scispace - formally typeset
Search or ask a question
Author

Feiyu Zhao

Bio: Feiyu Zhao is an academic researcher from Lanzhou University. The author has contributed to research in topics: Materials science & Heterojunction. The author has an hindex of 11, co-authored 25 publications receiving 299 citations.

Papers
More filters
Journal ArticleDOI
01 Jan 2016-Carbon
TL;DR: In this article, the authors report high-performance broadband photodetection devices fabricated using an all-organic heterojunction of fullerene/chloroaluminum phthalocyanine with a high-efficiency exciton-dissociation interface and complementary spectral absorption.

53 citations

Journal ArticleDOI
16 Oct 2017
TL;DR: Li et al. as mentioned in this paper developed an organic-inorganic hybrid photodetector that outperforms conventional inorganic like Si and InGaAs-based photodetsors in at least two aspects: broader detection spectral range and much lower dark current.
Abstract: Organolead halide perovskite is a newly emerging low-cost, solution-processable material with a broadband absorption from the ultraviolet (UV) to visible (Vis) region, which has attracted a great deal of interest in high-performance optoelectronic devices. However, some practicable applications need a cover of UV–Vis–NIR region for photoelectric conversion, a task that remains a significant challenge for further extending the absorption toward the near-infrared radiation (NIR) region. Here, to the best of our knowledge, we prove for the first time an ultrasensitive flexible broadband photodetector based on porous organolead perovskite-phthalocyanine heterostructure, which combines the synergetic properties of high UV–Vis absorbance of perovskite with enhanced NIR absorption for triclinic lead phthalocyanine. The photosensitivity of the as-prepared devices reaches up to 104 at a low intensity of 10 mW cm−2, which is among the largest values reported for broadband photodetectors. Significantly, performed at room temperature, the device achieves a pA scale dark current along with an ultrafast response speed of less than 0.6 ms for as-adopted full spectra. Our results provide an easy and promising route to develop low-cost, flexible and highly sensitive UV–Vis–NIR photodetectors. Energy efficient and flexible alternative photodetector that detects both visible and invisible light comes closer to real life than ever. A group of researchers from China has developed an organic-inorganic hybrid photodetector that outperforms conventional inorganic like Si and InGaAs-based photodetectors in at least two aspects: broader detection spectral range and much lower dark current. Thanks to the structural flexibility of two hybrid photosensitive materials, methyl-ammonium lead halide and lead phthalocyanine, the team engineered the large area sub-micron thick photodetector with porous structures, which is the key to reducing the standby power consumption by more than 30 times compared to the best InGaAs and Si-based photodetectors. More importantly, the hybrid photodetector needs no additional apparatus or power to cool it for continuous operation, in contrast to the InGaAs photodetector.

41 citations

Journal ArticleDOI
TL;DR: In this article, a broad spectral photodetector based on CH3NH3PbI3−xClx was presented, which has been optimized with four different electrodes and a specially modified highly crystallized active layer.

21 citations

Journal ArticleDOI
TL;DR: In this paper, the photoresponsivity and the maximum photo/dark current ratio (P max) of PbPc transistors were investigated at different substrate temperatures and characterized.

19 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Journal ArticleDOI
TL;DR: A comprehensive overview of the recent progress of perovskite-based photodetectors focusing on versatile compositions, structures, and morphologies of constituent materials, and diverse device architectures toward the superior performance metrics is provided.
Abstract: While the field of perovskite-based optoelectronics has mostly been dominated by photovoltaics, light-emitting diodes, and transistors, semiconducting properties peculiar to perovskites make them interesting candidates for innovative and disruptive applications in light signal detection. Perovskites combine effective light absorption in the broadband range with good photo-generation yield and high charge carrier mobility, a combination that provides promising potential for exploiting sensitive and fast photodetectors that are targeted for image sensing, optical communication, environmental monitoring or chemical/biological detection. Currently, organic–inorganic hybrid and all-inorganic halide perovskites with controlled morphologies of polycrystalline thin films, nano-particles/wires/sheets, and bulk single crystals have shown key figure-of-merit features in terms of their responsivity, detectivity, noise equivalent power, linear dynamic range, and response speed. The sensing region has been covered from ultraviolet-visible-near infrared (UV-Vis-NIR) to gamma photons based on two- or three-terminal device architectures. Diverse photoactive materials and devices with superior optoelectronic performances have stimulated attention from researchers in multidisciplinary areas. In this review, we provide a comprehensive overview of the recent progress of perovskite-based photodetectors focusing on versatile compositions, structures, and morphologies of constituent materials, and diverse device architectures toward the superior performance metrics. Combining the advantages of both organic semiconductors (facile solution processability) and inorganic semiconductors (high charge carrier mobility), perovskites are expected to replace commercial silicon for future photodetection applications.

637 citations

Journal ArticleDOI
TL;DR: In this paper, the authors summarized the recent progress on emerging perovskite photodetectors from the perspective of device physics and materials science and investigated the strategies for extending the spectral response range of PPDs and improving the performance of devices.
Abstract: Perovskite photodetectors (PPDs), which combine the advantages of perovskite semiconductor materials with superior optical and electronic properties and solution-processed manufacturing, have emerged as a new class of revolutionary optoelectronic devices with potential for various practical applications. Encouraged by the development of various solution-synthesis and film-deposition techniques for controlling the morphology and composition of perovskite materials with interesting optoelectronic properties, increasing research attention is focused on the development of high performance PPDs. In this review, the recent progress on emerging PPDs is comprehensively summarized from the perspective of device physics and materials science. The strategies for extending the spectral response range of PPDs and improving the performance of devices are investigated. Furthermore, the methods for realizing narrowband photodetectors are also discussed, where filter-free and self-filter narrowband PPDs are achieved based on the concept of charge collection narrowing. Meanwhile, the promising future directions in this research field are proposed and discussed, including multifunctional PPDs, perovskite–organic hybrid photodetectors, flexible and transparent PPDs, self-powered PPDs, and photodetector systems and arrays. This review provides valuable insights into the current status of highly sensitive PPDs and will spur the design of new structures and devices to further enhance their photo-detection performances and meet the need of versatility in practical application.

323 citations

Journal ArticleDOI
TL;DR: In this article, top-down and bottom-up strategies for the fabrication of GQDs, mainly containing oxidative cleavage, the hydrothermal or solvothermal method, the ultrasonic-assisted or microwave-assisted process, electrochemical oxidation, controllable synthesis, and carbonization from small molecules or polymers, are discussed.
Abstract: Abstract As a new class of fluorescent carbon materials, graphene quantum dots (GQDs) have attracted tremendous attention due to their outstanding properties and potential applications in biological, optoelectronic, and energy-related fields. Herein, top-down and bottom-up strategies for the fabrication of GQDs, mainly containing oxidative cleavage, the hydrothermal or solvothermal method, the ultrasonic-assisted or microwave-assisted process, electrochemical oxidation, controllable synthesis, and carbonization from small molecules or polymers, are discussed. Different methods are presented in order to study their characteristics and their influence on the final properties of the GQDs. The respective advantages and disadvantages of the methods are introduced. With regard to some important or novel methods, the mechanisms are proposed for reference. Moreover, recent exciting progresses on the applications of GQD, such as sensors, bio-imaging, drug carriers, and solar cells are highlighted. Finally, a brief outlook is given, pointing out the issues still to be settled for further development. We believe that new preparation methods and properties of GQDs will be found, and GQDs will play more important roles in novel devices and various applications.

212 citations