scispace - formally typeset
Search or ask a question
Author

Frank S. Bates

Bio: Frank S. Bates is an academic researcher from University of Minnesota. The author has contributed to research in topics: Copolymer & Phase (matter). The author has an hindex of 107, co-authored 589 publications receiving 53582 citations. Previous affiliations of Frank S. Bates include AT&T & University of Pennsylvania.
Topics: Copolymer, Phase (matter), Polymer, Micelle, Epoxy


Papers
More filters
Journal ArticleDOI
TL;DR: Block copolymers are macromolecules composed of sequences, or blocks, of chemically distinct repeat units that make possible the sequential addition of monomers to various carbanion-ter­ minated ("living") linear polymer chains.
Abstract: Block copolymers are macromolecules composed of sequences, or blocks, of chemically distinct repeat units. The development of this field originated with the discovery of termination-free anionic polymerization, which made possible the sequential addition of monomers to various carbanion-ter­ minated ("living") linear polymer chains. Polymerization of just two dis­ tinct monomer types (e.g. styrene and isoprene) leads to a class of materials referred to as AB block copolymers. Within this class, a variety of molec­ ular architectures is possible. For example, the simplest combination, obtained by the two-step anionic polymerization of A and B monomers, is an (A-B) dioblock copolymer. A three-step reaction provides for the preparation of (ABA) or (BAB) triblock copolymer. Alternatively, "living" diblock copolymers can be reacted with an n-functional coupling agent to produce (A-B)n star-block copolymers, where n = 2 constitutes a triblock copolymer. Several representative (A-B)n block copolymer architectures

3,475 citations

Journal ArticleDOI
TL;DR: The Knitting Pattern as mentioned in this paper is a block copolymer that was discovered by Reimund Stadler and his coworkers and reflects a delicate free-energy minimization that is common to all blockcopolymer materials.
Abstract: Block copolymers are all around us, found in such products as upholstery foam, adhesive tape and asphalt additives. This class of macromolecules is produced by joining two or more chemically distinct polymer blocks, each a linear series of identical monomers, that may be thermodynamically incompatible (like oil and vinegar). Segregation of these blocks on the molecular scale (5–100 nm) can produce astonishingly complex nanostructures, such as the “knitting pattern” shown on the cover of this issue of PHYSICS TODAY. This striking pattern, discovered by Reimund Stadler and his coworkers, reflects a delicate free‐energy minimization that is common to all block copolymer materials.

2,824 citations

Journal ArticleDOI
14 May 1999-Science
TL;DR: The results suggest a new class of synthetic thin-shelled capsules based on block copolymer chemistry, and both the membrane bending and area expansion moduli of electroformed polymersomes (polymer-based liposomes) fell within the range of lipid membrane measurements.
Abstract: Vesicles were made from amphiphilic diblock copolymers and characterized by micromanipulation. The average molecular weight of the specific polymer studied, polyethyleneoxide-polyethylethylene (EO40-EE37), is several times greater than that of typical phospholipids in natural membranes. Both the membrane bending and area expansion moduli of electroformed polymersomes (polymer-based liposomes) fell within the range of lipid membrane measurements, but the giant polymersomes proved to be almost an order of magnitude tougher and sustained far greater areal strain before rupture. The polymersome membrane was also at least 10 times less permeable to water than common phospholipid bilayers. The results suggest a new class of synthetic thin-shelled capsules based on block copolymer chemistry.

2,338 citations

Journal ArticleDOI
TL;DR: In this article, a mean-field phase diagram for conformationally symmetric diblock melts using the standard Gaussian polymer model is presented, which traverses the weak- to strong-segregation regimes, is free of traditional approximations.
Abstract: A mean-field phase diagram for conformationally symmetric diblock melts using the standard Gaussian polymer model is presented. Our calculation, which traverses the weak- to strong-segregation regimes, is free of traditional approximations. Regions of stability are determined for disordered (DIS) melts and for ordered structures including lamellae (L), hexagonally packed cylinders (H), body-centered cubic spheres (QIm3m), close-packed spheres (CPS), and the bicontinuous cubic network with Ia3d symmetry (QIa3d). The CPS phase exists in narrow regions along the order−disorder transition for χN ≥ 17.67. Results suggest that the QIa3d phase is not stable above χN ∼ 60. Along the L/QIa3d phase boundaries, a hexagonally perforated lamellar (HPL) phase is found to be nearly stable. Our results for the bicontinuous Pn3m cubic (QPn3m) phase, known as the OBDD, indicate that it is an unstable structure in diblock melts. Earlier approximation schemes used to examine mean-field behavior are reviewed, and compa...

1,506 citations

Journal ArticleDOI
22 Feb 1991-Science
TL;DR: Two representative molecular architectures, binary linear homopolymer mixtures and diblock copolymers, exhibiting macrophase separation and microphase segregation, respectively, are examined in some detail.
Abstract: Different polymers can be combined into a single material in many ways, which can lead to a wide range of phase behaviors that directly influence the associated physical properties and ultimate applications. Four factors control polymer-polymer phase behavior: choice of monomers, molecular architecture, composition, and molecular size. Current theories and experiments that deal with the equilibrium thermodynamics and non-equilibrium dynamics of polymer mixtures are described in terms of these experimentally accessible parameters. Two representative molecular architectures, binary linear homopolymer mixtures and diblock copolymers, exhibiting macrophase separation and microphase segregation, respectively, are examined in some detail. Although these model systems are fairly well understood, a myriad of mixing scenarios, with both existing and unrealized materials applications, remain unexplored at a fundamental level.

1,332 citations


Cited by
More filters
28 Jul 2005
TL;DR: PfPMP1)与感染红细胞、树突状组胞以及胎盘的单个或多个受体作用,在黏附及免疫逃避中起关键的作�ly.
Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1(PfPMP1)与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用,在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员,通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

18,940 citations

Journal ArticleDOI
23 Jan 1998-Science
TL;DR: Use of amphiphilic triblock copolymers to direct the organization of polymerizing silica species has resulted in the preparation of well-ordered hexagonal mesoporous silica structures (SBA-15) with uniform pore sizes up to approximately 300 angstroms.
Abstract: Use of amphiphilic triblock copolymers to direct the organization of polymerizing silica species has resulted in the preparation of well-ordered hexagonal mesoporous silica structures (SBA-15) with uniform pore sizes up to approximately 300 angstroms. The SBA-15 materials are synthesized in acidic media to produce highly ordered, two-dimensional hexagonal (space group p6mm) silica-block copolymer mesophases. Calcination at 500°C gives porous structures with unusually large interlattice d spacings of 74.5 to 320 angstroms between the (100) planes, pore sizes from 46 to 300 angstroms, pore volume fractions up to 0.85, and silica wall thicknesses of 31 to 64 angstroms. SBA-15 can be readily prepared over a wide range of uniform pore sizes and pore wall thicknesses at low temperature (35° to 80°C), using a variety of poly(alkylene oxide) triblock copolymers and by the addition of cosolvent organic molecules. The block copolymer species can be recovered for reuse by solvent extraction with ethanol or removed by heating at 140°C for 3 hours, in both cases, yielding a product that is thermally stable in boiling water.

10,807 citations

Journal ArticleDOI
TL;DR: The arsenal of nanocarriers and molecules available for selective tumour targeting, and the challenges in cancer treatment are detailed and emphasized.
Abstract: Nanotechnology has the potential to revolutionize cancer diagnosis and therapy. Advances in protein engineering and materials science have contributed to novel nanoscale targeting approaches that may bring new hope to cancer patients. Several therapeutic nanocarriers have been approved for clinical use. However, to date, there are only a few clinically approved nanocarriers that incorporate molecules to selectively bind and target cancer cells. This review examines some of the approved formulations and discusses the challenges in translating basic research to the clinic. We detail the arsenal of nanocarriers and molecules available for selective tumour targeting, and emphasize the challenges in cancer treatment.

7,443 citations

Journal ArticleDOI
TL;DR: In this paper, a family of highly ordered mesoporous (20−300 A) structures have been synthesized by the use of commercially available nonionic alkyl poly(ethylene oxide) (PEO) oligomeric surfactants and poly(alkylene oxide) block copolymers in acid media.
Abstract: A family of highly ordered mesoporous (20−300 A) silica structures have been synthesized by the use of commercially available nonionic alkyl poly(ethylene oxide) (PEO) oligomeric surfactants and poly(alkylene oxide) block copolymers in acid media. Periodic arrangements of mescoscopically ordered pores with cubic Im3m, cubic Pm3m (or others), 3-d hexagonal (P63/mmc), 2-d hexagonal (p6mm), and lamellar (Lα) symmetries have been prepared. Under acidic conditions at room temperature, the nonionic oligomeric surfactants frequently form cubic or 3-d hexagonal mesoporous silica structures, while the nonionic triblock copolymers tend to form hexagonal (p6mm) mesoporous silica structures. A cubic mesoporous silica structure (SBA-11) with Pm3m diffraction symmetry has been synthesized in the presence of C16H33(OCH2CH2)10OH (C16EO10) surfactant species, while a 3-d hexagonal (P63/mmc) mesoporous silica structure (SBA-12) results when C18EO10 is used. Surfactants with short EO segments tend to form lamellar mesost...

6,274 citations

Journal ArticleDOI
TL;DR: In this article, a review of dissipative particle dynamics (DPD) as a mesoscopic simulation method is presented, and a link between these parameters and χ-parameters in Flory-Huggins-type models is made.
Abstract: We critically review dissipative particle dynamics (DPD) as a mesoscopic simulation method. We have established useful parameter ranges for simulations, and have made a link between these parameters and χ-parameters in Flory-Huggins-type models. This is possible because the equation of state of the DPD fluid is essentially quadratic in density. This link opens the way to do large scale simulations, effectively describing millions of atoms, by firstly performing simulations of molecular fragments retaining all atomistic details to derive χ-parameters, then secondly using these results as input to a DPD simulation to study the formation of micelles, networks, mesophases and so forth. As an example application, we have calculated the interfacial tension σ between homopolymer melts as a function of χ and N and have found a universal scaling collapse when σ/ρkBTχ0.4 is plotted against χN for N>1. We also discuss the use of DPD to simulate the dynamics of mesoscopic systems, and indicate a possible problem with...

3,837 citations