Ewald Benes

Bio: Ewald Benes is an academic researcher from Vienna University of Technology. The author has contributed to research in topics: Resonator & Ultrasonic sensor. The author has an hindex of 24, co-authored 87 publications receiving 2535 citations. Previous affiliations of Ewald Benes include Massachusetts Institute of Technology.

Sensors based on piezoelectric resonators

Abstract: A review of sensors based on piezoelectric crystal resonators is presented. The survey focuses on the fundamental resonator modes rather than on the variety of surrounding support configurations in special sensor applications. First, the general properties of vibrating crystal sensors and their inherent superiority are described. The sensor concepts utilizing either homogeneous resonators with temperature and pressure (stress) as primary measurants or composite resonators with areal mass density and viscoelastic properties of the 'foreign' layer as primary measurands are discriminated. A comparison between bulk acoustic wave (BAW) and surface acoustic wave (SAW) resonators with respect to their primary sensitivity functions and principal capabilities for sensor applications is given and the importance of recent investigations on Lamb wave and horizontal polarized shear wave (HPLW) interdigital transducer (IDT) resonators is acknowledged. The importance of mode purity for high dynamic range sensors based on resonators and some aspects of the demand on specialized electronics are emphasized. The present state of established sensors based on primary sensitivities, e.g., quartz-crystal thermometers, pressure transducers, thin-film thickness and deposition-rate monitors, viscoelastic layer analysers (crystal/liquid composite resonators) is reviewed. A selection of the most promising recently investigated vibrating crystal sensors utilizing indirect sensitivities is described, including the wide field of analyte-selective coatings and resonator-based immunosensors or immunoassays. Finally, the potential of alternative piezoelectric materials for future sensor developments is briefly discussed.

Ultrasonic separation of suspended particles

Abstract: The forces on suspended particles in acoustic fields are reviewed briefly and the theoretical modelling of ultrasonic separators based on piezoelectrically excited layered resonators is described. Two flow-through resonator chamber concepts for ultrasonic particle (bio-cell) separation are investigated: (a) the coagulation or sedimentation approach, (b) the so-called h-shaped ultrasonic separator. The h-shaped ultrasonic separator is analysed by combining for the first time the mathematical modelling of the laminar flow with the acoustic force based velocity field of the particles relative to the suspension medium. This allows a complete modelling of the resonator's particle separation performance. Examples for separation chamber designs optimized by use of the mathematical model are presented and the calculated particle traces in the h-resonator are shown and compared with experimental results. For direct comparison of different ultrasonic flow through separator concepts a separation performance figure is introduced and its value is given for the two investigated separator concepts for the sample suspensions of polystyrene spheres, yeast and spirulina cells in (salt) water. The presented results are of importance for the state of the art design of acoustic cell filters for perfusion type bioreactors, as recently launched at the biotechnology market, as well as for the ultrasonic separation of plant (algae) cells under low gravity conditions, where the sedimentation concept fails.

General one‐dimensional treatment of the layered piezoelectric resonator with two electrodes

Abstract: A general transfer matrix description of arbitrarily oriented layered piezoelectric structures is presented. Except for the restriction to two electrodes, it is the most general one‐dimensional treatment possible. The description is derived as an exact solution of the fundamental differential equations and the boundary conditions at the terminating surfaces and at the electrical port. It allows the calculation of the electrical admittance appearing between the electrodes for any frequency, as well as the determination of the entire resonance frequency spectrum using only simple matrix multiplications. It covers the general case of multimode excitations and its coupling results. Thus it is not restricted to a single displacement direction and can be used for the rigorous analysis of layered structures containing, e.g., doubly rotated Y‐cut quartz crystals.

A Novel Ultrasonic Resonance Field Device for the Retention of Animal Cells

Abstract: This article describes two types of flow-through cell retention devices based on the concept of layered piezoelectric resonators. A single-chamber device is compared to a novel optimized steam-sterilizable prototype ultrasonic cell separator with improved acoustic design and an integrated cooling circuit, eliminating the problem of local temperature increase caused by the high amplitudes necessary to achieve the separation of animal cells with low acoustic contrast. This setup yields highly reproducible results and is ideal for studying the long-term effects of ultrasonic sound fields and separation efficiency. The novel two-chamber system has the potential for scaleability due to the reduction in thermal and acoustic flow, increased field stability, and separation efficiency. Finally, the effect of power input on separation and cell viability is reported. Such flow-through cell retention systems could be used as systems to retain biomass within the fermentor or as a substitute for centrifugation, with the major advantage of eliminating high-speed rotational motion.

Multilayered piezoelectric resonator for the separation of suspended particles

Abstract: Particulate material suspended in a fluid is separated and recycled by means of an ultrasonic resonance wave. In a preferred embodiment, the ultrasonic resonance field is generated within a multilayered composite resonator system including a transducer, the suspension and a mirror parallel to each other. Dimensions and frequencies resonant to the whole system but not exciting Eigen-frequencies of transducer and mirror itself are chosen so that thermal dissipation is minimized. Generally, the process is suitable for all kinds of particles (solid, liquid or gaseous disperse phases) especially for hydrosols (particles in water) and for separation of biological particles such as mammalian, bacterial and plant cells or aggregates. Specialized applications in biotechnology are described including an acoustic filter for mammalian cell bioreactors or the selective retention of viable cells relative to non-viable cells.

Chip integrated strategies for acoustic separation and manipulation of cells and particles

Abstract: Acoustic standing wave technology combined with microtechnology opens up new areas for the development of advanced particle and cell separating microfluidic systems. This tutorial review outlines the fundamental work performed on continuous flow acoustic standing wave separation of particles in macro scale systems. The transition to the microchip format is further surveyed, where both fabrication and design issues are discussed. The acoustic technology offers attractive features, such as reasonable throughput and ability to separate particles in a size domain of about tenths of micrometers to tens of micrometers. Examples of different particle separation modes enabled in microfluidic chips, utilizing standing wave technology, are described along a discussion of several potential applications in life science research and in the medical clinic. Chip integrated acoustic standing wave separation technology is still in its infancy and it can be anticipated that new laboratory standards very well may emerge from the current research.

Piezoelectric Mass‐Sensing Devices as Biosensors—An Alternative to Optical Biosensors?

Abstract: In the early days of electronic communication-as a result of the limited number of quartz resonators available-frequency adjustment was accomplished by a pencil mark depositing a foreign mass layer on the crystal. In 1959, Sauerbrey showed that the shift in resonance frequency of thickness-shear-mode resonators is proportional to the deposited mass. This was the starting point for the development of a new generation of piezoelectric mass-sensitive devices. However, it was the development of new powerful oscillator circuits that were capable of operating thickness shear mode resonators in fluids that enabled this technique to be introduced into bioanalytic applications. In the last decade adsorption of biomolecules on functionalized surfaces turned in to one of the paramount applications of piezoelectric transducers. These applications include the study of the interaction of DNA and RNA with complementary strands, specific recognition of protein ligands by immobilized receptors, the detection of virus capsids, bacteria, mammalian cells, and last but not least the development of complete immunosensors. Piezoelectric transducers allow a label-free detection of molecules; they are more than mere mass sensors since the sensor response is also influenced by interfacial phenomena, viscoelastic properties of the adhered biomaterial, surface charges of adsorbed molecules, and surface roughness. These new insights have recently been used to investigate the adhesion of cells, liposomes, and proteins onto surfaces, thus allowing the determination of the morphological changes of cells as a response to pharmacological substances and changes in the water content of biopolymers without employing labor-intense techniques. However, the future will show whether the quartz-crystal microbalance will assert itself against established label-free sensor devices such as surface plasmon resonance spectroscopy and interferometry.

Free flow acoustophoresis: Microfluidic-based mode of particle and cell separation

Abstract: A novel method, free flow acoustophoresis (FFA), capable of continuous separation of mixed particle suspensions into multiple outlet fractions is presented. Acoustic forces are utilized to separate particles based on their size and density. The method is shown to be suitable for both biological and nonbiological suspended particles. The microfluidic separation chips were fabricated using conventional microfabrication methods. Particle separation was accomplished by combining laminar flow with the axial acoustic primary radiation force in an ultrasonic standing wave field. Dissimilar suspended particles flowing through the 350-μm-wide channel were thereby laterally translated to different regions of the laminar flow profile, which was split into multiple outlets for continuous fraction collection. Using four outlets, a mixture of 2-, 5-, 8-, and 10-μm polystyrene particles was separated with between 62 and 94% of each particle size ending up in separate fractions. Using three outlets and three particle siz...

Interdigital sensors and transducers

Abstract: This review paper focuses on interdigital electrodes-a geometric structure encountered in a wide variety of sensor and transducer designs. Physical and chemical principles behind the operation of these devices vary so much across different fields of science and technology that the common features present in all devices are often overlooked. This paper attempts to bring under one umbrella capacitive, inductive, dielectric, piezoacoustic, chemical, biological, and microelectromechanical interdigital sensors and transducers. The paper also provides historical perspective, discusses fabrication techniques, modeling of sensor parameters, application examples, and directions of future research.