Feng Lan

Bio: Feng Lan is an academic researcher from University of Electronic Science and Technology of China. The author has contributed to research in topics: Terahertz radiation & Metamaterial. The author has an hindex of 10, co-authored 67 publications receiving 451 citations. Previous affiliations of Feng Lan include University of Michigan.

Properties of obliquely incident electromagnetic wave in one-dimensional magnetized plasma photonic crystals

Abstract: Properties of obliquely incident electromagnetic wave in one-dimensional (1D) magnetized plasma photonic crystals (PPCs) are studied in this paper. Based on the continuous boundary condition of electromagnetic wave in 1D PPC, transfer matrix equation and dispersion equation of transverse magnetic polarization are deduced, and the properties of dispersion and transmission relation in terms of external magnetic field, collision frequency, and dielectric constant of dielectric and incident angles are investigated, respectively. Results show that gap location and gap width can be effectively controlled by adjusting external magnetic field as well as incident angle, and increasing collision frequency has little effect on gap width while larger dielectric constant of dielectric leads to more gaps.

Large phase modulation of THz wave via an enhanced resonant active HEMT metasurface

Abstract: Abstract Terahertz (THz) science and technology promise unique applications in high-speed communications, high-accuracy imaging, and so on. To keep up with the demand for THz systems, THz dynamic devices should feature large phase shift modulation and high speed. To date, however, only a few devices can efficiently manipulate the phase of THz waves. In this paper, we demonstrate that efficient phase modulation of THz waves can be addressed by an active and enhanced resonant metamaterial embedded with a nanostructured 2D electron gas (2DEG) layer of a GaN high electron mobility transistor (HEMT). The enhanced resonant metaunit couples the traditional dipolar and inductance-capacitance resonances together to realize a coupling mode with enhanced resonance. Embedded with the nanostructured 2DEG layer of GaN HEMT, the resonance intensity and surface current circuit of the enhanced resonant mode in the metamaterial unit can be dynamically manipulated by the electrical control of the carrier distribution and depletion of the 3 nm 2DEG, leading to a phase shift greater than 150° in simulation. In the dynamic experiments, a 137° phase shift was achieved with an external controlling voltage of only several volts in the THz transmission mode. This work represents the first realization of a phase shift greater than 100° in a dynamic experiment in transmission mode using an active metamaterial structure with only a single layer. In addition, given the high-speed modulation ability of the HEMT, this concept provides a promising approach for the development of a fast and effective phase modulator in THz application systems.

High-Speed Efficient Terahertz Modulation Based on Tunable Collective-Individual State Conversion within an Active 3 nm Two-Dimensional Electron Gas Metasurface.

Abstract: Terahertz (THz) modulators are always realized by dynamically manipulating the conversion between different resonant modes within a single unit cell of an active metasurface. In this Letter, to ach...

Terahertz dual-resonance bandpass filter using bilayer reformative complementary metamaterial structures.

Abstract: A dual-resonance frequency selective surface filter in the THz range that uses bilayer modified complementary metamaterial structures is proposed in this Letter. The bandpass filter, with dual bands centered at 0.315 and 0.48 THz, uses a single crystal quartz substrate and is simulated, fabricated, and measured. To minimize the manufacturing risks of working with fragile and thin quartz substrates, efforts have been made to improve the transmission frequency response features at realizable substrate thicknesses. Experimental results from 0.1 to 0.6 THz measured by THz time-domain spectroscopy show excellent agreement with the simulation results.

Dual-band refractometric terahertz biosensing with intense wave-matter-overlap microfluidic channel

Abstract: We theoretically and experimentally demonstrate a label-free terahertz biosensor with ultrahigh sensitivity and distinctive discretion. By constructing a metal-air-metal (MAM) metamaterial perfect absorber (MPA) with a metallic paired-ring resonator array, a hollow microfluidic channel, and a backed reflector, a novel dual-band absorptive sensing platform is proposed in the THz range. The near field coupling by dipole-induced trapped modes and the magnetic momentum caused a vertical to transverse power flux that dramatically enhanced the electromagnetic field on top of the metasurface and in the microfluidic channel, respectively. Both the resonant modes exhibit perfect absorption and produce ultrahigh normalized sensitivities of 0.47/RIU (refractive index unit, RIU) and 0.51/RIU at 0.76 THz and 1.28 THz, respectively. Compared with conventional microfluidic sensors, the salient advantages of our design are the perfect spatial overlap for light-matter interaction and polarization insensitivity. Characterized by THz time domain spectroscopic absorption quantification measurements with different concentrations of bovine serum albumin (BSA), the proposed sensor exhibits promising applications in microfluidic biosensing.

Optical excitations in electron microscopy

Abstract: This review discusses how low-energy, valence excitations created by swift electrons can render information on the optical response of structured materials with unmatched spatial resolution. Electron microscopes are capable of focusing electron beams on sub-nanometer spots and probing the target response either by analyzing electron energy losses or by detecting emitted radiation. Theoretical frameworks suited to calculate the probability of energy loss and light emission (cathodoluminescence) are revisited and compared with experimental results. More precisely, a quantum-mechanical description of the interaction between the electrons and the sample is discussed, followed by a powerful classical dielectric approach that can be in practice applied to more complex systems. We assess the conditions under which classical and quantum-mechanical formulations are equivalent. The excitation of collective modes such as plasmons is studied in bulk materials, planar surfaces, and nanoparticles. Light emission induced by the electrons is shown to constitute an excellent probe of plasmons, combining sub-nanometer resolution in the position of the electron beam with nanometer resolution in the emitted wavelength. Both electron energy-loss and cathodoluminescence spectroscopies performed in a scanning mode of operation yield snap shots of plasmon modes in nanostructures with fine spatial detail as compared to other existing imaging techniques, thus providing an ideal tool for nanophotonics studies.

The 2016 terahertz science and technology roadmap

Abstract: Science and technologies based on terahertz frequency electromagnetic radiation (100 GHz–30 THz) have developed rapidly over the last 30 years. For most of the 20th Century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to 'real world' applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2017, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 18 sections that cover most of the key areas of THz science and technology. We hope that The 2017 Roadmap on THz science and technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies.

Plasmas as metamaterials: a review

Abstract: When we form a structure of plasmas distributed in a certain space in which electromagnetic waves propagate, such a plasma structure serves as a different medium from a homogeneous bulk plasma. We can also enhance or generate novel functions of the plasmas when we add other structural materials such as functional components. That is to say, when we estimate such a medium from the material properties such as permittivity, permeability and conductivity, it shows extraordinary and/or functional effects that arise from the synthesis of the structure. We call such an artificial material a plasma metamaterial. In this review, starting from a fundamental understanding of electromagnetic wave propagation in and around plasmas, we review the new functions of plasmas as metamaterials, including a photonic-crystal-like behavior, a negative refractive index state and a nonlinear bifurcated electric response, by describing specific plasma structures. In addition, we survey some specific applications of such media and predict a feasible scientific expansion of this field in the near future.

Highly Sensitive Terahertz Metamaterial Sensor

Abstract: A novel design of nearly perfect metamaterial absorber is proposed and analyzed for terahertz sensing applications. The full vectorial finite element method is used to simulate and analyze the reported design. The suggested structure is based on increasing the confinement of both electric and magnetic fields simultaneously at the resonance frequency. Therefore, an absorptivity of 0.99 is achieved at 2.249 THz with a narrow resonant peak and a $Q$ -factor of 22.05. The resonance frequency is sensitive to the surrounding medium refractive index at fixed analyte thickness. Consequently, the reported metamaterial design can be used as a refractive index (RI) sensor with the high sensitivity of 300 GHz/RIU and the figure of merit (FoM) of 2.94 through an RI range from 1.0 to 1.39 at the analyte thickness of $1.0~ \mu \text{m}$ . Furthermore, the proposed sensor has a sensitivity of 23.7 GHz/ $\mu \text{m}$ for the detection of the sensing layer thickness variation at the fixed analyte RI of 1.35. It is worth noting that most of the biomedical samples have a refractive index range from 1.3 to 1.39. Therefore, the reported sensor can be used for biomedical applications with high sensitivity.

A wireless communication scheme based on space- and frequency-division multiplexing using digital metasurfaces

Abstract: Digitally programmable metasurfaces are of potential use in wireless multiplexing techniques because they can encode and transmit information without using traditional radio-frequency components such as antennas or mixers. Space–time-coding digital metasurfaces can, in particular, manipulate the propagation direction and harmonic power distribution of electromagnetic waves, making them suitable for space- and frequency-division multiplexing. However, while digital metasurfaces have been used for wireless communication, these systems could implement signal modulation only in the time domain. Here, we report a wireless communication scheme that uses space–time-coding digital metasurfaces to implement both space- and frequency-division multiplexing. By encoding space–time-coding matrices through multiple channels, digital messages can be directly transmitted to different users at different locations simultaneously, without the need for digital-to-analogue conversion and mixing processes. To illustrate this approach, we have built a dual-channel wireless communication system based on a two-bit space–time-coding digital metasurface and use it to transmit two different pictures to two users simultaneously in real time. Space–time-coding digital metasurfaces can be used to implement secure and low-cost space- and frequency-division multiplexing in a dual-channel wireless communication system.