Showing papers by "Fred Barlow published in 2008"
TL;DR: In this article, a new, patent-pending method of cooling high-power laser diode arrays has been developed which leverages advances in several areas of materials science and manufacturing.
Abstract: A new, patent-pending method of cooling high-power laser diode arrays has been developed which leverages advances in several areas of materials science and manufacturing. This method utilizes multi-layer ceramic microchannel coolers with small (100’s of microns) integral water channels to cool the laser diode bar. This approach is similar to the current state-of-the-art method of cooling laser diode bars with copper microchannel coolers. However, the multi-layer ceramic coolers offer many advantages over the copper coolers, including reliability and manufacturing flexibility. The ceramic coolers do not require the use of deionized water as is mandatory of high-thermal-performance copper coolers. Experimental and modeled data is presented that demonstrates thermal performance equal to or better than copper microchannel coolers that are commercially available. Results of long-term, high-flow tests are also presented to demonstrate the resistance of the ceramic coolers to erosion. The materials selected for these coolers allow for the laser diode bars to be mounted using eutectic AuSn solder. This approach allows for maximum solder bond integrity over the life of the part.
1 citations