Francesco Lamberti

Bio: Francesco Lamberti is an academic researcher from University of Padua. The author has contributed to research in topics: Perovskite (structure) & Materials science. The author has an hindex of 12, co-authored 31 publications receiving 461 citations. Previous affiliations of Francesco Lamberti include Istituto Italiano di Tecnologia.

Functionalization of transparent conductive oxide electrode for TiO2-free perovskite solar cells

Abstract: Many of the best performing solar cells based on perovskite-halide light absorbers use TiO2 as an electron selective contact layer. However, TiO2 usually requires high temperature sintering, is related to electrical instabilities in perovskite solar cells, and causes cell performance degradation under full solar spectrum illumination. Here we demonstrate an alternative approach based on the modification of transparent conductive oxide electrodes with self-assembled siloxane-functionalized fullerene molecules, eliminating TiO2 or any other additional electron transporting layer. We demonstrate that these molecules spontaneously form a homogenous monolayer acting as an electron selective layer on top of the fluorine doped tin oxide (FTO) electrode, minimizing material consumption. We find that the fullerene-modified FTO is a robust, chemically inert charge selective contact for perovskite based solar cells, which can reach 15% of stabilised power conversion efficiency in a flat junction device architecture using a scalable, low temperature, and reliable process. In contrast to TiO2, devices employing a molecularly thin functionalized fullerene layer show unaffected performance after 67 h of UV light exposure.

Electroanalysis of trace inorganic arsenic with gold nanoelectrode ensembles

Abstract: The results of a study on the determination of trace levels of arsenic with nanoelectrode ensembles (NEEs) are reported. In order to lower the detection limit and to increase the number of performable analysis for each NEE, the right choice of the supporting electrolyte concentration and electroanalytical parameters were optimized. The electrochemical behavior of As(III) at NEEs was studied at first by cyclic voltammetry, while trace concentrations of As(III) were determined by anodic stripping square wave voltammetry. The method is characterized by a detection limit as low as 5 ng/L (65 pM) after 3 min preconcentration at � 0.4 V. Finally, NEEs were applied to trace As analysis in real samples such as certified seawater samples.

Electronic structure of hybrid halide perovskite photovoltaic absorbers

Abstract: The performance of organometallic perovskite solar cells has rapidly surpassed those of both traditional dye-sensitized and organic photovoltaics, e.g. solar cells based on CH3NH3PbI3 have recently reached 18% conversion efficiency. We analyze its electronic structure and optical properties within the quasiparticle self-consistent GW approximation (QSGW ). Quasiparticle self-consistency is essential for an accurate description of the band structure: bandgaps are much larger than what is predicted by the local density approximation (LDA) or GW based on the LDA. Several characteristics combine to make the electronic structure of this material unusual. First, there is a strong driving force for ferroelectricity, as a consequence the polar organic moiety CH3NH3. The moiety is only weakly coupled to the PbI3 cage; thus it can rotate give rise to ferroelectric domains. This in turn will result in internal junctions that may aid separation of photoexcited electron and hole pairs, and may contribute to the current-voltage hysteresis found in perovskite solar cells. Second, spin orbit modifies both valence band and conduction band dispersions in a very unusual manner: both get split at the R point into two extrema nearby. This can be interpreted in terms of a large Dresselhaus term, which vanishes at R but for small excursions about R varies linearly in k. Conduction bands (Pb 6p character) and valence bands (I 5p) are affected differently; moreover the splittings vary with the orientation of the moiety. We will show how the splittings, and their dependence on the orientation of the moiety through the ferroelectric effect, have important consequences for both electronic transport and the optical properties of this material.

Epidermal Microfluidic Electrochemical Detection System: Enhanced Sweat Sampling and Metabolite Detection

Abstract: Despite tremendous recent efforts, noninvasive sweat monitoring is still far from delivering its early analytical promise. Here, we describe a flexible epidermal microfluidic detection platform fabricated through hybridization of lithographic and screen-printed technologies, for efficient and fast sweat sampling and continuous, real-time electrochemical monitoring of glucose and lactate levels. This soft, skin-mounted device judiciously merges lab-on-a-chip and electrochemical detection technologies, integrated with a miniaturized flexible electronic board for real-time wireless data transmission to a mobile device. Modeling of the device design and sweat flow conditions allowed optimization of the sampling process and the microchannel layout for achieving attractive fluid dynamics and rapid filling of the detection reservoir (within 8 min from starting exercise). The wearable microdevice thus enabled efficient natural sweat pumping to the electrochemical detection chamber containing the enzyme-modified e...

Electrochemistry, biosensors and microfluidics: a convergence of fields

Abstract: Electrochemistry, biosensors and microfluidics are popular research topics that have attracted widespread attention from chemists, biologists, physicists, and engineers. Here, we introduce the basic concepts and recent histories of electrochemistry, biosensors, and microfluidics, and describe how they are combining to form new application-areas, including so-called “point-of-care” systems in which measurements traditionally performed in a laboratory are moved into the field. We propose that this review can serve both as a useful starting-point for researchers who are new to these topics, as well as being a compendium of the current state-of-the art for experts in these evolving areas.

Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications

Abstract: Flexible perovskite solar cells have attracted widespread research effort because of their potential in portable electronics. The efficiency has exceeded 18 % owing to the high-quality perovskite film achieved by various low-temperature fabrication methods and matching of the interface and electrode materials. This Review focuses on recent progress in flexible perovskite solar cells concerning low-temperature fabrication methods to improve the properties of perovskite films, such as full coverage, uniform morphology, and good crystallinity; demonstrated interface layers used in flexible perovskite solar cells, considering key figures-of-merit such as high transmittance, high carrier mobility, suitable band gap, and easy fabrication via low-temperature methods; flexible transparent electrode materials developed to enhance the mechanical stability of the devices; mechanical and long-term environmental stability; an outlook of flexible perovskite solar cells in portable electronic devices; and perspectives of commercialization for flexible perovskite solar cells based on cost.