynamics may be accurately described via "amplitude equations," whose form is universal for each type of instability. The specifics of each system enter only through the nonuniversal coefficients. Far from the instability threshold a different universal description known as the "phase equation" may be derived, but it is restricted to slow distortions of an ideal pattern. For many systems appropriate starting equations are either not known or too complicated to analyze conveniently. It is thus useful to introduce phenomenological order-parameter models, which lead to the correct amplitude equations near threshold, and which may be solved analytically or numerically in the nonlinear regime away from the instability. The above theoretical methods are useful in analyzing "real pattern effects" such as the influence of external boundaries, or the formation and dynamics of defects in ideal structures. An important element in nonequilibrium systems is the appearance of deterministic chaos. A greal deal is known about systems with a small number of degrees of freedom displaying "temporal chaos," where the structure of the phase space can be analyzed in detail. For spatially extended systems with many degrees of freedom, on the other hand, one is dealing with spatiotemporal chaos and appropriate methods of analysis need to be developed. In addition to the general features of nonequilibrium pattern formation discussed above, detailed reviews of theoretical and experimental work on many specific systems are presented. These include Rayleigh-Benard convection in a pure fluid, convection in binary-fluid mixtures, electrohydrodynamic convection in nematic liquid crystals, Taylor-Couette flow between rotating cylinders, parametric surface waves, patterns in certain open flow systems, oscillatory chemical reactions, static and dynamic patterns in biological media, crystallization fronts, and patterns in nonlinear optics. A concluding section summarizes what has and has not been accomplished, and attempts to assess the prospects for the future.

Review on thermal energy storage with phase change materials and applications

Abstract: The use of a latent heat storage system using phase change materials (PCMs) is an effective way of storing thermal energy and has the advantages of high-energy storage density and the isothermal nature of the storage process. PCMs have been widely used in latent heat thermal-storage systems for heat pumps, solar engineering, and spacecraft thermal control applications. The uses of PCMs for heating and cooling applications for buildings have been investigated within the past decade. There are large numbers of PCMs that melt and solidify at a wide range of temperatures, making them attractive in a number of applications. This paper also summarizes the investigation and analysis of the available thermal energy storage systems incorporating PCMs for use in different applications.

Transmission Electron Microscopy

Abstract: We wrote it to be read by, and taught to, senior undergraduates and starting graduate students, rather than studied in a research laboratory. We wrote it using the same style and sentence construction that we have used in countless classroom lectures, rather than how we have written our countless (and much-less read) formal scientificpapers. In this respect particularly, wehave been deliberate in notreferencing the sources of every experimental fact or theoretical concept (although we do include some hints and clues in the chapters). However, at the end of each chapter we have included groups of references that should lead you to the best sources in the literature and help you go into more depth as you become more confident about what you are looking for. We are great believers in the value of history as the basis for under- standing the present and so the history of the techniques and key historical references are threaded throughout the book. Just because a reference is dated in the previous century (or even the antepenultimate century) doesn’t mean it isn’t useful! Likewise, with the numerous figures drawn from across the fields of materials science and engineering and nanotechnology, we do not reference the source in each caption. But at the very end of the book each of our many generous colleagues whose work we have used is clearly acknowledged.

Computer Vision: Algorithms and Applications

Abstract: Humans perceive the three-dimensional structure of the world with apparent ease. However, despite all of the recent advances in computer vision research, the dream of having a computer interpret an image at the same level as a two-year old remains elusive. Why is computer vision such a challenging problem and what is the current state of the art? Computer Vision: Algorithms and Applications explores the variety of techniques commonly used to analyze and interpret images. It also describes challenging real-world applications where vision is being successfully used, both for specialized applications such as medical imaging, and for fun, consumer-level tasks such as image editing and stitching, which students can apply to their own personal photos and videos. More than just a source of recipes, this exceptionally authoritative and comprehensive textbook/reference also takes a scientific approach to basic vision problems, formulating physical models of the imaging process before inverting them to produce descriptions of a scene. These problems are also analyzed using statistical models and solved using rigorous engineering techniques Topics and features: structured to support active curricula and project-oriented courses, with tips in the Introduction for using the book in a variety of customized courses; presents exercises at the end of each chapter with a heavy emphasis on testing algorithms and containing numerous suggestions for small mid-term projects; provides additional material and more detailed mathematical topics in the Appendices, which cover linear algebra, numerical techniques, and Bayesian estimation theory; suggests additional reading at the end of each chapter, including the latest research in each sub-field, in addition to a full Bibliography at the end of the book; supplies supplementary course material for students at the associated website, http://szeliski.org/Book/. Suitable for an upper-level undergraduate or graduate-level course in computer science or engineering, this textbook focuses on basic techniques that work under real-world conditions and encourages students to push their creative boundaries. Its design and exposition also make it eminently suitable as a unique reference to the fundamental techniques and current research literature in computer vision.