Eszter Udvary

Bio: Eszter Udvary is an academic researcher from Budapest University of Technology and Economics. The author has contributed to research in topics: Optical amplifier & Optical performance monitoring. The author has an hindex of 10, co-authored 90 publications receiving 550 citations.

Optical Wireless Communications: An Emerging Technology

Abstract: This book focuses on optical wireless communications (OWC), an emerging technology with huge potential for the provision of pervasive and reliable next-generation communications networks. It shows how the development of novel and efficient wireless technologies can contribute to a range of transmission links essential for the heterogeneous networks of the future to support various communications services and traffic patterns with ever-increasing demands for higher data-transfer rates. The book starts with a chapter reviewing the OWC field, which explains different sub-technologies (visible-light, ultraviolet (UV) and infrared (IR) communications) and introduces the spectrum of application areas (indoor, vehicular, terrestrial, underwater, intersatellite, deep space, etc.). This provides readers with the necessary background information to understand the specialist material in the main body of the book, which is in four parts. The first of these deals with propagation modelling and channel characterization of OWC channels at different spectral bands and with different applications. The second starts by providing a unified information-theoretic treatment of OWC and then discusses advanced physical-layer methodologies (including, but not limited to: advanced coding, modulation diversity, cooperation and multi-carrier techniques) and the ultimate limitations imposed by practical constraints. On top of the physical layer come the upper-layer protocols and cross-layer designs that are the subject of the third part of the book. The last part of the book features a chapter-by-chapter assessment of selected OWC applications. Optical Wireless Communications is a valuable reference guide for academic researchers and practitioners concerned with the future development of the worlds communication networks. It succinctly but comprehensively presents the latest advances in the field.

Experimental demonstration of multi-Gbps multi sub-bands FBMC transmission in mm-wave radio over a fiber system.

Abstract: The filter bank multicarrier (FBMC) modulation format is considered as a potential candidate for future wireless 5G due to its feature of high suppression for out-of-band emissions, which allows combining multiple sub-bands with very narrow band-gaps, and hence increases the overall wireless transmission capacity. In this paper, we experimentally demonstrate the generation of multi sub-bands FBMC signals at millimeter-wave (mm-wave) for radio-over-fiber (RoF) systems. The designed multi sub-bands FBMC system consists of 5 sub-bands of 800 MHz with inter sub-band gaps of 781.25 kHz. The composite 5 sub-bands FBMC signal is generated with no band-gap between dc to the first sub-band to preserve the bandwidth of the system. Each FBMC sub-band consists of 1024 sub-carriers and is modulated with uncorrelated data sequences. The aggregate FBMC signal is carried optically by externally modulating a free running laser and is converted to millimeter waves (mm-waves) by photomixing with another free running laser at a frequency offset of 53 GHz. At the receiver, the received electrical mm-wave signal is down-converted to an intermediate frequency (IF) and then post-processed using digital signal processing (DSP) techniques. With the use of the simple recursive least square (RLS) equalizer in the DSP receiver, the achieved aggregate data rate is 8 Gbps and 12 Gbps for 16 quadrature amplitude modulation (QAM), and 64 QAM, respectively with a total bandwidth of 4.2 GHz. The system performance is evaluated by measuring error vector magnitude (EVM) and bit error rate (BER) calculations.

Transmission Characteristics of All Semiconductor Fiber Optic Links Carrying Microwave Channels

Abstract: An experimental and theoretical study is presented for the transmission characteristics of all semiconductor fiber optic links carrying microwave channels. The nonlinear distortion and signal to noise ratio are investigated and evaluated in case of multi-carrier transmission. Extremely high spurious free dynamic range is presented achieved by a direct modulated semiconductor laser.

Optical subcarrier label swapping by semiconductor optical amplifiers

Abstract: The semiconductor optical amplifier (SOA) can be used as an efficient high-speed modulator. This paper presents optical subcarrier multiplexed label swapping/reinsertion utilizing this device associated to the wavelength converter block in packet-switched all-optical networks. For that purpose, the modulation response and nonlinear behavior of SOAs are analyzed and experimentally demonstrated.

Fiber-Wireless Networks and Subsystem Technologies

Abstract: Hybrid fiber-wireless networks incorporating WDM technology for fixed wireless access operating in the sub-millimeter-wave and millimeter-wave (mm-wave) frequency regions are being actively pursued to provide untethered connectivity for ultrahigh bandwidth communications. The architecture of such radio networks requires a large number of antenna base-stations with high throughput to be deployed to maximize the geographical coverage with the main switching and routing functionalities located in a centralized location. The transportation of mm-wave wireless signals within the hybrid network is subject to several impairments including low opto-electronic conversion efficiency, fiber chromatic dispersion and also degradation due to nonlinearities along the link. One of the major technical challenges in implementing such networks lies in the mitigation of these various optical impairments that the wireless signals experience within the hybrid network. In this paper, we present an overview of different techniques to optically transport mm-wave wireless signals and to overcome impairments associated with the transport of the wireless signals. We also review the different designs of subsystems for integrating fiber-wireless technology onto existing optical infrastructure.

Emerging Optical Wireless Communications-Advances and Challenges

Abstract: New data services and applications are emerging continuously and enhancing the mobile broadband experience. The ability to cope with these varied and sophisticated services and applications will be a key success factor for the highly demanding future network infrastructure. One such technology that could help address the problem would be optical wireless communications (OWC), which presents a growing research interest in the last few years for indoor and outdoor applications. This paper is an overview of the OWC systems focusing on visible light communications, free space optics, transcutaneous OWC, underwater OWC, and optical scattering communications.

A Comparative Survey of Optical Wireless Technologies: Architectures and Applications

Abstract: New high-data-rate multimedia services and applications are evolving continuously and exponentially increasing the demand for wireless capacity of fifth-generation (5G) and beyond. The existing radio frequency (RF) communication spectrum is insufficient to meet the demands of future high-data-rate 5G services. Optical wireless communication (OWC), which uses an ultra-wide range of unregulated spectrum, has emerged as a promising solution to overcome the RF spectrum crisis. It has attracted growing research interest worldwide in the last decade for indoor and outdoor applications. OWC offloads huge data traffic applications from RF networks. A 100 Gb/s data rate has already been demonstrated through OWC. It offers services indoors as well as outdoors, and communication distances range from several nm to more than 10 000 km. This paper provides a technology overview and a review on optical wireless technologies, such as visible light communication, light fidelity, optical camera communication, free space optical communication, and light detection and ranging. We survey the key technologies for understanding OWC and present state-of-the-art criteria in aspects, such as classification, spectrum use, architecture, and applications. The key contribution of this paper is to clarify the differences among different promising optical wireless technologies and between these technologies and their corresponding similar existing RF technologies.

Visible Light Communication: Concepts, Applications and Challenges

Abstract: During the last decade, the exponential growth of mobile devices and wireless services created a huge demand for radio frequency-based technologies. Meanwhile, the lighting industry has been revolutionized due to the popularization of LED light bulbs, which are more economical and efficient. In that context, visible light communication (VLC) is a disruptive technology based on LEDs that offers a free spectrum and high data rate, which can potentially serve as a complementary technology to the current radio frequency standards. In this paper, we present a comprehensive state-of-the-art survey of VLC, as well as the main concepts and challenges related to this emergent area. We overview VLC technology, from its physical aspects and communication architecture to its main applications and research challenges. Finally, we present the main research platforms available today, along with a deep analysis of the system design and future directions in the field.

Channel Modeling and Characterization for Visible Light Communications

Abstract: In this paper, we present a comprehensive channel modeling and characterization study for visible light communications. Our study is based on ray tracing, which allows for an accurate description of the interaction of rays emitted from the lighting source within a specified confined space. Contrary to existing works, which are mainly limited to ideal Lambertian sources and purely diffuse reflections, our approach is capable of obtaining channel impulse responses (CIRs) for any nonideal sources, as well as specular and mixed specular–diffuse reflections. Furthermore, we can precisely reflect the presence of objects (e.g., furniture) and wavelength-dependent reflection characteristics of surface materials (e.g., ceilings, floor, walls, and furniture) in a channel study. As case studies, we consider a number of indoor environments with various dimensions and different surface materials, i.e., plaster, gloss paint, wood, aluminum metal, and glass. We further consider various scenarios with different transmitter specifications (i.e., single versus multiple transmitters and array type) and receiver specifications (i.e., location and rotation). For each environment, we obtain CIRs and present a channel characterization study where channel parameters, such as channel DC gain, root mean square (RMS) delay spread, coherence bandwidth, and mean excess delay, are obtained. We also make one-to-one comparisons between infrared and visible-light CIRs for the same environments to emphasize the differences between two optical bands.