There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

Over the past two decades, fiber laser technologies have matured to such an extent that they have captured a large portion of the commercial laser marketplace. Yet, there still is a seemingly unquenchable thirst for ever greater optical power to levels where certain deleterious light-matter interactions that limit continued power scaling become significant. In the past decade or so, the industry has focused mainly on waveguide engineering to overcome many of these hurdles. However, there is an emerging body of work emphasizing the enabling role of the material. In an effort to underpin these developments, this paper reviews the relevance of the material in high power fiber laser technologies. As the durable material-of-choice for the application, the discussion will mainly be limited to silicate host glasses. The discussion presented herein follows an outward path, starting with the trivalent rare earth ions and their spectroscopic properties. The ion then is placed into a host, whose impact on the spectroscopy is reviewed. Finally, adverse interactions between the laser lightwave and the host are discussed, and novel composition glass fiber design and fabrication methodologies are presented. With deference to the symbiosis required between material and waveguide engineering in active fiber development, this review will emphasize the former. Specifically, where appropriate, materials-based paths to the enhancement of laser performance will be underscored.

/pdf/materials-for-optical-fiber-lasers-a-review-2n45z3gaeq.pdf

Materials for optical fiber lasers: A review

Ultrafast fiber lasers have the potential to make applications of ultrashort pulses widespread – techniques not only for scientists, but also for doctors, manufacturing engineers, and more. Today, this potential is only realized in refractive surgery and some femtosecond micromachining. The existing market for ultrafast lasers remains dominated by solid-state lasers, primarily Ti:sapphire, due to their superior performance. Recent advances show routes to ultrafast fiber sources that provide performance and capabilities equal to, and in some cases beyond, those of Ti:sapphire, in compact, versatile, low-cost devices. In this paper, we discuss the prospects for future ultrafast fiber lasers built on new kinds of pulse generation that capitalize on nonlinear dynamics. We focus primarily on three promising directions: mode-locked oscillators that use nonlinearity to enhance performance; systems that use nonlinear pulse propagation to achieve ultrashort pulses without a mode-locked oscillator; and multimode fiber lasers that exploit nonlinearities in space and time to obtain unparalleled control over an electric field.

Several new directions for ultrafast fiber lasers [Invited].

This work presents a review on the effect of transverse mode instability in high-power fiber laser systems and the corresponding investigations led worldwide over the past decade. This paper includes a description of the experimental observations and the physical origin of this effect, as well as some of the proposed mitigation strategies.

Transverse mode instability

We report on a newly designed and fabricated ytterbium-doped large mode area fiber with an extremely low NA (~0.04) and related systematic investigations on fiber parameters that crucially influence the mode instability threshold. The fiber is used to demonstrate a narrow linewidth, continuous wave, single mode fiber laser amplifier emitting a maximum output power of 3 kW at a wavelength of 1070 nm without reaching the mode-instability threshold. A high slope efficiency of 90 %, excellent beam quality, high temporal stability, and an ASE suppression of 70 dB could be reached with a signal linewidth of only 170 pm.

Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier

In this contribution we investigate the transversal mode instability behavior of a ytterbium-doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the influence of the bend diameter and the pump wavelength within the scope of the absorption length and the length of the fiber. Furthermore, with a newly developed fiber we report on 4.4 kW of single-mode output power at 40 cm bend diameter.

Experimental investigations on the TMI thresholds of low-NA Yb-doped single-mode fibers

We report on detailed in situ distributed temperature measurements inside a high power fiber amplifier. The deducted thermal load and the transversal mode instability (TMI) threshold of a commercial large mode area fiber with 25 μm core and 400 μm cladding were measured at various seed wavelengths. By matching these results with detailed simulations we show that photodarkening has a negligible impact on the thermal load and, therefore, on the TMI threshold in this fiber.

Measuring thermal load in fiber amplifiers in the presence of transversal mode instabilities.

In this contribution we demonstrate the generation of a frequency comb with sub-picosecond pulses by seeding an amplifier with two narrow linewidth laser diodes separated by 50 GHz. The results are achieved in the normal dispersion regime with parameters where the forming of the comb is dominated by self-phase modulation. A numerical simulation is performed with different nonlinear interaction lengths, whereas the experimental realization is done in a high power Yb-doped fiber amplifier to generate the necessary nonlinearity. An output power of 750 W with compression to sub-picosecond pulse durations is shown. Further perspectives towards higher power levels and larger comb-line spacing are discussed.

Franz Beier

Papers

Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier

Experimental investigations on the TMI thresholds of low-NA Yb-doped single-mode fibers

Measuring thermal load in fiber amplifiers in the presence of transversal mode instabilities.

High power sub-ps pulse generation by compression of a frequency comb obtained by a nonlinear broadened two colored seed