Florian Hischen

Bio: Florian Hischen is an academic researcher from Johannes Kepler University of Linz. The author has contributed to research in topics: Fluid transport & Surface roughness. The author has an hindex of 10, co-authored 16 publications receiving 403 citations. Previous affiliations of Florian Hischen include RWTH Aachen University.

Moisture harvesting and water transport through specialized micro-structures on the integument of lizards.

Abstract: Several lizard species that live in arid areas have developed special abilities to collect water with their bodies' surfaces and to ingest the so collected moisture. This is called rain- or moisture-harvesting. The water can originate from air humidity, fog, dew, rain or even from humid soil. The integument (i.e., the skin plus skin derivatives such as scales) has developed features so that the water spreads and is soaked into a capillary system in between the reptiles' scales. Within this capillary system the water is transported to the mouth where it is ingested. We have investigated three different lizard species which have developed the ability for moisture harvesting independently, viz. the Australian thorny devil (Moloch horridus), the Arabian toadhead agama (Phrynocephalus arabicus) and the Texas horned lizard (Phrynosoma cornutum). All three lizards have a honeycomb like micro ornamentation on the outer surface of the scales and a complex capillary system in between the scales. By investigation of individual scales and by producing and characterising polymer replicas of the reptiles' integuments, we found that the honeycomb like structures render the surface superhydrophilic, most likely by holding a water film physically stable. Furthermore, the condensation of air humidity is improved on this surface by about 100% in comparison to unstructured surfaces. This allows the animals to collect moisture with their entire body surface. The collected water is transported into the capillary system. For Phrynosoma cornutum we found the interesting effect that, in contrast to the other two investigated species, the water flow in the capillary system is not uniform but directed to the mouth. Taken together we found that the micro ornamentation yields a superhydrophilic surface, and the semi-tubular capillaries allow for an efficient passive - and for Phrynosoma directed - transport of water.

Slippery surfaces of pitcher plants: Nepenthes wax crystals minimize insect attachment via microscopic surface roughness

Abstract: Pitcher plants of the genus Nepenthes efficiently trap and retain insect prey in highly specialized leaves. Besides a slippery peristome which inhibits adhesion of insects they employ epicuticular wax crystals on the inner walls of the conductive zone of the pitchers to hamper insect attachment by adhesive devices. It has been proposed that the detachment of individual crystals and the resulting contamination of adhesive organs is responsible for capturing insects. However, our results provide evidence in favour of a different mechanism, mainly based on the stability and the roughness of the waxy surface. First, we were unable to detect a large quantity of crystal fragments on the pads of insects detached from mature pitcher surfaces of Nepenthes alata . Second, investigation of the pitcher surface by focused ion beam treatment showed that the wax crystals form a compact 3D structure. Third, atomic force microscopy of the platelet-shaped crystals revealed that the crystals are mechanically stable, rendering crystal detachment by insect pads unlikely. Fourth, the surface profile parameters of the wax layer showed striking similarities to those of polishing paper with low grain size. By measuring friction forces of insects on this artificial surface we demonstrate that microscopic roughness alone is sufficient to minimize insect attachment. A theoretical model shows that surface roughness within a certain length scale will prevent adhesion by being too rough for adhesive pads but not rough enough for claws.

Mimicking bug-like surface structures and their fluid transport produced by ultrashort laser pulse irradiation of steel

Abstract: Ultrashort laser pulses with durations in the fs-to-ps range were used for large area surface processing of steel aimed at mimicking the morphology and extraordinary wetting behaviour of bark bugs (Aradidae) found in nature. The processing was performed by scanning the laser beam over the surface of polished flat sample surfaces. A systematic variation of the laser processing parameters (peak fluence and effective number of pulses per spot diameter) allowed the identification of different regimes associated with characteristic surface morphologies (laser-induced periodic surface structures, i.e., LIPSS, grooves, spikes, etc.). Moreover, different laser processing strategies, varying laser wavelength, pulse duration, angle of incidence, irradiation atmosphere, and repetition rates, allowed to achieve a range of morphologies that resemble specific structures found on bark bugs. For identifying the ideal combination of parameters for mimicking bug-like structures, the surfaces were inspected by scanning electron microscopy. In particular, tilted micrometre-sized spikes are the best match for the structure found on bark bugs. Complementary to the morphology study, the wetting behaviour of the surface structures for water and oil was examined in terms of philic/phobic nature and fluid transport. These results point out a route towards reproducing complex surface structures inspired by nature and their functional response in technologically relevant materials.

Bio-inspired microneedle design for efficient drug/vaccine coating.

Abstract: Biomimetics is the interdisciplinary scientific field focused on the study and imitation of biological systems, with the aim of solving complex technological problems. In this paper, we present a new bio-inspired design for microneedles (MNs) and MN arrays, intended for rapidly coating the MNs with drug/vaccine. The biomimetic approach consists in ornamenting the lateral sides of pyramidal MNs with structures inspired by the external scent efferent systems of some European true bugs, which facilitate a directional liquid transport. To realize these MNs, two-photon polymerization (TPP) technique was used. Liquid coating capabilities of structured and non-structured MNs were compared. Moreover, both in-vivo and ex-vivo skin tests were performed to prove that MNs pierce the skin. We show that the arrays of MNs can be accurately replicated using a micro-moulding technique. We believe this design will be beneficial for the process of drug/vaccine loading onto the needles' surfaces, by making it more efficient and by reducing the drug/vaccine wastage during MN coating process.

Water harvest via dewing.

Abstract: Harvesting water from humid air via dewing can provide a viable solution to a water shortage problem where liquid-phase water is not available Here we experimentally quantify the effects of wettability and geometry of the condensation substrate on the water harvest efficiency Uniformly hydrophilic surfaces are found to exhibit higher rates of water condensation and collection than surfaces with lower wettability This is in contrast to a fog basking method where the most efficient surface consists of hydrophilic islands surrounded by hydrophobic background A thin drainage path in the lower portion of the condensation substrate is revealed to greatly enhance the water collection efficiency The optimal surface conditions found in this work can be used to design a practical device that harvests water as its biological counterpart, a green tree frog, Litoria caerulea, does during the dry season in tropical northern Australia

Bioinspired Special Wettability Surfaces: From Fundamental Research to Water Harvesting Applications

Abstract: Nowadays, the pollution of water has become worse in many parts of the world, which causes a severe shortage of clean water and attracts widespread attention worldwide. Bioinspired from nature, i.e. spider silk, cactus, Namib desert beetle, Nepenthes alata, special wettability surfaces have attracted great interest from fundamental research to water-harvesting applications. Here, recently published literature about creatures possessing water-harvesting ability are reviewed, with a focus on the corresponding water-harvesting mechanisms of creatures in dry or arid regions, consisting of the theory of wetting and transporting. Then a detailed account of the innovative fabrication technologies and bionic water-harvesting materials with special wetting are summarized, i.e. bio-inspired artificial spider silk, bio-inspired artificial cactus-like structures, and bio-inspired artificial Namib desert beetle-like surfaces. Special attentions are paid to the discussion of the advantages and disadvantages of the technologies, as well as factors that affect the amount of water-harvesting. Finally, conclusions, future outlooks and the current challenges for future development of the water-harvesting technology are presented and discussed.

Interplay between materials and microfluidics

Abstract: In this Review, the interplay between materials and microfluidics is examined, with the discussion focused on how recent advances in materials fabrication have expanded the frontiers of microfluidic platforms and how the new microfluidic capabilities are, in turn, furthering materials design.

High-Efficiency Fog Collector: Water Unidirectional Transport on Heterogeneous Rough Conical Wires

Abstract: An artificial periodic roughness-gradient conical copper wire (PCCW) can be fabricated by inspiration from cactus spines and wet spider silks. PCCW can harvest fog on periodic points of the conical surface from air and transports the drops for a long distance without external force, which is attributed to dynamic as-released energy generated from drop deformation in drop coalescence, in addition to both gradients of geometric curve (inducing Laplace pressure) and periodic roughness (inducing surface energy difference). It is found that the ability of fog collection can be related to various tilt-angle wires, thus a fog collector with an array system of PCCWs is further designed to achieve a continuous process of efficient water collection. As a result, the effect of water collection on PCCWs is better than previous results. These findings are significant to develop and design materials with water collection and water transport for promising application in fogwater systems to ease the water crisis.

Nature's moisture harvesters: a comparative review

Abstract: Nature has adapted different methods for surviving dry, arid, xeric conditions. It is the focus of this comparative review to pull together the relevant information gleaned from the literature that could be utilized to design moisture harvesting devices informed by biomimetics. Most water harvesting devices in current use are not informed by nature and those that do are usually based on a biomimetic principle that has been based on one species only. This review draws on the published literature to establish a list of species (animals (vertebrates/invertebrates) and plants) whose habitat is in mainly dry or arid regions and that are known to harvest airborne moisture. Key findings have been outlined and review comments and discussion set out. Following this, surface feature convergences have been identified, namely hexagonal microstructures, groove-like and cone-like geometries. This has been coupled with direction of water flow that is driven by surface energy. As far as the authors are aware, this convergent evolution has not been brought together in this manner before. In the future this information could be translated into an engineered device for collecting water from airborne sources.