scispace - formally typeset
Search or ask a question
Author

Frederick Declercq

Other affiliations: Katholieke Universiteit Leuven, IMEC
Bio: Frederick Declercq is an academic researcher from Ghent University. The author has contributed to research in topics: Antenna (radio) & Microstrip antenna. The author has an hindex of 14, co-authored 35 publications receiving 798 citations. Previous affiliations of Frederick Declercq include Katholieke Universiteit Leuven & IMEC.

Papers
More filters
Journal IssueDOI
TL;DR: The expected improvement approach is demonstrated on two electromagnetic problems, namely, a microwave filter and a textile antenna, and it is shown that this approach can improve the quality of designs on these problems.
Abstract: The increasing use of expensive computer simulations in engineering places a serious computational burden on associated optimization problems. Surrogate-based optimization becomes standard practice in analyzing such expensive black-box problems. This article discusses several approaches that use surrogate models for optimization and highlights one sequential design approach in particular, namely, expected improvement. The expected improvement approach is demonstrated on two electromagnetic problems, namely, a microwave filter and a textile antenna. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.

125 citations

Journal ArticleDOI
TL;DR: A new matrix-pencil two-line method that removes perturbations in the calculated effective permittivity and loss tangent which are caused by imperfect deembedding and inhomogeneities of the textile microstrip line structure is proposed.
Abstract: The emergence of wearable antennas to be integrated into garments has revealed the need for a careful electromagnetic characterization of textile materials. Therefore, we propose in this paper a new matrix-pencil two-line method that removes perturbations in the calculated effective permittivity and loss tangent which are caused by imperfect deembedding and inhomogeneities of the textile microstrip line structure. The approach has been rigorously validated for high-frequency laminates by comparing measured and simulated data for the resonance frequency of antennas designed using the calculated parameters. The method has been successfully applied to characterize the permittivity and loss tangent of a variety of textile materials and up to a frequency of 10 GHz. Furthermore it is shown that the use of electrotextiles in antenna design influences the effective substrate permittivity.

107 citations

Journal ArticleDOI
08 Oct 2014
TL;DR: Simultaneous scavenging from different energy sources significantly increases the autonomy of a wearable system, in the meanwhile reducing battery size, by integrating a power management system and multiple diverse scavenging transducers and a storage module on a well-chosen textile antenna topology.
Abstract: Smart-fabric interactive-textile systems offer exciting new possibilities, provided that they exhibit sufficient robustness and autonomy to be reliably deployed in critical applications. Textile multiantenna systems, unobtrusively integrated in a professional garment, are key components of such systems, as they set up energy-efficient and stable wireless body-centric communication links. Yet, their functionality may be further extended by exploiting their surface as energy-harvesting platform. Different state-of-the-art energy harvesters are suitable for compact integration onto a textile antenna. We demonstrate this by integrating a power management system, together with multiple diverse scavenging transducers and a storage module, on a well-chosen textile antenna topology. We provide guidelines to ensure that the additional hardware does not affect the textile antenna's performance. Simultaneous scavenging from different energy sources significantly increases the autonomy of a wearable system, in the meanwhile reducing battery size.

83 citations

Journal ArticleDOI
TL;DR: In this paper, a dual-band wearable textile antenna based on substrate integrated waveguide technology is presented for operation in the [2.4-2.4835]-GHz Industrial, Scientific and Medical band and the [ 2.5-1.69]-GHz 4G LTE band 7.
Abstract: A dual-band wearable textile antenna based on substrate integrated waveguide technology is presented for operation in the [2.4-2.4835]-GHz Industrial, Scientific and Medical band and the [2.5-2.69]-GHz 4G LTE band 7. The antenna features an integrated flexible solar harvesting system, consisting of a flexible solar cell, a power management system, and energy storage. All these components are judiciously positioned on the antenna platform in order not to affect its radiation performance. The measured reflection coefficients and radiation characteristics after bending and deploying the antenna on a human body prove that the antenna is well suited for on-body use. A measured on-body antenna gain and radiation efficiency of 5.0 dBi and 89% are realized. Measurements in a real-life situation have demonstrated the ability to scavenge a maximum of 53 mW by means of a single integrated flexible solar cell.

81 citations


Cited by
More filters
Journal ArticleDOI

6,278 citations

Journal ArticleDOI
TL;DR: The essential components required for vitals sensors are outlined and discussed here, including the reported sensor systems, sensing mechanisms, sensor fabrication, power, and data processing requirements.
Abstract: Advances in wireless technologies, low-power electronics, the internet of things, and in the domain of connected health are driving innovations in wearable medical devices at a tremendous pace. Wearable sensor systems composed of flexible and stretchable materials have the potential to better interface to the human skin, whereas silicon-based electronics are extremely efficient in sensor data processing and transmission. Therefore, flexible and stretchable sensors combined with low-power silicon-based electronics are a viable and efficient approach for medical monitoring. Flexible medical devices designed for monitoring human vital signs, such as body temperature, heart rate, respiration rate, blood pressure, pulse oxygenation, and blood glucose have applications in both fitness monitoring and medical diagnostics. As a review of the latest development in flexible and wearable human vitals sensors, the essential components required for vitals sensors are outlined and discussed here, including the reported sensor systems, sensing mechanisms, sensor fabrication, power, and data processing requirements.

959 citations

Journal ArticleDOI
TL;DR: The design, manufacture, and performance of the first textile planar antenna to be implemented on flexible protective foam, suitable for firefighter garments are described, which results in an antenna that is highly appropriate for garment integration.
Abstract: The introduction of intelligent textile systems to increase the wearer's level of protection has exposed the necessity of wearable communication tools and has led to research in textile antennas. However, most textile fabrics are quite thin (0.5 mm), making it challenging for antenna designers to provide an antenna which operates adequately and resiliently in the 2.4-2.4835-GHz industrial-scientific-medical bandwidth. Flexible pad foam is commonly available in protective clothing and overcomes these constraints by providing a uniform, stable, and sufficient thickness. Moreover, its cellular structure and properties, such as flame retardance and water repellence, make it an excellent substrate material for the integration of antennas into protective garments. In this paper, we describe the design, manufacture, and performance of the first textile planar antenna to be implemented on flexible protective foam, suitable for firefighter garments. We employed shock absorbing foam with a thickness of 3.94 mm and achieved a nearly circularly polarized antenna with a bandwidth of more than 180 MHz even when the antenna was compressed or bent. These outstanding substrate and antenna characteristics result in an antenna that is highly appropriate for garment integration.

412 citations

Journal ArticleDOI
15 Nov 2012-Sensors
TL;DR: A survey of the key points for the design and development of textile antennas, from the choice of the textile materials to the framing of the antenna is presented.
Abstract: In the broad context of Wireless Body Sensor Networks for healthcare and pervasive applications, the design of wearable antennas offers the possibility of ubiquitous monitoring, communication and energy harvesting and storage. Specific requirements for wearable antennas are a planar structure and flexible construction materials. Several properties of the materials influence the behaviour of the antenna. For instance, the bandwidth and the efficiency of a planar microstrip antenna are mainly determined by the permittivity and the thickness of the substrate. The use of textiles in wearable antennas requires the characterization of their properties. Specific electrical conductive textiles are available on the market and have been successfully used. Ordinary textile fabrics have been used as substrates. However, little information can be found on the electromagnetic properties of regular textiles. Therefore this paper is mainly focused on the analysis of the dielectric properties of normal fabrics. In general, textiles present a very low dielectric constant that reduces the surface wave losses and increases the impedance bandwidth of the antenna. However, textile materials are constantly exchanging water molecules with the surroundings, which affects their electromagnetic properties. In addition, textile fabrics are porous, anisotropic and compressible materials whose thickness and density might change with low pressures. Therefore it is important to know how these characteristics influence the behaviour of the antenna in order to minimize unwanted effects. This paper presents a survey of the key points for the design and development of textile antennas, from the choice of the textile materials to the framing of the antenna. An analysis of the textile materials that have been used is also presented.

310 citations

Proceedings ArticleDOI
11 Dec 2009
TL;DR: In this article, the authors present a literature review of wearable antenna technology and provide readers with the background of the wearable antenna that would include about specification of the antenna, material for the antenna and analysis that must be done to design proper wearable antennas.
Abstract: Utilization of wearable textiles in the antenna segment has been seen on the rise due to the recent miniaturization of wireless devices. A wearable antenna is meant to be a part of the clothing used for communication purposes, which includes tracking and navigation, mobile computing and public safety. This literature review intend to disclose this unconventional antenna technology and provides readers with the background of the wearable antenna that would include about specification of the antenna, material for the antenna and analysis that must be done to design proper wearable antennas. All the designs presented are of the recent development in wearable technology.

254 citations