scispace - formally typeset
Search or ask a question
Author

Fengnian Xia

Bio: Fengnian Xia is an academic researcher from Yale University. The author has contributed to research in topics: Graphene & Photonics. The author has an hindex of 73, co-authored 237 publications receiving 35030 citations. Previous affiliations of Fengnian Xia include GlobalFoundries & Polytechnic University of Milan.


Papers
More filters
Journal ArticleDOI
TL;DR: Black phosphorus (BP), the most stable allotrope of phosphorus with strong intrinsic in-plane anisotropy, is reintroduced to the layered-material family and shows great potential for thin-film electronics, infrared optoelectronics and novel devices in which anisotropic properties are desirable.
Abstract: The applications of graphene and transition metal dichalcogenides in electronics are limited by their zero-bandgap and low mobility, respectively. Here, the authors demonstrate the potential of an emerging layered material—black phosphorous—for thin film electronics and infrared optoelectronics.

2,983 citations

Journal ArticleDOI
Fengnian Xia1, Thomas Mueller1, Yu-Ming Lin1, Alberto Valdes-Garcia1, Phaedon Avouris1 
TL;DR: This work demonstrates ultrafast transistor-based photodetectors made from single- and few-layer graphene that do not degrade for optical intensity modulations up to 40 GHz and suggests that the intrinsic bandwidth may exceed 500 GHz.
Abstract: Graphene research so far has focused on electronic rather than photonic applications, in spite of its impressive optical properties. These include its ability to absorb approximately 2% of incident light over a broad wavelength range despite being just one atom thick. Here, we demonstrate ultrafast transistor-based photodetectors made from single- and few-layer graphene. The photoresponse does not degrade for optical intensity modulations up to 40 GHz, and further analysis suggests that the intrinsic bandwidth may exceed 500 GHz. The generation and transport of photocarriers in graphene differ fundamentally from those in photodetectors made from conventional semiconductors as a result of the unique photonic and electronic properties of the graphene. This leads to a remarkably high bandwidth, zero source-drain bias and dark current operation, and good internal quantum efficiency.

2,840 citations

Journal ArticleDOI
TL;DR: In this article, the optical properties and applications of various two-dimensional materials including transition metal dichalcogenides are reviewed with an emphasis on nanophotonic applications, and two different approaches for enhancing their interactions with light: through their integration with external photonic structures, and through intrinsic polaritonic resonances.
Abstract: The optical properties of graphene and emerging two-dimensional materials including transition metal dichalcogenides are reviewed with an emphasis on nanophotonic applications. Two-dimensional materials exhibit diverse electronic properties, ranging from insulating hexagonal boron nitride and semiconducting transition metal dichalcogenides such as molybdenum disulphide, to semimetallic graphene. In this Review, we first discuss the optical properties and applications of various two-dimensional materials, and then cover two different approaches for enhancing their interactions with light: through their integration with external photonic structures, and through intrinsic polaritonic resonances. Finally, we present a narrow-bandgap layered material — black phosphorus — that serendipitously bridges the energy gap between the zero-bandgap graphene and the relatively large-bandgap transition metal dichalcogenides. The plethora of two-dimensional materials and their heterostructures, together with the array of available approaches for enhancing the light–matter interaction, offers the promise of scientific discoveries and nanophotonics technologies across a wide range of the electromagnetic spectrum.

2,414 citations

Journal ArticleDOI
TL;DR: In this paper, an asymmetric metallization scheme is adopted to break the mirror symmetry of the internal electric-field profile in conventional graphene field effect transistor channels, allowing for efficient photodetection.
Abstract: Although silicon has dominated solid-state electronics for more than four decades, a variety of other materials are used in photonic devices to expand the wavelength range of operation and improve performance. For example, gallium-nitride based materials enable light emission at blue and ultraviolet wavelengths1, and high index contrast silicon-on-insulator facilitates ultradense photonic devices2,3. Here, we report the first use of a photodetector based on graphene4,5, a two-dimensional carbon material, in a 10 Gbit s−1 optical data link. In this interdigitated metal–graphene–metal photodetector, an asymmetric metallization scheme is adopted to break the mirror symmetry of the internal electric-field profile in conventional graphene field-effect transistor channels6,7,8,9, allowing for efficient photodetection. A maximum external photoresponsivity of 6.1 mA W−1 is achieved at a wavelength of 1.55 µm. Owing to the unique band structure of graphene10,11 and extensive developments in graphene electronics12,13 and wafer-scale synthesis13, graphene-based integrated electronic–photonic circuits with an operational wavelength range spanning 300 nm to 6 µm (and possibly beyond) can be expected in the future. A graphene-based photodetector with unprecedented photoresponsivity and the ability to perform error-free detection of 10 Gbit s−1s data streams is demonstrated. The results suggest that graphene-based photonic devices have a bright future in telecommunications and other optical applications.

2,238 citations

Journal ArticleDOI
24 Nov 2015-ACS Nano
TL;DR: Insight is provided into the theoretical modeling and understanding of the van der Waals forces that hold together the 2D layers in bulk solids, as well as their excitonic properties and growth morphologies.
Abstract: The isolation of graphene in 2004 from graphite was a defining moment for the “birth” of a field: two-dimensional (2D) materials In recent years, there has been a rapidly increasing number of papers focusing on non-graphene layered materials, including transition-metal dichalcogenides (TMDs), because of the new properties and applications that emerge upon 2D confinement Here, we review significant recent advances and important new developments in 2D materials “beyond graphene” We provide insight into the theoretical modeling and understanding of the van der Waals (vdW) forces that hold together the 2D layers in bulk solids, as well as their excitonic properties and growth morphologies Additionally, we highlight recent breakthroughs in TMD synthesis and characterization and discuss the newest families of 2D materials, including monoelement 2D materials (ie, silicene, phosphorene, etc) and transition metal carbide- and carbon nitride-based MXenes We then discuss the doping and functionalization of 2

2,036 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: This work reviews the historical development of Transition metal dichalcogenides, methods for preparing atomically thin layers, their electronic and optical properties, and prospects for future advances in electronics and optoelectronics.
Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.

13,348 citations

Journal ArticleDOI
TL;DR: Because monolayer MoS(2) has a direct bandgap, it can be used to construct interband tunnel FETs, which offer lower power consumption than classical transistors, and could also complement graphene in applications that require thin transparent semiconductors, such as optoelectronics and energy harvesting.
Abstract: Two-dimensional materials are attractive for use in next-generation nanoelectronic devices because, compared to one-dimensional materials, it is relatively easy to fabricate complex structures from them. The most widely studied two-dimensional material is graphene, both because of its rich physics and its high mobility. However, pristine graphene does not have a bandgap, a property that is essential for many applications, including transistors. Engineering a graphene bandgap increases fabrication complexity and either reduces mobilities to the level of strained silicon films or requires high voltages. Although single layers of MoS(2) have a large intrinsic bandgap of 1.8 eV (ref. 16), previously reported mobilities in the 0.5-3 cm(2) V(-1) s(-1) range are too low for practical devices. Here, we use a halfnium oxide gate dielectric to demonstrate a room-temperature single-layer MoS(2) mobility of at least 200 cm(2) V(-1) s(-1), similar to that of graphene nanoribbons, and demonstrate transistors with room-temperature current on/off ratios of 1 × 10(8) and ultralow standby power dissipation. Because monolayer MoS(2) has a direct bandgap, it can be used to construct interband tunnel FETs, which offer lower power consumption than classical transistors. Monolayer MoS(2) could also complement graphene in applications that require thin transparent semiconductors, such as optoelectronics and energy harvesting.

12,477 citations

Journal ArticleDOI
TL;DR: An overview of the synthesis, properties, and applications of graphene and related materials (primarily, graphite oxide and its colloidal suspensions and materials made from them), from a materials science perspective.
Abstract: There is intense interest in graphene in fields such as physics, chemistry, and materials science, among others. Interest in graphene's exceptional physical properties, chemical tunability, and potential for applications has generated thousands of publications and an accelerating pace of research, making review of such research timely. Here is an overview of the synthesis, properties, and applications of graphene and related materials (primarily, graphite oxide and its colloidal suspensions and materials made from them), from a materials science perspective.

8,919 citations

Journal ArticleDOI
11 Oct 2012-Nature
TL;DR: This work reviews recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

7,987 citations