Francesca P. A. Fabbiani

Bio: Francesca P. A. Fabbiani is an academic researcher from University of Göttingen. The author has contributed to research in topics: Ruthenium & Crystallization. The author has an hindex of 26, co-authored 62 publications receiving 3106 citations. Previous affiliations of Francesca P. A. Fabbiani include Edinburgh Cancer Research Centre & École Polytechnique Fédérale de Lausanne.

Structure-activity relationships for cytotoxic ruthenium(II) arene complexes containing N,N-, N,O-, and O,O-chelating ligands

Abstract: We report structure−activity relationships for organometallic RuII complexes of the type [(η6-arene)Ru(XY)Cl]Z, where XY is an N,N- (diamine), N,O- (e.g., amino acidate), or O,O- (e.g., β-diketonate) chelating ligand, the arene ranges from benzene derivatives to fused polycyclic hydrocarbons, and Z is usually PF6. The X-ray structures of 13 complexes are reported. All have the characteristic “piano-stool” geometry. The complexes most active toward A2780 human ovarian cancer cells contained XY = ethylenediamine (en) and extended polycyclic arenes. Complexes with polar substituents on the arene or XY = bipyridyl derivatives exhibited reduced activity. The activity of the O,O-chelated complexes depended strongly on the substituents and on the arene. For arene = p-cymene, XY = amino acidate complexes were inactive. Complexes were not cross-resistant with cisplatin, and cross-resistance to Adriamycin was circumvented by replacing XY = en with 1,2-phenylenediamine. Some complexes were also active against colon,...

Comparison of Polymorphic Molecular Crystal Structures through Hirshfeld Surface Analysis

Abstract: Graphical tools based on Hirshfeld surfaces and two-dimensional (2D) fingerprint plots are shown to be valuable for visualizing and analyzing intermolecular interactions in polymorphs of molecular crystals and make the task of polymorph comparison easier and considerably faster. This is the direct result of the underlying principle behind the Hirshfeld surface, which embraces a “whole of structure” view of intermolecular interactions, rather than concentrating exclusively on assumed important (i.e., short) interactions. The subtle relationships between polymorphs of tetrathiafulvalene and p-dichlorobenzene are more easily discernible through comparison of Hirshfeld surfaces and fingerprint plots, rather than solely through conventional structure viewing, and differences and similarities among clearly distinct polymorphs of oxalic acid, terephthalic acid, and p-dichlorobenzene more readily emerge and can be easily catalogued in terms of specific atom···atom interaction types. Conformational polymorphism ma...

Controlling ligand substitution reactions of organometallic complexes: tuning cancer cell cytotoxicity.

Abstract: Organometallic compounds offer broad scope for the design of therapeutic agents, but this avenue has yet to be widely explored. A key concept in the design of anticancer complexes is optimization of chemical reactivity to allow facile attack on the target site (e.g., DNA) yet avoid attack on other sites associated with unwanted side effects. Here, we consider how this result can be achieved for monofunctional “piano-stool” ruthenium(II) arene complexes of the type [(η6-arene)Ru(ethylenediamine)(X)]n+. A potentially important activation mechanism for reactions with biomolecules is hydrolysis. Density functional calculations suggested that aquation (substitution of X by H2O) occurs by means of a concerted ligand interchange mechanism. We studied the kinetics and equilibria for hydrolysis of 21 complexes, containing, as X, halides and pseudohalides, pyridine (py) derivatives, and a thiolate, together with benzene (bz) or a substituted bz as arene, using UV-visible spectroscopy, HPLC, and electrospray MS. The x-ray structures of six complexes are reported. In general, complexes that hydrolyze either rapidly {e.g., X = halide [arene = hexamethylbenzene (hmb)]} or moderately slowly [e.g., X = azide, dichloropyridine (arene = hmb)] are active toward A2780 human ovarian cancer cells, whereas complexes that do not aquate (e.g., X = py) are inactive. An intriguing exception is the X = thiophenolate complex, which undergoes little hydrolysis and appears to be activated by a different mechanism. The ability to tune the chemical reactivity of this class of organometallic ruthenium arene compounds should be useful in optimizing their design as anticancer agents.

High-pressure studies of pharmaceutical compounds and energetic materials

Abstract: The effects of high pressure on pharmaceutical compounds and energetic materials can have important implications for both the properties and performance of these important classes of material. Pharmaceutical compounds are frequently subjected to pressure during processing and formulation, causing interconversion between solid forms that may affect properties such as solubility and bio-availability. Energetic materials experience extremes of both pressure and temperature under conditions of detonation and deflagration, causing changes in properties such as sensitivity to shock and chemical reactivity. This tutorial review outlines the various methods used to study these materials at high pressure, describes how pressure can be used to explore polymorphism, and provides examples of compounds that have been studied at high pressure.

Tuning the Reactivity of Osmium(II) and Ruthenium(II) Arene Complexes under Physiological Conditions

Abstract: The Os(II) arene ethylenediamine (en) complexes [(eta(6)-biphenyl)Os(en)Cl][Z], Z = BPh(4) (4) and BF(4) (5), are inactive toward A2780 ovarian cancer cells despite 4 being isostructural with an active Ru(II) analogue, 4R. Hydrolysis of 5 occurred 40 times more slowly than 4R. The aqua adduct 5A has a low pK(a) (6.3) compared to that of [(eta(6)-biphenyl)Ru(en)(OH(2))](2+) (7.7) and is therefore largely in the hydroxo form at physiological pH. The rate and extent of reaction of 5 with 9-ethylguanine were also less than those of 4R. We replaced the neutral en ligand by anionic acetylacetonate (acac). The complexes [(eta(6)-arene)Os(acac)Cl], arene = biphenyl (6), benzene (7), and p-cymene (8), adopt piano-stool structures similar to those of the Ru(II) analogues and form weak dimers through intermolecular (arene)C-H...O(acac) H-bonds. Remarkably, these Os(II) acac complexes undergo rapid hydrolysis to produce not only the aqua adduct, [(eta(6)-arene)Os(acac)(OH(2))](+), but also the hydroxo-bridged dimer, [(eta(6)-arene)Os(mu(2)-OH)(3)Os(eta(6)-arene)](+). The pK(a) values for the aqua adducts 6A, 7A, and 8A (7.1, 7.3, and 7.6, respectively) are lower than that for [(eta(6)-p-cymene)Ru(acac)(OH(2))](+) (9.4). Complex 8A rapidly forms adducts with 9-ethylguanine and adenosine, but not with cytidine or thymidine. Despite their reactivity toward nucleobases, complexes 6-8 were inactive toward A549 lung cancer cells. This is attributable to rapid hydrolysis and formation of unreactive hydroxo-bridged dimers which, surprisingly, were the only species present in aqueous solution at biologically relevant concentrations. Hence, the choice of chelating ligand in Os(II) (and Ru(II)) arene complexes can have a dramatic effect on hydrolysis behavior and nucleobase binding and provides a means of tuning the reactivity and the potential for discovery of anticancer complexes.

Crystal structure refinement with SHELXL

Abstract: The improvements in the crystal structure refinement program SHELXL have been closely coupled with the development and increasing importance of the CIF (Crystallographic Information Framework) format for validating and archiving crystal structures. An important simplification is that now only one file in CIF format (for convenience, referred to simply as `a CIF') containing embedded reflection data and SHELXL instructions is needed for a complete structure archive; the program SHREDCIF can be used to extract the .hkl and .ins files required for further refinement with SHELXL. Recent developments in SHELXL facilitate refinement against neutron diffraction data, the treatment of H atoms, the determination of absolute structure, the input of partial structure factors and the refinement of twinned and disordered structures. SHELXL is available free to academics for the Windows, Linux and Mac OS X operating systems, and is particularly suitable for multiple-core processors.

Hirshfeld surface analysis

Abstract: In the last few years the analysis of molecular crystal structures using tools based on Hirshfeld surfaces has rapidly gained in popularity. This approach represents an attempt to venture beyond the current paradigm—internuclear distances and angles, crystal packing diagrams with molecules represented via various models, and the identification of close contacts deemed to be important—and to view molecules as “organic wholes”, thereby fundamentally altering the discussion of intermolecular interactions through an unbiased identification of all close contacts.

Comparison of silver and molybdenum microfocus X-ray sources for single-crystal structure determination

Abstract: The quality of diffraction data obtained using silver and molybdenum microsources has been compared for six model compounds with a wide range of absorption factors. The experiments were performed on two 30 W air-cooled Incoatec IµS microfocus sources with multilayer optics mounted on a Bruker D8 goniometer with a SMART APEX II CCD detector. All data were analysed, processed and refined using standard Bruker software. The results show that Ag Kα radiation can be beneficial when heavy elements are involved. A numerical absorption correction based on the positions and indices of the crystal faces is shown to be of limited use for the highly focused microsource beams, presumably because the assumption that the crystal is completely bathed in a (top-hat profile) beam of uniform intensity is no longer valid. Fortunately the empirical corrections implemented in SADABS, although originally intended as a correction for absorption, also correct rather well for the variations in the effective volume of the crystal irradiated. In three of the cases studied (two Ag and one Mo) the final SHELXL R1 against all data after application of empirical corrections implemented in SADABS was below 1%. Since such corrections are designed to optimize the agreement of the intensities of equivalent reflections with different paths through the crystal but the same Bragg 2θ angles, a further correction is required for the 2θ dependence of the absorption. For this, SADABS uses the transmission factor of a spherical crystal with a user-defined value of μr (where μ is the linear absorption coefficient and r is the effective radius of the crystal); the best results are obtained when r is biased towards the smallest crystal dimension. The results presented here suggest that the IUCr publication requirement that a numerical absorption correction must be applied for strongly absorbing crystals is in need of revision.