FengChao Wang

Bio: FengChao Wang is an academic researcher from University of Science and Technology of China. The author has contributed to research in topics: Graphene & Ion. The author has an hindex of 36, co-authored 111 publications receiving 7246 citations. Previous affiliations of FengChao Wang include Chinese Academy of Sciences & University of Manchester.

Precise and Ultrafast Molecular Sieving Through Graphene Oxide Membranes

Abstract: Graphene-based materials can have well-defined nanometer pores and can exhibit low frictional water flow inside them, making their properties of interest for filtration and separation. We investigate permeation through micrometer-thick laminates prepared by means of vacuum filtration of graphene oxide suspensions. The laminates are vacuum-tight in the dry state but, if immersed in water, act as molecular sieves, blocking all solutes with hydrated radii larger than 4.5 angstroms. Smaller ions permeate through the membranes at rates thousands of times faster than what is expected for simple diffusion. We believe that this behavior is caused by a network of nanocapillaries that open up in the hydrated state and accept only species that fit in. The anomalously fast permeation is attributed to a capillary-like high pressure acting on ions inside graphene capillaries.

Proton transport through one-atom-thick crystals

Abstract: Measurements show that monolayers of graphene and hexagonal boron nitride are unexpectedly highly permeable to thermal protons and that their conductivity rapidly increases with temperature, but that no proton transport is detected for few-layer crystals. A perfect graphene sheet is impermeable to all atoms and molecules: even hydrogen, the smallest of atoms, is not expected to penetrate through graphene's dense electronic cloud within billions of years. This characteristic is thought to extend to other two-dimensional crystals such as hexagonal boron nitride and molybdenum disulphide. Sheng Hu and colleagues now show that, surprisingly, monolayers of graphene and hexagonal boron nitride (but not molybdenum disulphide) are highly permeable to protons. In combination with their stability, this establishes these monolayers as promising candidates for use in many hydrogen-based technologies. Graphene is increasingly explored as a possible platform for developing novel separation technologies1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19. This interest has arisen because it is a maximally thin membrane that, once perforated with atomic accuracy, may allow ultrafast and highly selective sieving of gases, liquids, dissolved ions and other species of interest2,9,10,11,12,13,14,15,16,17,18,19. However, a perfect graphene monolayer is impermeable to all atoms and molecules under ambient conditions1,2,3,4,5,6,7: even hydrogen, the smallest of atoms, is expected to take billions of years to penetrate graphene’s dense electronic cloud3,4,5,6. Only accelerated atoms possess the kinetic energy required to do this20,21. The same behaviour might reasonably be expected in the case of other atomically thin crystals22,23. Here we report transport and mass spectroscopy measurements which establish that monolayers of graphene and hexagonal boron nitride (hBN) are highly permeable to thermal protons under ambient conditions, whereas no proton transport is detected for thicker crystals such as monolayer molybdenum disulphide, bilayer graphene or multilayer hBN. Protons present an intermediate case between electrons (which can tunnel easily through atomically thin barriers24) and atoms, yet our measured transport rates are unexpectedly high4,5 and raise fundamental questions about the details of the transport process. We see the highest room-temperature proton conductivity with monolayer hBN, for which we measure a resistivity to proton flow of about 10 Ω cm2 and a low activation energy of about 0.3 electronvolts. At higher temperatures, hBN is outperformed by graphene, the resistivity of which is estimated to fall below 10−3 Ω cm2 above 250 degrees Celsius. Proton transport can be further enhanced by decorating the graphene and hBN membranes with catalytic metal nanoparticles. The high, selective proton conductivity and stability make one-atom-thick crystals promising candidates for use in many hydrogen-based technologies.

Square ice in graphene nanocapillaries

Abstract: Bulk water exists in many forms, including liquid, vapour and numerous crystalline and amorphous phases of ice, with hexagonal ice being responsible for the fascinating variety of snowflakes Much less noticeable but equally ubiquitous is water adsorbed at interfaces and confined in microscopic pores Such low-dimensional water determines aspects of various phenomena in materials science, geology, biology, tribology and nanotechnology Theory suggests many possible phases for adsorbed and confined water, but it has proved challenging to assess its crystal structure experimentally Here we report high-resolution electron microscopy imaging of water locked between two graphene sheets, an archetypal example of hydrophobic confinement The observations show that the nanoconfined water at room temperature forms 'square ice'--a phase having symmetry qualitatively different from the conventional tetrahedral geometry of hydrogen bonding between water molecules Square ice has a high packing density with a lattice constant of 283 A and can assemble in bilayer and trilayer crystallites Molecular dynamics simulations indicate that square ice should be present inside hydrophobic nanochannels independently of their exact atomic nature

Ultrathin graphene-based membrane with precise molecular sieving and ultrafast solvent permeation

Abstract: Highly laminar graphene oxide flakes (10 to 20 μm in diameter) are fabricated. Reducing flake thickness to 10 nm enables water and organic solvent permeation, enabling the flakes to act as a highly effective organic solvent membrane. Graphene oxide (GO) membranes continue to attract intense interest due to their unique molecular sieving properties combined with fast permeation1,2,3,4,5,6,7,8,9. However, their use is limited to aqueous solutions because GO membranes appear impermeable to organic solvents1, a phenomenon not yet fully understood. Here, we report efficient and fast filtration of organic solutions through GO laminates containing smooth two-dimensional (2D) capillaries made from large (10–20 μm) flakes. Without modification of sieving characteristics, these membranes can be made exceptionally thin, down to ∼10 nm, which translates into fast water and organic solvent permeation. We attribute organic solvent permeation and sieving properties to randomly distributed pinholes interconnected by short graphene channels with a width of 1 nm. With increasing membrane thickness, organic solvent permeation rates decay exponentially but water continues to permeate quickly, in agreement with previous reports1,2,3,4. The potential of ultrathin GO laminates for organic solvent nanofiltration is demonstrated by showing >99.9% rejection of small molecular weight organic dyes dissolved in methanol. Our work significantly expands possibilities for the use of GO membranes in purification and filtration technologies.

Molecular transport through capillaries made with atomic-scale precision

Abstract: Nanometre-scale graphitic capillaries with atomically flat walls are engineered and studied, revealing unexpectedly fast transport of liquid water through channels that accommodate only a few layers of water. Artificial nanometre-sized capillaries have enabled new research and led to the emergence of nanofluidics, but surface roughness in particular makes it very challenging to exactly control their dimensions. Andre Geim and colleagues now show that van der Waals assembly can produce narrow and smooth capillaries that have atomically flat top and bottom graphite sheets, separated by spacers made from a precisely controlled number of graphene layers. Water transport through the channels, which range in height from a single atomic plane to dozens of them, is unexpectedly fast and speeds up further in channels that accommodate only a few layers of water. The fabrication method is expected to give access to a wide range of capillaries with atomically precise sizes, and with permeation properties that are tunable by the choice of two-dimensional material used for creating the channel walls. Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications1. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics2,3,4. But surface roughness in particular makes it challenging to produce capillaries with precisely controlled dimensions at this spatial scale. Here we report the fabrication of narrow and smooth capillaries through van der Waals assembly5, with atomically flat sheets at the top and bottom separated by spacers made of two-dimensional crystals6 with a precisely controlled number of layers. We use graphene and its multilayers as archetypal two-dimensional materials to demonstrate this technology, which produces structures that can be viewed as if individual atomic planes had been removed from a bulk crystal to leave behind flat voids of a height chosen with atomic-scale precision. Water transport through the channels, ranging in height from one to several dozen atomic planes, is characterized by unexpectedly fast flow (up to 1 metre per second) that we attribute to high capillary pressures (about 1,000 bar) and large slip lengths. For channels that accommodate only a few layers of water, the flow exhibits a marked enhancement that we associate with an increased structural order in nanoconfined water. Our work opens up an avenue to making capillaries and cavities with sizes tunable to angstrom precision, and with permeation properties further controlled through a wide choice of atomically flat materials available for channel walls.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage

Abstract: Graphene and related two-dimensional crystals and hybrid systems showcase several key properties that can address emerging energy needs, in particular for the ever growing market of portable and wearable energy conversion and storage devices. Graphene's flexibility, large surface area, and chemical stability, combined with its excellent electrical and thermal conductivity, make it promising as a catalyst in fuel and dye-sensitized solar cells. Chemically functionalized graphene can also improve storage and diffusion of ionic species and electric charge in batteries and supercapacitors. Two-dimensional crystals provide optoelectronic and photocatalytic properties complementing those of graphene, enabling the realization of ultrathin-film photovoltaic devices or systems for hydrogen production. Here, we review the use of graphene and related materials for energy conversion and storage, outlining the roadmap for future applications.

Materials for next-generation desalination and water purification membranes

Abstract: Membranes have an increasingly important role in alleviating water scarcity and the pollution of aquatic environments. Promising molecular-level design approaches are reviewed for membrane materials, focusing on how these materials address the urgent requirements of water treatment applications.

Maximizing the right stuff: The trade-off between membrane permeability and selectivity

Abstract: BACKGROUND Synthetic membranes are used for desalination, dialysis, sterile filtration, food processing, dehydration of air and other industrial, medical, and environmental applications due to low energy requirements, compact design, and mechanical simplicity. New applications are emerging from the water-energy nexus, shale gas extraction, and environmental needs such as carbon capture. All membranes exhibit a trade-off between permeability—i.e., how fast molecules pass through a membrane material—and selectivity—i.e., to what extent the desired molecules are separated from the rest. However, biological membranes such as aquaporins and ion channels are both highly permeable and highly selective. Separation based on size difference is common, but there are other ways to either block one component or enhance transport of another through a membrane. Based on increasing molecular understanding of both biological and synthetic membranes, key design criteria for new membranes have emerged: (i) properly sized free-volume elements (or pores), (ii) narrow free-volume element (or pore size) distribution, (iii) a thin active layer, and (iv) highly tuned interactions between permeants of interest and the membrane. Here, we discuss the permeability/selectivity trade-off, highlight similarities and differences between synthetic and biological membranes, describe challenges for existing membranes, and identify fruitful areas of future research. ADVANCES Many organic, inorganic, and hybrid materials have emerged as potential membranes. In addition to polymers, used for most membranes today, materials such as carbon molecular sieves, ceramics, zeolites, various nanomaterials (e.g., graphene, graphene oxide, and metal organic frameworks), and their mixtures with polymers have been explored. Simultaneously, global challenges such as climate change and rapid population growth stimulate the search for efficient water purification and energy-generation technologies, many of which are membrane-based. Additional driving forces include wastewater reuse from shale gas extraction and improvement of chemical and petrochemical separation processes by increasing the use of light hydrocarbons for chemicals manufacturing. OUTLOOK Opportunities for advancing membranes include (i) more mechanically, chemically, and thermally robust materials; (ii) judiciously higher permeability and selectivity for applications where such improvements matter; and (iii) more emphasis on fundamental structure/property/processing relations. There is a pressing need for membranes with improved selectivity, rather than membranes with improved permeability, especially for water purification. Modeling at all length scales is needed to develop a coherent molecular understanding of membrane properties, provide insight for future materials design, and clarify the fundamental basis for trade-off behavior. Basic molecular-level understanding of thermodynamic and diffusion properties of water and ions in charged membranes for desalination and energy applications such as fuel cells is largely incomplete. Fundamental understanding of membrane structure optimization to control transport of minor species (e.g., trace-organic contaminants in desalination membranes, neutral compounds in charged membranes, and heavy hydrocarbons in membranes for natural gas separation) is needed. Laboratory evaluation of membranes is often conducted with highly idealized mixtures, so separation performance in real applications with complex mixtures is poorly understood. Lack of systematic understanding of methodologies to scale promising membranes from the few square centimeters needed for laboratory studies to the thousands of square meters needed for large applications stymies membrane deployment. Nevertheless, opportunities for membranes in both existing and emerging applications, together with an expanding set of membrane materials, hold great promise for membranes to effectively address separations needs.