Fu-Pen Chiang

Bio: Fu-Pen Chiang is an academic researcher from Stony Brook University. The author has contributed to research in topics: Speckle pattern & Electronic speckle pattern interferometry. The author has an hindex of 33, co-authored 243 publications receiving 4637 citations. Previous affiliations of Fu-Pen Chiang include The Catholic University of America & University of Florida.

High-speed 3-D shape measurement based on digital fringe projection

Abstract: A high-speed 3-D shape measurement technique based on digital fringe projection has been developed and experimented. This technique uses a computer-generated color fringe pattern whose red, green, and blue channels are sinusoidal fringe patterns with a 120-deg phase shift between neighboring channels. When this color fringe pat- tern is sent to a digital-micromirror-device (DMD) based video projector with no color filter, three gray-scale fringe patterns are repeatedly pro- jected to an object surface in sequence with a cycle time of approxi- mately 10 ms. The three phase-shifted fringe patterns deformed by the object surface are captured by a CCD camera with proper synchroniza- tion between the camera and the projector. The 3-D shape of the object surface is reconstructed by using a phase wrapping and unwrapping algorithm and a phase-coordinate conversion algorithm. Experimental results demonstrated the feasibility of this technique for high-speed 3-D shape measurement with a potential measurement speed up to 100 Hz. © 2003 Society of Photo-Optical Instrumentation Engineers. (DOI: 10.1117/1.1525272) Subject terms: fringe projection; phase shifting; digital micromirror device; 3-D shape measurement.

Color-encoded digital fringe projection technique for high-speed three-dimensional surface contouring

Abstract: A color-encoded digital fringe projection technique is proposed for high-speed 3-D surface contouring applications. in this technique, a color fringe pattern whose RGB components comprise three phase-shifted fringe patterns is created by software on a computer screen and then projected to an object by a novel computer-controlled digital projection system. The image of the object is captured by a digital camera positioned at an angle different from that of the projection system. The image is then separated into its RGB components, creating three phase-shifted images of the object. These three images are used to retrieve the 3-D surface contour of the object through the use of a phase wrapping and unwrapping algorithm. Only one image of the object is required to obtain the 3-D surface contour of the object. Thus contouring speed, limited only by the frame rate of the camera, can be dramatically increased as compared to that of the traditional phase-shifting techniques. The technique is especially useful in applications where the object being contoured is going through quasi-static or dynamic changes. The principle of the technique is described and some preliminary experimental results are presented.

Digital speckle-displacement measurement using a complex spectrum method

Abstract: An alternative approach to fully automatic speckle-displacement measurement is described. Two speckle patterns of a specimen, one before and one after deformation, are captured by a CCD camera and registered by a frame grabber. Two series of small subimages are obtained by segmenting the two speckle patterns. The corresponding subimage pairs extracted from both series are analyzed pointwise. The interrogation of each subimage pair involves a two-step fast-Fourier transform. While the first-step fast-Fourier transform achieves a complex spectrum characterized by the local displacement information, the second-step one generates a signal peak in the second spectral domain that resolves the local displacement vector. A rough estimate of the displacement vector is achieved by detecting the maximum pixel of the discrete spectrum. A more accurate determination is attained by a subpixel-maximum determination through a biparabolic fitting near the signal peak. The u- and v-displacement fields are deduced by analyzing all subimage pairs. A large rigid-body displacement can be overcome by introducing an artificial rigid shift of the two speckle patterns toward each other before the numerical process. The technique retains all the advantages of optical speckle photography and provides an extended range of measurement. Dynamic incremental deformations can be inspected by registering more speckle patterns at many consecutive deformation stages by using a high-speed CCD camera. The system was applied successfully to the study of crack-tip deformation fields.

Wavelet-based pavement distress detection and evaluation

Abstract: An automated pavement inspection system consists of image acquisition and distress image processing. The former is accomplished with imaging sensors, such as video cameras and photomultiplier tubes. The latter includes distress detection, isolation, classification, evaluation, segmentation, and compression. We focus on wavelet-based distress detection, isolation, and evaluation. After a pavement image is decomposed into different-frequency subbands by the wavelet transform, distresses are transformed into high-amplitude wavelet coefficients and noise is transformed into low-amplitude wavelet coefficients, both in the high-frequency subbands, referred to as details. Background is transformed into wavelet coefficients in a low-frequency subband, referred to as approximation. First, several statistical criteria are developed for distress detection and isolation, which include the high-amplitude wavelet coefficient percentage (HAWCP), the high-frequency energy percentage (HFEP), and the standard deviation (STD). These criteria are tested on hundreds of pavement images differing by type, severity, and extent of distress. Experimental results demonstrate that the proposed criteria are reliable for distress detection and isolation and that real-time distress detection and screening is currently feasible. A norm for pavement distress quantification, which is defined as the product of HAWCP and HFEP, is also proposed. Experimental results show that the norm is a useful index for pavement distress evaluation.

Calibration of a three-dimensional shape measurement system

Abstract: A 3-D surface shape measurement system based on a digital fringe projection and phase shifting technique is described. In this system, three phase-shifted fringe patterns and a centerline pattern are used to determine the absolute phase map of the object. This phase map is then converted to the x , y , and z coordinates of the object surface by a conversion algorithm. To determine the accurate values of the system parameters as required by the conversion algorithm, a two-step calibration procedure was developed. The parameters were first measured to determine their approximate values, then a calibration plate was measured by the system at various positions, and an iteration algorithm used to estimate the system parameters. Measurement results of several objects are presented. The standard deviation of the measurement error was found to be 0.23 mm.

Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review

Abstract: As a practical and effective tool for quantitative in-plane deformation measurement of a planar object surface, two-dimensional digital image correlation (2D DIC) is now widely accepted and commonly used in the field of experimental mechanics. It directly provides full-field displacements to sub-pixel accuracy and full-field strains by comparing the digital images of a test object surface acquired before and after deformation. In this review, methodologies of the 2D DIC technique for displacement field measurement and strain field estimation are systematically reviewed and discussed. Detailed analyses of the measurement accuracy considering the influences of both experimental conditions and algorithm details are provided. Measures for achieving high accuracy deformation measurement using the 2D DIC technique are also recommended. Since microscale and nanoscale deformation measurement can easily be realized by combining the 2D DIC technique with high-spatial-resolution microscopes, the 2D DIC technique should find more applications in broad areas.

Overview of three-dimensional shape measurement using optical methods

Abstract: We first provide an overview of 3-D shape measurement us- ing various optical methods. Then we focus on structured light tech- niques where various optical configurations, image acquisition tech- niques, data postprocessing and analysis methods and advantages and limitations are presented. Several industrial application examples are presented. Important areas requiring further R&D are discussed. Finally, a comprehensive bibliography on 3-D shape measurement is included, although it is not intended to be exhaustive. © 2000 Society of Photo-Optical Instrumentation Engineers. (S0091-3286(00)00101-X)

Residual stress. Part 1 – Measurement techniques

Abstract: Residual stress is that which remains in a body that is stationary and at equilibrium with its surroundings. It can be very detrimental to the performance of a material or the life of a component. Alternatively, beneficial residual stresses can be introduced deliberately. Residual stresses are more difficult to predict than the in-service stresses on which they superimpose. For this reason, it is important to have reliable methods for the measurement of these stresses and to understand the level of information they can provide. In this paper, which is the first part of a two part overview, the effect of residual stresses on fatigue lifetimes and structural integrity are first summarised, followed by the definition and measurement of residual stresses. Different types of stress are characterised according to the characteristic length scale over which they self-equilibrate. By comparing this length to the gauge volume of each technique, the capability of a range of techniques is assessed. In the sec...