G. van Koten

Bio: G. van Koten is an academic researcher from University of Amsterdam. The author has contributed to research in topics: Crystal structure & Aryl. The author has an hindex of 47, co-authored 346 publications receiving 8065 citations. Previous affiliations of G. van Koten include University of Birmingham & Radboud University Nijmegen.

1,4-Diaza-1,3-butadiene (a-diimine) ligands: their coordination modes and the reactivity of their metal complexes

Abstract: Publisher Summary Molecules containing the 1,4-diaza-1,3-butadiene skeleton have attracted much interest because of both their versatile coordination behavior and the interesting properties of their metal complexes. 1,4-diaza-1,3-butadienes (R-DAB) may be prepared by condensation reactions involving glyoxals, α-ketoaldehydes or α, β-–diketones with primary amines RNH2. It was concluded from nuclear magnetic resonance (NMR) spectra, dipole moments, and infrared (IR) spectra that the R-DAB molecule exists in solution in the E configuration at both C=N double bonds while the conformation of the central C–C bond is predominantly s-trans. So far stable complexes containing monodentate R–DAB have only been reported for the square planar d8–metals Pd11, Pt11, and Rh1. The reports of metal complexes with R–DAB ligands date back to 1953 when Krumholz described the synthesis of some ferrous complexes. The unusual stability and characteristic color being ascribed to the presence of π bonding between the metal and the nitrogen atoms. Factors, such as the substituents R and R, the metal atom, and the other ligands bonded to the metal atom, will influence the type of coordination of the R–DAB( R’,R) ligands. Just as 2, 2’-bipyridine, the R–DAB ligands can be readily converted to stable paramagnetic radical anions by potassium in 1,2-dirnethoxyethane or tetrahydrofuran (THF).

A 'Dendritic Effect' in Homogeneous Catalysis with Carbosilane-Supported Arylnickel (II) Catalysts: Observation of Active-Site Proximity Effects in Atom-Transfer Radical Addition

Abstract: Transmetalation of polylithiated, carbosilane (CS) dendrimers functionalized with the potentially terdentate ligand [C6H2(CH2NMe2)2-2,6-R-4]- ( = NCN) with NiCl2(PEt3)2 produced a series of nickel-containing dendrimers [G0]-Ni4 (4), [G1]-Ni12 (5), and [G2]-Ni36 (7) in moderate to good yields. The metallodendrimers 4, 5, and 7 are catalytically active in the atom-transfer radical addition (ATRA) reaction (Kharasch addition reaction), viz. the 1:1 addition of CCl4 to methyl methacrylate (MMA). The catalytic data were compared to those obtained for the respective mononuclear compound [NiCl(C6H2{CH2NMe2}2-2,6-SiMe3-4)] (2). This comparison indicates a fast deactivation for the dendrimer catalysts beyond generation [G0]. The deactivation of [G1]-Ni12 (5) and [G2]-Ni36 (7) is caused by irreversible formation of catalytically inactive Ni(III) sites on the periphery of these dendrimers. This hypothesis is supported by results of model studies as well as ESR spectroscopic investigations. Interestingly, the use of two alternative nickelated [G1] dendrimers [G1]*-Ni12 (11) and [G1]-Ni8 (15), respectively, in which the distance between the Ni sites is increased, leads to significantly improved catalytic efficiencies which approximate those of the parent derivative 2 and [G0]-Ni4 (4). Preliminary membrane catalysis experiments with [G0]-Ni4 (4) and [G1]-Ni12 (5) show that 5 can be efficiently retained in a membrane reactor system. The X-ray crystal structure of the Ni(III) complex [NiCl2(C6H2{CH2NMe2}2-2,6-SiMe3-4)] (16), obtained from the reaction of 2 with CCl4, is also reported.

Consequences of N,C,N'- and C,N,N'-coordination modes on electronic and photophysical properties of cyclometalated aryl ruthenium(II) complexes.

Abstract: The effects of isoelectronic replacement of a neutral nitrogen donor atom by an anionic carbon atom in terpyridine ruthenium(II) complexes on the electronic and photophysical properties of the resulting N,C,N'- and C,N,N'-cyclometalated aryl ruthenium(II) complexes were investigated. To this end, a series of complexes was prepared either with ligands containing exclusively nitrogen donor atoms, that is, [Ru(R-1-tpy)(R-2-tpy)](2+) (R-1, R-2 = H, CO2Et), or bearing either one N,C,N'- or C,N,N'-cyclometalated ligand and one tpy ligand, that is, [Ru(R-1-(NCN)-C-Lambda-N-Lambda)(R-2-tpy)](+) and [Ru(R-1-(CNN)-N-Lambda-N-Lambda)(R-2-tpy)](+), respectively. Single-crystal X-ray structure determinations showed that cyclometalation does not significantly alter the overall geometry of the complexes but does change the bond lengths around the ruthenium(II) center, especially the nitrogen-to-ruthenium bond length trans to the carbanion. Substitution of either of the ligands with electron-withdrawing ester functionalities fine-tuned the electronic properties and resulted in the presence of an IR probe. Using trends obtained from redox potentials, emission energies, IR spectroelectrochemical responses, and the character of the lowest unoccupied molecular orbitals from DFT studies, it is shown that the first reduction process and luminescence are associated with the ester-substituted C,N,N'-cyclometalated ligand in [Ru(EtO2C-(CNN)-N-Lambda-N-Lambda)(tpy)](+). Cyclometalation in an N,C,N'-bonding motif changed the energetic order of the ruthenium d(zx), d(yz), and d(xy) orbitals. The red-shifted absorption in the N,C,N'-cyclometalated complexes is assigned to MLCT transitions to the tpy ligand. The red shift observed upon introduction of the ester moiety is associated with an increase in intensity of low-energy transitions, rather than a red shift of the main transition. Cyclometalation in the C,N,N'-binding motif also red-shifts the absorption, but the corresponding transition is associated with both ligand types. Luminescence of the cyclometalated complexes is relatively independent of the mode of cyclometalation, obeying the energy gap law within each individual series.

Palladium-Catalyzed Ligand-Directed C−H Functionalization Reactions

Abstract: 1.1 Introduction to Pd-catalyzed directed C–H functionalization The development of methods for the direct conversion of carbon–hydrogen bonds into carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon bonds remains a critical challenge in organic chemistry. Mild and selective transformations of this type will undoubtedly find widespread application across the chemical field, including in the synthesis of pharmaceuticals, natural products, agrochemicals, polymers, and feedstock commodity chemicals. Traditional approaches for the formation of such functional groups rely on pre-functionalized starting materials for both reactivity and selectivity. However, the requirement for installing a functional group prior to the desired C–O, C–X, C–N, C–S, or C–C bond adds costly chemical steps to the overall construction of a molecule. As such, circumventing this issue will not only improve atom economy but also increase the overall efficiency of multi-step synthetic sequences. Direct C–H bond functionalization reactions are limited by two fundamental challenges: (i) the inert nature of most carbon-hydrogen bonds and (ii) the requirement to control site selectivity in molecules that contain diverse C–H groups. A multitude of studies have addressed the first challenge by demonstrating that transition metals can react with C–H bonds to produce C–M bonds in a process known as “C–H activation”.1 The resulting C–M bonds are far more reactive than their C–H counterparts, and in many cases they can be converted to new functional groups under mild conditions. The second major challenge is achieving selective functionalization of a single C–H bond within a complex molecule. While several different strategies have been employed to address this issue, the most common (and the subject of the current review) involves the use of substrates that contain coordinating ligands. These ligands (often termed “directing groups”) bind to the metal center and selectively deliver the catalyst to a proximal C–H bond. Many different transition metals, including Ru, Rh, Pt, and Pd, undergo stoichiometric ligand-directed C–H activation reactions (also known as cyclometalation).2,3 Furthermore, over the past 15 years, a variety of catalytic carbon-carbon bond-forming processes have been developed that involve cyclometalation as a key step.1b–d,4 The current review will focus specifically on ligand-directed C–H functionalization reactions catalyzed by palladium. Palladium complexes are particularly attractive catalysts for such transformations for several reasons. First, ligand-directed C–H functionalization at Pd centers can be used to install many different types of bonds, including carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon linkages. Few other catalysts allow such diverse bond constructions,5,6,7 and this versatility is predominantly the result of two key features: (i) the compatibility of many PdII catalysts with oxidants and (ii) the ability to selectively functionalize cyclopalladated intermediates. Second, palladium participates in cyclometalation with a wide variety of directing groups, and, unlike many other transition metals, promotes C–H activation at both sp2 and sp3 C–H sites. Finally, the vast majority of Pd-catalyzed directed C–H functionalization reactions can be performed in the presence of ambient air and moisture, making them exceptionally practical for applications in organic synthesis. While several accounts have described recent advances, this is the first comprehensive review encompassing the large body of work in this field over the past 5 years (2004–2009). Both synthetic applications and mechanistic aspects of these transformations are discussed where appropriate, and the review is organized on the basis of the type of bond being formed.

Palladium(II)-catalyzed C-H activation/C-C cross-coupling reactions: versatility and practicality.

Abstract: Pick your Pd partners: A number of catalytic systems have been developed for palladium-catalyzed CH activation/CC bond formation. Recent studies concerning the palladium(II)-catalyzed coupling of CH bonds with organometallic reagents through a PdII/Pd0 catalytic cycle are discussed (see scheme), and the versatility and practicality of this new mode of catalysis are presented. Unaddressed questions and the potential for development in the field are also addressed. In the past decade, palladium-catalyzed CH activation/CC bond-forming reactions have emerged as promising new catalytic transformations; however, development in this field is still at an early stage compared to the state of the art in cross-coupling reactions using aryl and alkyl halides. This Review begins with a brief introduction of four extensively investigated modes of catalysis for forming CC bonds from CH bonds: PdII/Pd0, PdII/PdIV, Pd0/PdII/PdIV, and Pd0/PdII catalysis. A more detailed discussion is then directed towards the recent development of palladium(II)-catalyzed coupling of CH bonds with organometallic reagents through a PdII/Pd0 catalytic cycle. Despite the progress made to date, improving the versatility and practicality of this new reaction remains a tremendous challenge.

Green Chemistry: Principles and Practice

Abstract: Green Chemistry is a relatively new emerging field that strives to work at the molecular level to achieve sustainability. The field has received widespread interest in the past decade due to its ability to harness chemical innovation to meet environmental and economic goals simultaneously. Green Chemistry has a framework of a cohesive set of Twelve Principles, which have been systematically surveyed in this critical review. This article covers the concepts of design and the scientific philosophy of Green Chemistry with a set of illustrative examples. Future trends in Green Chemistry are discussed with the challenge of using the Principles as a cohesive design system (93 references).