Fredrik Höök

Bio: Fredrik Höök is an academic researcher from Chalmers University of Technology. The author has contributed to research in topics: Lipid bilayer & Quartz crystal microbalance. The author has an hindex of 57, co-authored 220 publications receiving 14707 citations. Previous affiliations of Fredrik Höök include Lund University & Duke University.

Quartz crystal microbalance setup for frequency and Q‐factor measurements in gaseous and liquid environments

Abstract: An experimental setup has been constructed for simultaneous measurements of the frequency, the absolute Q factor, and the amplitude of oscillation of a quartz crystal microbalance (QCM). The technical solution allows operation in vacuum, air, or liquid. The crystal is driven at its resonant frequency by an oscillator that can be intermittently disconnected causing the crystal oscillation amplitude to decay exponentially. From the recorded decay curve the absolute Q factor (calculated from the decay time constant), the frequency of the freely oscillating crystal, and the amplitude of oscillation are obtained. All measurements are fully automated. One electrode of the QCM in our setup was connected to true ground which makes possible simultaneous electrochemistry. The performance is illustrated by experiments in fluids of varying viscosity (gas and liquid) and by proteinadsorptionin situ. We found, in addition to the above results, that the amplitude of oscillation is not always directly proportional to the Q factor, as the commonly used theory states. This puts limitations on the customary use of the amplitude of oscillation as a measure of the Q factor.

Variations in Coupled Water, Viscoelastic Properties, and Film Thickness of a Mefp-1 Protein Film during Adsorption and Cross-Linking: A Quartz Crystal Microbalance with Dissipation Monitoring, Ellipsometry, and Surface Plasmon Resonance Study

Abstract: We have measured the time-resolved adsorption kinetics of the mussel adhesive protein (Mefp-1) on a nonpolar, methyl-terminated (thiolated) gold surface, using three independent techniques: quartz crystal microbalance with dissipation monitoring (QCM-D), surface plasmon resonance, and ellipsometry. The QCM-D and ellipsometry data shows that, after adsorption to saturation of Mefp-1, cross-linking of the protein layer using NaIO4 transforms it from an extended (∼20 nm), water-rich, and hydrogel-like state to a much thinner (∼5 nm), compact, and less water-rich state. Furthermore, we show how quantitative data about the thickness, shear elastic modulus, and shear viscosity of the protein film can be obtained with the QCM-D technique, even beyond the Sauerbrey regime, if frequency (f) and energy dissipation (D) measurements measured at multiple harmonics are combined with theoretical simulations using a Voight-based viscoelastic model. The modeling result was confirmed by substituting H2O for D2O. As expect...

Simultaneous frequency and dissipation factor QCM measurements of biomolecular adsorption and cell adhesion

Abstract: We have measured the energy dissipation of the quartz crystal microbalance(QCM), operating in the liquid phase, when mono- or multi-layers of bio-molecules and biofilms form on the QCM electrode (with a time resolution of ca. 1 s). Examples are taken from protein adsorption, lipid vesicle adsorption and cell adhesion studies. Our results show that even very thin (a few nm) biofilms dissipate a significant amount of energy owing to the QCM oscillation. Various mechanisms for this energy dissipation are discussed. Three main contributions to the measured increase in energy dissipation are considered. (i) A viscoelastic porous structure (the biofilm) that is strained during oscillation, (ii) trapped liquid that moves between or in and out of the pores due to the deformation of the film and (iii) the load from the bulk liquid which increases the strain of the film. These mechanisms are, in reality, not entirely separable, rather, they constitute an effective viscoelastic load. The biofilms can therefore not be considered rigidly coupled to the QCM oscillation. It is further shown theoretically that viscoelastic layers with thicknesses comparable to the biofilms studied in this work can induce energy dissipation of the same magnitude as the measured ones.

Energy Dissipation Kinetics for Protein and Antibody−Antigen Adsorption under Shear Oscillation on a Quartz Crystal Microbalance

Abstract: A new quartz crystal microbalance instrument, allowing simultaneous frequency (f) and dissipation factor (D) measurements, has been used to study protein adsorption kinetics by measuring time-resolved data of both the D-factor, measuring the energy dissipation due to the added overlayer, and the f-shift, measuring the effective mass load on the sensor. Four model proteins (myoglobin, hemoglobin, human serum albumin (HSA), ferritin) and one antibody−antigen reaction (antibody against HSA) were studied on a hydrophobic, methyl-terminated (−CH3) gold surface. In all five cases system-specific, positive D-shifts and negative f-shifts were observed, revealing different adsorption phases. The D-factor measurements provide new information about protein adsorption and improve the interpretation of the frequency shift in terms of mass uptake. Possible mechanisms for the adlayer-induced dissipation are discussed.

Intact Vesicle Adsorption and Supported Biomembrane Formation from Vesicles in Solution: Influence of Surface Chemistry, Vesicle Size, Temperature, and Osmotic Pressure†

Abstract: The adsorption kinetics of small unilamellar egg-yolk phosphatidylcholine vesicles was investigated by the quartz crystal microbalance−dissipation (QCM−D) technique, as a function of surface chemistry (on SiO2, Si3N4, Au, TiO2, and Pt), temperature (273−303 K), vesicle size (25−200 nm), and osmotic pressure. On SiO2 and Si3N4, the vesicles adsorb intact at low coverage, followed by transformation to a bilayer at a critical coverage. On TiO2, oxidized Pt, and oxidized Au, the vesicles adsorb intact at all coverages and all studied temperatures. Variation of vesicle size does not change the qualitative behavior on any of the surfaces, but the quantitative differences provide important information about surface-induced vesicle deformation. In the low-coverage regime (where vesicles adsorb intact on all surfaces), the deformation is much larger on SiO2 than on the surfaces where bilayer formation does not occur. This is attributed to stronger vesicle−surface interaction on SiO2. The bilayer formation is therm...

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

Plasmonics: Fundamentals and Applications

Abstract: Fundamentals of Plasmonics.- Electromagnetics of Metals.- Surface Plasmon Polaritons at Metal / Insulator Interfaces.- Excitation of Surface Plasmon Polaritons at Planar Interfaces.- Imaging Surface Plasmon Polariton Propagation.- Localized Surface Plasmons.- Electromagnetic Surface Modes at Low Frequencies.- Applications.- Plasmon Waveguides.- Transmission of Radiation Through Apertures and Films.- Enhancement of Emissive Processes and Nonlinearities.- Spectroscopy and Sensing.- Metamaterials and Imaging with Surface Plasmon Polaritons.- Concluding Remarks.

Biosensing with plasmonic nanosensors

Abstract: Recent developments have greatly improved the sensitivity of optical sensors based on metal nanoparticle arrays and single nanoparticles. We introduce the localized surface plasmon resonance (LSPR) sensor and describe how its exquisite sensitivity to size, shape and environment can be harnessed to detect molecular binding events and changes in molecular conformation. We then describe recent progress in three areas representing the most significant challenges: pushing sensitivity towards the single-molecule detection limit, combining LSPR with complementary molecular identification techniques such as surface-enhanced Raman spectroscopy, and practical development of sensors and instrumentation for routine use and high-throughput detection. This review highlights several exceptionally promising research directions and discusses how diverse applications of plasmonic nanoparticles can be integrated in the near future.

Minimal information for studies of extracellular vesicles 2018 (MISEV2018) : a position statement of the International Society for Extracellular Vesicles and update of the MISEV2014 guidelines

Abstract: The last decade has seen a sharp increase in the number of scientific publications describing physiological and pathological functions of extracellular vesicles (EVs), a collective term covering various subtypes of cell-released, membranous structures, called exosomes, microvesicles, microparticles, ectosomes, oncosomes, apoptotic bodies, and many other names. However, specific issues arise when working with these entities, whose size and amount often make them difficult to obtain as relatively pure preparations, and to characterize properly. The International Society for Extracellular Vesicles (ISEV) proposed Minimal Information for Studies of Extracellular Vesicles (“MISEV”) guidelines for the field in 2014. We now update these “MISEV2014” guidelines based on evolution of the collective knowledge in the last four years. An important point to consider is that ascribing a specific function to EVs in general, or to subtypes of EVs, requires reporting of specific information beyond mere description of function in a crude, potentially contaminated, and heterogeneous preparation. For example, claims that exosomes are endowed with exquisite and specific activities remain difficult to support experimentally, given our still limited knowledge of their specific molecular machineries of biogenesis and release, as compared with other biophysically similar EVs. The MISEV2018 guidelines include tables and outlines of suggested protocols and steps to follow to document specific EV-associated functional activities. Finally, a checklist is provided with summaries of key points.

Surface Plasmon Resonance Sensors for Detection of Chemical and Biological Species

Abstract: 5.1. Detection Formats 475 5.2. Food Quality and Safety Analysis 477 5.2.1. Pathogens 477 5.2.2. Toxins 479 5.2.3. Veterinary Drugs 479 5.2.4. Vitamins 480 5.2.5. Hormones 480 5.2.6. Diagnostic Antibodies 480 5.2.7. Allergens 481 5.2.8. Proteins 481 5.2.9. Chemical Contaminants 481 5.3. Medical Diagnostics 481 5.3.1. Cancer Markers 481 5.3.2. Antibodies against Viral Pathogens 482 5.3.3. Drugs and Drug-Induced Antibodies 483 5.3.4. Hormones 483 5.3.5. Allergy Markers 483 5.3.6. Heart Attack Markers 484 5.3.7. Other Molecular Biomarkers 484 5.4. Environmental Monitoring 484 5.4.1. Pesticides 484 5.4.2. 2,4,6-Trinitrotoluene (TNT) 485 5.4.3. Aromatic Hydrocarbons 485 5.4.4. Heavy Metals 485 5.4.5. Phenols 485 5.4.6. Polychlorinated Biphenyls 487 5.4.7. Dioxins 487 5.5. Summary 488 6. Conclusions 489 7. Abbreviations 489 8. Acknowledgment 489 9. References 489