Françoise Rouquerol

Bio: Françoise Rouquerol is an academic researcher from University of Provence. The author has contributed to research in topics: Adsorption & Thermal analysis. The author has an hindex of 23, co-authored 85 publications receiving 5298 citations. Previous affiliations of Françoise Rouquerol include Aix-Marseille University.

Adsorption by Powders and Porous Solids: Principles, Methodology and Applications

Abstract: The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists, who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites. Key Features * Provides a comprehensive treatment of adsorption at both the gas/solid interface and the liquid/solid interface * Includes chapters dealing with experimental methodology and the interpretation of adsorption data obtained with porous oxides, carbons and zeolites * Techniques capture the importance of heterogeneous catalysis, chemical engineering and the production of pigments, cements, agrochemicals, and pharmaceuticals

Is the bet equation applicable to microporous adsorbents

Abstract: This chapter focuses on how the BET equation is applicable to microporous adsorbents. The BET method can be considered, essentially, as a mathematical means to analyze the adsorption isotherm to derive a “monolayer capacity” and then a surface area. The BET method should not be applied to adsorbents containing micropores in every case. Beyond the “linearity criterion” of the BET plot, two other criteria are found necessary, especially in the presence of micropores, to draw the specific advantage of the BET equation. Calorimetric data for adsorption on microporous adsorbents confirm the fact that the BET monolayer content mostly corresponds to the adsorbate in energetical interaction with the surface. For adsorbents containing micropores, the concept of “BET monolayer content” is misleading and could well be replaced by that of “BET strong retention capacity.” This concept includes the adsorbate present in the micropores together with the content of the statistical monolayer on the non-microporous portion of the surface.

Water Sorption on Mesoporous Aluminosilicate MCM-41

Abstract: Characterization of the interaction of water with the highly ordered mesoporous solid MCM-41 (pore diameter ∼2.5 nm) is undertaken with the aid of several techniques (adsorption gravimetry, X-ray diffraction, Fourier transform infrared spectroscopy, and controlled rate-evolved gas analysis). The relatively complex water-MCM-41 interactions are characterized by a type V isotherm indicating an initial repulsive character followed by a capillary condensation step of the adsorbate. This highlights both hydrophobic and hydrophilic properties of this potential model mesoporous adsorbent.

Calorimetric determination of surface areas: Possibilities of a modified Harkins and Jura procedure

Abstract: The immersion calorimetric method of Harkins and Jura for determining specific surface areas of powders was reexamined in the light of results obtained with 11 powders of different chemical nature and having specific surface areas ranging from 0.6 to 129 m2 g−1. Microcalorimetric determinations were performed, using water (and, to a smaller extent, butanol, pentanol, and n-decane) as the adsorbate and as the immersion liquid. Less than two water layers appears to be enough to “screen” completely the solid surface. This leads to a modified procedure which avoids the previous shortcomings arising from interparticulate condensation and also from the thickness of the preadsorbed layer. The experimental reproducibility is of ±0.1 m2 g−1 ± 1% (of the measured value).

Calorimetric evidence for a bidimensional phase change in the monolayer of nitrogen or argon adsorbed on graphite at 77 K

Abstract: Nitrogen adsorption on a Sterling MT 3100 graphitized carbon black is followed by isothermal microcalorimetry at 77 K. A special feature of the curve of isosteric heats is a distinct peak recorded for a coverage close to 1. Simultaneously, a sub-step is detected on the adsorption isotherm. Both effects are assigned to a bidimensional phase transition of the monolayer, changing from an hypercritical fluid state to a localized state. A similar phenomenon is observed in the case of argon adsorption: here again, a peak on the calorimetric curve and an inflexion on the isotherm are interpreted by a bidimensional fluid → solid transition; nevertheless, in the latter state, argon is not localized at graphite lattice sites.

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)

Abstract: Gas adsorption is an important tool for the characterisation of porous solids and fine powders. Major advances in recent years have made it necessary to update the 1985 IUPAC manual on Reporting Physisorption Data for Gas/Solid Systems. The aims of the present document are to clarify and standardise the presentation, nomenclature and methodology associated with the application of physisorption for surface area assessment and pore size analysis and to draw attention to remaining problems in the interpretation of physisorption data.

Selective gas adsorption and separation in metal–organic frameworks

Abstract: Adsorptive separation is very important in industry. Generally, the process uses porous solid materials such as zeolites, activated carbons, or silica gels as adsorbents. With an ever increasing need for a more efficient, energy-saving, and environmentally benign procedure for gas separation, adsorbents with tailored structures and tunable surface properties must be found. Metal–organic frameworks (MOFs), constructed by metal-containing nodes connected by organic bridges, are such a new type of porous materials. They are promising candidates as adsorbents for gas separations due to their large surface areas, adjustable pore sizes and controllable properties, as well as acceptable thermal stability. This critical review starts with a brief introduction to gas separation and purification based on selective adsorption, followed by a review of gas selective adsorption in rigid and flexible MOFs. Based on possible mechanisms, selective adsorptions observed in MOFs are classified, and primary relationships between adsorption properties and framework features are analyzed. As a specific example of tailor-made MOFs, mesh-adjustable molecular sieves are emphasized and the underlying working mechanism elucidated. In addition to the experimental aspect, theoretical investigations from adsorption equilibrium to diffusion dynamics via molecular simulations are also briefly reviewed. Furthermore, gas separations in MOFs, including the molecular sieving effect, kinetic separation, the quantum sieving effect for H2/D2 separation, and MOF-based membranes are also summarized (227 references).

From Microporous to Mesoporous Molecular-Sieve Materials and Their Use in Catalysis

Abstract: It is possible to say that zeolites are the most widely used catalysts in industry They are crystalline microporous materials which have become extremely successful as catalysts for oil refining, petrochemistry, and organic synthesis in the production of fine and speciality chemicals, particularly when dealing with molecules having kinetic diameters below 10 A The reason for their success in catalysis is related to the following specific features of these materials:1 (1) They have very high surface area and adsorption capacity (2) The adsorption properties of the zeolites can be controlled, and they can be varied from hydrophobic to hydrophilic type materials (3) Active sites, such as acid sites for instance, can be generated in the framework and their strength and concentration can be tailored for a particular application (4) The sizes of their channels and cavities are in the range typical for many molecules of interest (5-12 A), and the strong electric fields2 existing in those micropores together with an electronic confinement of the guest molecules3 are responsible for a preactivation of the reactants (5) Their intricate channel structure allows the zeolites to present different types of shape selectivity, ie, product, reactant, and transition state, which can be used to direct a given catalytic reaction toward the desired product avoiding undesired side reactions (6) All of these properties of zeolites, which are of paramount importance in catalysis and make them attractive choices for the types of processes listed above, are ultimately dependent on the thermal and hydrothermal stability of these materials In the case of zeolites, they can be activated to produce very stable materials not just resistant to heat and steam but also to chemical attacks Avelino Corma Canos was born in Moncofar, Spain, in 1951 He studied chemistry at the Universidad de Valencia (1967−1973) and received his PhD at the Universidad Complutense de Madrid in 1976 He became director of the Instituto de Tecnologia Quimica (UPV-CSIC) at the Universidad Politecnica de Valencia in 1990 His current research field is zeolites as catalysts, covering aspects of synthesis, characterization and reactivity in acid−base and redox catalysis A Corma has written about 250 articles on these subjects in international journals, three books, and a number of reviews and book chapters He is a member of the Editorial Board of Zeolites, Catalysis Review Science and Engineering, Catalysis Letters, Applied Catalysis, Journal of Molecular Catalysis, Research Trends, CaTTech, and Journal of the Chemical Society, Chemical Communications A Corma is coauthor of 20 patents, five of them being for commercial applications He has been awarded with the Dupont Award on new materials (1995), and the Spanish National Award “Leonardo Torres Quevedo” on Technology Research (1996) 2373 Chem Rev 1997, 97, 2373−2419

Porous, Crystalline, Covalent Organic Frameworks

Abstract: Covalent organic frameworks (COFs) have been designed and successfully synthesized by condensation reactions of phenyl diboronic acid {C6H4[B(OH)2]2} and hexahydroxytriphenylene [C18H6(OH)6]. Powder x-ray diffraction studies of the highly crystalline products (C3H2BO)6.(C9H12)1 (COF-1) and C9H4BO2 (COF-5) revealed expanded porous graphitic layers that are either staggered (COF-1, P6(3)/mmc) or eclipsed (COF-5, P6/mmm). Their crystal structures are entirely held by strong bonds between B, C, and O atoms to form rigid porous architectures with pore sizes ranging from 7 to 27 angstroms. COF-1 and COF-5 exhibit high thermal stability (to temperatures up to 500 degrees to 600 degrees C), permanent porosity, and high surface areas (711 and 1590 square meters per gram, respectively).

Surface and Colloid Science

Abstract: 1: Magnetic Particles: Preparation, Properties and Applications: M. Ozaki. 2: Maghemite (gamma-Fe2O3): A Versatile Magnetic Colloidal Material C.J. Serna, M.P. Morales. 3: Dynamics of Adsorption and Oxidation of Organic Molecules on Illuminated Titanium Dioxide Particles Immersed in Water M.A. Blesa, R.J. Candal, S.A. Bilmes. 4: Colloidal Aggregation in Two-Dimensions A. Moncho-Jorda, F. Martinez-Lopez, M.A. Cabrerizo-Vilchez, R. Hidalgo Alvarez, M. Quesada-PMerez. 5: Kinetics of Particle and Protein Adsorption Z. Adamczyk.