The exponential growth and availability of data in all forms is the main booster to the continuing evolution in the communications industry. The popularization of traffic-intensive applications including high definition video, 3-D visualization, augmented reality, wearable devices, and cloud computing defines a new era of mobile communications. The immense amount of traffic generated by today’s customers requires a paradigm shift in all aspects of mobile networks. Ultradense network (UDN) is one of the leading ideas in this racetrack. In UDNs, the access nodes and/or the number of communication links per unit area are densified. In this paper, we provide a survey-style introduction to dense small cell networks. Moreover, we summarize and compare some of the recent achievements and research findings. We discuss the modeling techniques and the performance metrics widely used to model problems in UDN. Also, we present the enabling technologies for network densification in order to understand the state-of-the-art. We consider many research directions in this survey, namely, user association, interference management, energy efficiency, spectrum sharing, resource management, scheduling, backhauling, propagation modeling, and the economics of UDN deployment. Finally, we discuss the challenges and open problems to the researchers in the field or newcomers who aim to conduct research in this interesting and active area of research.

Ultra-Dense Networks: A Survey

We provide a comprehensive overview of mathematical models and analytical techniques for millimeter wave (mmWave) cellular systems. The two fundamental physical differences from conventional sub-6-GHz cellular systems are: 1) vulnerability to blocking and 2) the need for significant directionality at the transmitter and/or receiver, which is achieved through the use of large antenna arrays of small individual elements. We overview and compare models for both of these factors, and present a baseline analytical approach based on stochastic geometry that allows the computation of the statistical distributions of the downlink signal-to-interference-plus-noise ratio (SINR) and also the per link data rate, which depends on the SINR as well as the average load. There are many implications of the models and analysis: 1) mmWave systems are significantly more noise-limited than at sub-6 GHz for most parameter configurations; 2) initial access is much more difficult in mmWave; 3) self-backhauling is more viable than in sub-6-GHz systems, which makes ultra-dense deployments more viable, but this leads to increasingly interference-limited behavior; and 4) in sharp contrast to sub-6-GHz systems cellular operators can mutually benefit by sharing their spectrum licenses despite the uncontrolled interference that results from doing so. We conclude by outlining several important extensions of the baseline model, many of which are promising avenues for future research.

Modeling and Analyzing Millimeter Wave Cellular Systems

Microgrids energy management systems: A critical review on methods, solutions, and prospects

The millimeter wave (mmWave) frequency band spanning from 30 to 300 GHz constitutes a substantial portion of the unused frequency spectrum, which is an important resource for future wireless communication systems in order to fulfill the escalating capacity demand. Given the improvements in integrated components and enhanced power efficiency at high frequencies, wireless systems can operate in the mmWave frequency band. In this paper, we present a survey of the mmWave propagation characteristics, channel modeling, and design guidelines, such as system and antenna design considerations for mmWave, including the link budget of the network, which are essential for mmWave communication systems. We commence by introducing the main channel propagation characteristics of mmWaves followed by channel modeling and design guidelines. Then, we report on the main measurement and modeling campaigns conducted in order to understand the mmWave band’s properties and present the associated channel models. We survey the different channel models focusing on the channel models available for the 28, 38, 60, and 73 GHz frequency bands. Finally, we present the mmWave channel model and its challenges in the context of mmWave communication systems design.

/pdf/millimeter-wave-communications-physical-channel-models-qh94bqmhc1.pdf

Millimeter-Wave Communications: Physical Channel Models, Design Considerations, Antenna Constructions, and Link-Budget

The increasing wireless data traffic demands have driven the need to explore suitable spectrum regions for meeting the projected requirements. In the light of this, millimeter wave (mmWave) communication has received considerable attention from the research community. Typically, in fifth generation (5G) wireless networks, mmWave massive multiple-input multiple-output (MIMO) communications is realized by the hybrid transceivers which combine high dimensional analog phase shifters and power amplifiers with lower-dimensional digital signal processing units. This hybrid beamforming design reduces the cost and power consumption which is aligned with an energy-efficient design vision of 5G. In this paper, we track the progress in hybrid beamforming for massive MIMO communications in the context of system models of the hybrid transceivers’ structures, the digital and analog beamforming matrices with the possible antenna configuration scenarios and the hybrid beamforming in heterogeneous wireless networks. We extend the scope of the discussion by including resource management issues in hybrid beamforming. We explore the suitability of hybrid beamforming methods, both, existing and proposed till first quarter of 2017, and identify the exciting future challenges in this domain.

https://biblio.ugent.be/publication/8585223/file/8585225.pdf

A Survey on Hybrid Beamforming Techniques in 5G: Architecture and System Model Perspectives

In this paper, we study the achievable rate and the energy efficiency of analog, hybrid, and digital combining (AC, HC, and DC) for millimeter wave (mmW) receivers. We take into account the power consumption of all receiver components, not just analog-to-digital converters (ADCs), determine some practical limitations of beamforming in each architecture, and develop performance analysis charts that enable comparison of different receivers simultaneously in terms of two metrics, namely, spectral efficiency (SE) and energy efficiency (EE). We present a multi-objective utility optimization interpretation to find the best SE-EE weighted tradeoff among AC, DC, and HC schemes. We consider an additive quantization noise model to evaluate the achievable rates with low resolution ADCs. Our analysis shows that AC is only advantageous if the channel rank is strictly one, the link has very low SNR, or there is a very stringent low power constraint at the receiver. Otherwise, we show that the usual claim that DC requires the highest power is not universally valid. Rather, either DC or HC alternatively results in the better SE versus EE tradeoff depending strongly on the considered power consumption characteristic values for each component of the mmW receiver.

Millimeter Wave Receiver Efficiency: A Comprehensive Comparison of Beamforming Schemes With Low Resolution ADCs

Diversity, i.e. transmitting multiple replicas of a signal, may mitigate fading in wireless networks. Among other diversity techniques, the space diversity of multi-antenna systems is particularly interesting since it can complement other forms of diversity. The recent cooperative diversity paradigm brings the advantages of multi-antenna space diversity to single antenna networked devices, which, through cooperation and antenna sharing, form virtual antenna arrays. However, cooperative diversity is a complex technique and research on this topic is still in its early stages. This paper aims at providing a general survey on the theoretical framework; and the physical and medium access control proposals in the literature.

A Survey on Cooperative Diversity for Wireless Networks

With the shortage of spectrum in conventional cellular frequencies, millimeter-wave (mmWave) bands are being widely considered for use in next-generation networks. Multihop relaying is likely to play a significant role in mmWave cellular systems for self backhauling, range extension and improved robustness from path diversity. However, designing scheduling policies for these systems is challenging due to the need to account for both adaptive directional transmissions and dynamic time-division duplexing schedules, which are key enabling features of mmWave systems. This paper considers the problem of joint scheduling and congestion control in a multihop mmWave network using a Network Utility Maximization (NUM) framework. Interference is modeled with an exact model and two auxiliar simplified models: actual interference (AI), with a graph-based calculation of the Signal to Interference plus Noise Ratio (SINR) depending on dynamic link activity and directivity, as well as upper and lower bounds computed from worst-case interference (WI) and interference free (IF) approximations. Throughput and utility optimal policies are derived for all interference models (AI, WI and IF) with both deterministic Maximum Weighted and randomized Pick and Compare scheduling algorithms, jointly with decentralized Dual Congestion Control. Results are evaluated with numerical simulations, using accurate mmWave channel and beamforming gain approximations based on measurement campaigns.

On the Analysis of Scheduling in Dynamic Duplex Multihop mmWave Cellular Systems

With millimeter wave bands emerging as a strong candidate for 5G cellular networks, next-generation systems may be in a unique position where spectrum is plentiful. To assess the potential value of this spectrum, this paper derives scaling laws on the per mobile downlink feasible rate with large bandwidth and number of nodes, for both Infrastructure Single Hop (ISH) and Infrastructure Multi-Hop (IMH) architectures. It is shown that, for both cases, there exist \emph{critical bandwidth scalings} above which increasing the bandwidth no longer increases the feasible rate per node. These critical thresholds coincide exactly with the bandwidths where, for each architecture, the network transitions from being degrees-of-freedom-limited to power-limited. For ISH, this critical bandwidth threshold is lower than IMH when the number of users per base station grows with network size. This result suggests that multi-hop transmissions may be necessary to fully exploit large bandwidth degrees of freedom in deployments with growing number of users per cell.

Scaling laws for Infrastructure Single and multihop wireless networks in wideband regimes

This paper addresses the modeling of specific Smart Grid (SG) communication requirements from a data networking research perspective, as a general approach to the study of different access technologies suitable for the last mile (LM). SGLM networks serve customers' Energy Services Interfaces. From functional descriptions of SG, a traffic model is developed. It is then applied to the study of an access architecture based on leased lines from local broadband access providers. This permits consideration of the potential starvation of domestic traffic, which is avoided by applying well-known traffic management techniques. From previous results obtained for a purpose-built WiMAX SGLM network, the intuition that a leased broadband access yields lower latencies is verified. In general, the proposed traffic model simplifies the design of benchmarks for the comparison of candidate access technologies.

Felipe Gomez-Cuba

Papers

Millimeter Wave Receiver Efficiency: A Comprehensive Comparison of Beamforming Schemes With Low Resolution ADCs

A Survey on Cooperative Diversity for Wireless Networks

On the Analysis of Scheduling in Dynamic Duplex Multihop mmWave Cellular Systems

Scaling laws for Infrastructure Single and multihop wireless networks in wideband regimes

Smart Grid Last-Mile Communications Model and Its Application to the Study of Leased Broadband Wired-Access