Erdmann Frederick Schubert

Bio: Erdmann Frederick Schubert is an academic researcher from Rensselaer Polytechnic Institute. The author has contributed to research in topics: Light-emitting diode & Doping. The author has an hindex of 56, co-authored 225 publications receiving 11207 citations. Previous affiliations of Erdmann Frederick Schubert include Boston University & Bell Labs.

High Extraction Efficiency of Spontaneous Emission from Slabs of Photonic Crystals

Abstract: A thin slab of two-dimensional photonic crystal is shown to alter drastically the radiation pattern of spontaneous emission. More specifically, by eliminating all guided modes at the transition frequencies, spontaneous emission can be coupled entirely to free space modes, resulting in a greatly enhanced extraction efficiency. Such structures might provide a solution to the long-standing problem of poor light extraction from high refractive-index semiconductors in light-emitting diodes.

Experimental analysis and theoretical model for anomalously high ideality factors (n≫2.0) in AlGaN/GaN p-n junction diodes

Abstract: Diode ideality factors much higher than the expected values of 1.0 to 2.0 have been reported in GaN-based p-n junctions. It is shown that moderately doped unipolar heterojunctions as well as metal-semiconductor junctions, in particular the metal contact to p-type GaN, can increase the ideality factor to values greater than 2.0. A relation is derived for the effective ideality factor by taking into account all junctions of the diode structure. Diodes fabricated from a bulk GaN p-n junction and a p-n junction structure with a p-type AlGaN/GaN superlattice display ideality factors of 6.9 and 4.0, respectively. These results are consistent with the theoretical model and the fact that p-type AlGaN/GaN superlattices facilitate the formation of low-resistance ohmic contacts.

Junction–temperature measurement in GaN ultraviolet light-emitting diodes using diode forward voltage method

Abstract: A theoretical model for the dependence of the diode forward voltage (Vf) on junction temperature (Tj) is developed. An expression for dVf∕dT is derived that takes into account all relevant contributions to the temperature dependence of the forward voltage including the intrinsic carrier concentration, the band-gap energy, and the effective density of states. Experimental results on the junction temperature of GaN ultraviolet light-emitting diodes are presented. Excellent agreement between the theoretical and experimental temperature coefficient of the forward voltage (dVf∕dT) is found. A linear relation between the junction temperature and the forward voltage is found.

Ga2O3 films for electronic and optoelectronic applications

Abstract: Properties of Ga2O3 thin films deposited by electron‐beam evaporation from a high‐purity single‐crystal Gd3Ga5O12 source are reported. As‐deposited Ga2O3 films are amorphous, stoichiometric, and homogeneous. Excellent uniformity in thickness and refractive index was obtained over a 2 in. wafer. The films maintain their integrity during annealing up to 800 and 1200 °C on GaAs and Si substrates, respectively. Optical properties including refractive index (n=1.84–1.88 at 980 nm wavelength) and band gap (4.4 eV) are close or identical, respectively, to Ga2O3 bulk properties. Reflectivities as low as 10−5 for Ga2O3/GaAs structures and a small absorption coefficient (≊100 cm−1 at 980 nm) were measured. Dielectric properties include a static dielectric constant between 9.9 and 10.2, which is identical to bulk Ga2O3, and electric breakdown fields up to 3.6 MV/cm. The Ga2O3/GaAs interface demonstrated a significantly higher photoluminescence intensity and thus a lower surface recombination velocity as compared to ...

Resonant cavity light‐emitting diode

Abstract: A novel concept of a light‐emitting diode (LED) is proposed and demonstrated in which the active region of the device is placed in a resonant optical cavity. As a consequence, the optical emission from the active region is restricted to the modes of the cavity. Resonant cavity light‐emitting diodes (RCLED) have higher spectral purity and higher emission intensity as compared to conventional light emitting diodes. Results on a top‐emitting RCLED structure with AlAs/AlxGa1−xAs quarter wave mirrors grown by molecular beam epitaxy are presented. The experimental emission linewidth is 17 meV (0.65 kT) at room temperature. The top‐emission intensity is a factor of 1.7 higher as compared to conventional LEDs.

Band parameters for III–V compound semiconductors and their alloys

Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.

Optical properties of metallic films for vertical-cavity optoelectronic devices.

Abstract: We present models for the optical functions of 11 metals used as mirrors and contacts in optoelectronic and optical devices: noble metals (Ag, Au, Cu), aluminum, beryllium, and transition metals (Cr, Ni, Pd, Pt, Ti, W). We used two simple phenomenological models, the Lorentz-Drude (LD) and the Brendel-Bormann (BB), to interpret both the free-electron and the interband parts of the dielectric response of metals in a wide spectral range from 0.1 to 6 eV. Our results show that the BB model was needed to describe appropriately the interband absorption in noble metals, while for Al, Be, and the transition metals both models exhibit good agreement with the experimental data. A comparison with measurements on surface normal structures confirmed that the reflectance and the phase change on reflection from semiconductor-metal interfaces (including the case of metallic multilayers) can be accurately described by use of the proposed models for the optical functions of metallic films and the matrix method for multilayer calculations.

Solid-State Light Sources Getting Smart

Abstract: More than a century after the introduction of incandescent lighting and half a century after the introduction of fluorescent lighting, solid-state light sources are revolutionizing an increasing number of applications. Whereas the efficiency of conventional incandescent and fluorescent lights is limited by fundamental factors that cannot be overcome, the efficiency of solid-state sources is limited only by human creativity and imagination. The high efficiency of solid-state sources already provides energy savings and environmental benefits in a number of applications. However, solid-state sources also offer controllability of their spectral power distribution, spatial distribution, color temperature, temporal modulation, and polarization properties. Such ‘‘smart’’ light sources can adjust to specific environments and requirements, a property that could result in tremendous benefits in lighting, automobiles, transportation, communication, imaging, agriculture, and medicine.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Two-dimensional electron gases induced by spontaneous and piezoelectric polarization charges in N- and Ga-face AlGaN/GaN heterostructures

Abstract: Carrier concentration profiles of two-dimensional electron gases are investigated in wurtzite, Ga-face AlxGa1−xN/GaN/AlxGa1−xN and N-face GaN/AlxGa1−xN/GaN heterostructures used for the fabrication of field effect transistors. Analysis of the measured electron distributions in heterostructures with AlGaN barrier layers of different Al concentrations (0.15