Erol Hepsaydir

Bio: Erol Hepsaydir is an academic researcher. The author has contributed to research in topics: Spectral efficiency & Cognitive radio. The author has an hindex of 7, co-authored 12 publications receiving 2080 citations.

Cellular architecture and key technologies for 5G wireless communication networks

Abstract: The fourth generation wireless communication systems have been deployed or are soon to be deployed in many countries. However, with an explosion of wireless mobile devices and services, there are still some challenges that cannot be accommodated even by 4G, such as the spectrum crisis and high energy consumption. Wireless system designers have been facing the continuously increasing demand for high data rates and mobility required by new wireless applications and therefore have started research on fifth generation wireless systems that are expected to be deployed beyond 2020. In this article, we propose a potential cellular architecture that separates indoor and outdoor scenarios, and discuss various promising technologies for 5G wireless communication systems, such as massive MIMO, energy-efficient communications, cognitive radio networks, and visible light communications. Future challenges facing these potential technologies are also discussed.

Spectral efficiency analysis of mobile Femtocell based cellular systems

Abstract: In this paper, we propose a new concept called mobile Femtocell (MFemtocell) network, which can be considered as a practical implementation of mobile relays (more precisely, moving networks). MFemtocells can be deployed in moving vehicles, such as trains, buses, or private cars to provide enhanced user throughput, extended coverage, and reduction of the signaling overhead and drop calls. We investigate the spectral efficiency of cellular systems with MFemtocell deployment and two resource partitioning schemes. Simulation results demonstrate that with the deployment of MFemtocells, the spectral efficiency and average user throughput can significantly be increased while the signaling overhead is reduced.

Spectral and Energy Efficiency Analysis for Cognitive Radio Networks

Abstract: Cognitive radio (CR) is considered one of the prominent techniques for improving the utilization of the radio spectrum. A CR network (i.e., secondary network) opportunistically shares the radio resources with a licensed network (i.e., primary network). In this work, the spectral-energy efficiency trade-off for CR networks is analyzed at both link and system levels against varying signal-to-noise ratio (SNR) values. At the link level, we analyze the required energy to achieve a specific spectral efficiency for a CR channel under two different types of power constraint in different fading environments. In this aspect, besides the transmit power constraint, interference constraint at the primary receiver (PR) is also considered to protect the PR from a harmful interference. Whereas at the system level, we study the spectral and energy efficiency for a CR network that shares the spectrum with an indoor network. Adopting the extreme-value theory, we are able to derive the average spectral and energy efficiency of the CR network. It is shown that the spectral efficiency depends upon the number of the PRs, the interference threshold, and how far the secondary receivers (SRs) are located. We characterize the impact of the multi-user diversity gain of both kinds of users on the spectral and energy efficiency of the CR network. Our analysis also proves that the interference channels (i.e., channels between the secondary transmitter and PRs) have no impact on the minimum energy efficiency.

Spectral/Energy Efficiency Tradeoff of Cellular Systems With Mobile Femtocell Deployment

Abstract: The mobile femtocell (MFemtocell) is a new concept that has been recently proposed to be a potential wireless communication technology for next-generation cellular systems. The essence of MFemtocell lies in adopting the femtocell technology inside vehicles such as trains, buses, or private cars to provide better coverage and a good Internet experience while on the move. In this paper, we investigate the spectral and energy efficiency for the MFemtocell-assisted network with different resource partitioning schemes. Closed-form expressions for the relationships between spectral efficiency and energy efficiency are derived for a link-level MFemtocell network. We also investigate the spectral efficiency for multiuser system-level MFemtocells with opportunistic scheduling schemes. Our analysis shows that MFemtocells can provide better spectral and energy efficiency compared with the direct transmission scheme.

Energy-Efficient Subcarrier-and-Bit Allocation in Multi-User OFDMA Systems

Abstract: Energy efficiency is becoming increasingly important for wireless communication systems in order to minimize carbon footprint of wireless networks and to increase the battery life of mobile terminals. The spectral-energy efficiency trade-off is of primary significance to determine how much energy per bit is required in a wireless communication system to achieve a specific spectral efficiency. In this paper, we study energyefficient resource allocation scheme for Orthogonal Frequency- Division Multiple Access (OFDMA) systems with multiple users. The trade-off between spectral and energy efficiencies is analyzed under the constraint of maintaining the fairness among users. We first formulate the energy-efficient optimization problem as an integer fractional programming. We then apply an iterative fractional method to simplify the problem to integer linear programming (ILP) problem. Simulation results demonstrate that the impact of user's quality of service (QoS) is minor on the energy efficiency when a large spectral efficiency is required.

Next Generation 5G Wireless Networks: A Comprehensive Survey

Abstract: The vision of next generation 5G wireless communications lies in providing very high data rates (typically of Gbps order), extremely low latency, manifold increase in base station capacity, and significant improvement in users’ perceived quality of service (QoS), compared to current 4G LTE networks. Ever increasing proliferation of smart devices, introduction of new emerging multimedia applications, together with an exponential rise in wireless data (multimedia) demand and usage is already creating a significant burden on existing cellular networks. 5G wireless systems, with improved data rates, capacity, latency, and QoS are expected to be the panacea of most of the current cellular networks’ problems. In this survey, we make an exhaustive review of wireless evolution toward 5G networks. We first discuss the new architectural changes associated with the radio access network (RAN) design, including air interfaces, smart antennas, cloud and heterogeneous RAN. Subsequently, we make an in-depth survey of underlying novel mm-wave physical layer technologies, encompassing new channel model estimation, directional antenna design, beamforming algorithms, and massive MIMO technologies. Next, the details of MAC layer protocols and multiplexing schemes needed to efficiently support this new physical layer are discussed. We also look into the killer applications, considered as the major driving force behind 5G. In order to understand the improved user experience, we provide highlights of new QoS, QoE, and SON features associated with the 5G evolution. For alleviating the increased network energy consumption and operating expenditure, we make a detail review on energy awareness and cost efficiency. As understanding the current status of 5G implementation is important for its eventual commercialization, we also discuss relevant field trials, drive tests, and simulation experiments. Finally, we point out major existing research issues and identify possible future research directions.

Cellular architecture and key technologies for 5G wireless communication networks

Abstract: The fourth generation wireless communication systems have been deployed or are soon to be deployed in many countries. However, with an explosion of wireless mobile devices and services, there are still some challenges that cannot be accommodated even by 4G, such as the spectrum crisis and high energy consumption. Wireless system designers have been facing the continuously increasing demand for high data rates and mobility required by new wireless applications and therefore have started research on fifth generation wireless systems that are expected to be deployed beyond 2020. In this article, we propose a potential cellular architecture that separates indoor and outdoor scenarios, and discuss various promising technologies for 5G wireless communication systems, such as massive MIMO, energy-efficient communications, cognitive radio networks, and visible light communications. Future challenges facing these potential technologies are also discussed.

A Survey of 5G Network: Architecture and Emerging Technologies

Abstract: In the near future, i.e., beyond 4G, some of the prime objectives or demands that need to be addressed are increased capacity, improved data rate, decreased latency, and better quality of service. To meet these demands, drastic improvements need to be made in cellular network architecture. This paper presents the results of a detailed survey on the fifth generation (5G) cellular network architecture and some of the key emerging technologies that are helpful in improving the architecture and meeting the demands of users. In this detailed survey, the prime focus is on the 5G cellular network architecture, massive multiple input multiple output technology, and device-to-device communication (D2D). Along with this, some of the emerging technologies that are addressed in this paper include interference management, spectrum sharing with cognitive radio, ultra-dense networks, multi-radio access technology association, full duplex radios, millimeter wave solutions for 5G cellular networks, and cloud technologies for 5G radio access networks and software defined networks. In this paper, a general probable 5G cellular network architecture is proposed, which shows that D2D, small cell access points, network cloud, and the Internet of Things can be a part of 5G cellular network architecture. A detailed survey is included regarding current research projects being conducted in different countries by research groups and institutions that are working on 5G technologies.

5G : A tutorial overview of standards, trials, challenges, deployment, and practice

Abstract: There is considerable pressure to define the key requirements of 5G, develop 5G standards, and perform technology trials as quickly as possible. Normally, these activities are best done in series but there is a desire to complete these tasks in parallel so that commercial deployments of 5G can begin by 2020. 5G will not be an incremental improvement over its predecessors; it aims to be a revolutionary leap forward in terms of data rates, latency, massive connectivity, network reliability, and energy efficiency. These capabilities are targeted at realizing high-speed connectivity, the Internet of Things, augmented virtual reality, the tactile internet, and so on. The requirements of 5G are expected to be met by new spectrum in the microwave bands (3.3-4.2 GHz), and utilizing large bandwidths available in mm-wave bands, increasing spatial degrees of freedom via large antenna arrays and 3-D MIMO, network densification, and new waveforms that provide scalability and flexibility to meet the varying demands of 5G services. Unlike the one size fits all 4G core networks, the 5G core network must be flexible and adaptable and is expected to simultaneously provide optimized support for the diverse 5G use case categories. In this paper, we provide an overview of 5G research, standardization trials, and deployment challenges. Due to the enormous scope of 5G systems, it is necessary to provide some direction in a tutorial article, and in this overview, the focus is largely user centric, rather than device centric. In addition to surveying the state of play in the area, we identify leading technologies, evaluating their strengths and weaknesses, and outline the key challenges ahead, with research test beds delivering promising performance but pre-commercial trials lagging behind the desired 5G targets.

Hybrid Digital and Analog Beamforming Design for Large-Scale Antenna Arrays

Abstract: The potential of using of millimeter wave (mmWave) frequency for future wireless cellular communication systems has motivated the study of large-scale antenna arrays for achieving highly directional beamforming. However, the conventional fully digital beamforming methods which require one radio frequency (RF) chain per antenna element is not viable for large-scale antenna arrays due to the high cost and high power consumption of RF chain components in high frequencies. To address the challenge of this hardware limitation, this paper considers a hybrid beamforming architecture in which the overall beamformer consists of a low-dimensional digital beamformer followed by an RF beamformer implemented using analog phase shifters. Our aim is to show that such an architecture can approach the performance of a fully digital scheme with much fewer number of RF chains. Specifically, this paper establishes that if the number of RF chains is twice the total number of data streams, the hybrid beamforming structure can realize any fully digital beamformer exactly, regardless of the number of antenna elements. For cases with fewer number of RF chains, this paper further considers the hybrid beamforming design problem for both the transmission scenario of a point-to-point multiple-input multiple-output (MIMO) system and a downlink multi-user multiple-input single-output (MU-MISO) system. For each scenario, we propose a heuristic hybrid beamforming design that achieves a performance close to the performance of the fully digital beamforming baseline. Finally, the proposed algorithms are modified for the more practical setting in which only finite resolution phase shifters are available. Numerical simulations show that the proposed schemes are effective even when phase shifters with very low resolution are used.