G. Vinitha

Bio: G. Vinitha is an academic researcher from VIT University. The author has contributed to research in topics: Single crystal & Crystal. The author has an hindex of 23, co-authored 251 publications receiving 2106 citations. Previous affiliations of G. Vinitha include B. S. Abdur Rahman University & Anna University.

Spectral, dielectric, mechanical and optical characteristics of LPDMCl single crystal for nonlinear optical applications

Abstract: A potent semiorganic third order acentric crystal Poly[μ-chlorido-heptachlorido-μ3- l -proline-μ2- l -proline-tetramercury(II)] (LPDMCl) with the chemical formula [Hg4Cl8(C5H9NO2)2]n was crystallized by slow evaporation in water and thereby its second and third order optical nonlinearities are explored using the technique of SHG powder test of Kurtz-Perry and Z-scan single beam respectively. The grown crystalline material was analyzed by single crystal XRD, which discloses the acentric space group P1 of the material with the crystal system of triclinic. From XRD analysis, the obtained peaks were indexed correlated to the orientations of (hkl) plane thus displaying the crystalline purity and perfection. FTIR spectrum detailed the diverse vibrational modes, which signifies the functional groups in LPDMCl. Surface topology of the crystallized salts was accomplished by the examination of SEM. Mechanical, dielectric, linear and nonlinear optical investigation were performed to affirm LPDMCl as an aspiring candidate in establishing proficient nonlinear optical and optical power limiting device for practical applications.

Optical limiting characteristics of core-shell nanoparticles

Abstract: TiO2 nanoparticles were synthesized by hydrothermal method at 180°C from TiOSO4 aqueous solution with 1 m/l concentration. The obtained products were coated with silica by means of a seeded polymerization technique for a coating time of 1440 minutes to obtain well-defined TiO2@SiO2 core-shell structure. The uncoated and coated nanoparticles were characterized by using X-Ray diffraction technique (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) to study their physico-chemical properties. Evidence from XRD and FTIR results show that SiO2 is homogenously coated on the surface of titania particles. FTIR spectra show that there exists an interaction between TiO2 and SiO2 and results in the formation of Ti-O-Si chemical bonds at the interface of TiO2 particles and SiO2 coating layer. The open aperture z-scan was carried out in both pulsed and CW laser. The RSA observed using CW laser and effective three-photon type absorption seen using pulsed laser at this wavelength, is of potential application in fabricating optical limiting devices. The non linear optical limiting properties of TiO2 and TiO2@SiO2 nanoparticles dispersed in ethylene glycol were studied at 532 nm using 5 ns Nd:YAG laser pulses and diode pumped Nd:YAG laser. Results indicate that these compounds are a potential candidate for low-power optical limiting applications and it is seen that the optical nonlinearity is enhanced in core-shell structures when compared with single counterparts.

Synthesis, crystal structure, optical and third order nonlinear optical properties of phosphoric acid pyridine-1-ium-2-carboxylate

Abstract: A semi-organic nonlinear optical material phosphoric acid pyridine-1-ium-2-carboxylate (PAPC) crystal has been synthesized and grown. Vibrational spectral analysis and NMR spectral analysis has been carried out. Mechanical studies on the grown crystal has been performed which disclose the material belongs to soft materials category. The thermal behaviour of the grown crystal has been investigated by thermogravimetric and differential thermal analysis. UV–Visible spectral analysis has been carried out which reveals that the grown crystal is transparent in the entire visible region with the lower cut-off wavelength of 298 nm and the derived optical constant attests the suitability of this material for non-linear optical applications. The third order nonlinearity has been studied by z-scan method and the enhanced third-order nonlinearity shows PAPC is a potential material for device applications. Second harmonic generation efficiency has been studied by Kurtz and Perry powder test and is found as 0.14 times greater than the KDP.

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Abstract: Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.

Nonlinear Optical Materials for the Smart Filtering of Optical Radiation.

Abstract: The control of luminous radiation has extremely important implications for modern and future technologies as well as in medicine. In this Review, we detail chemical structures and their relevant photophysical features for various groups of materials, including organic dyes such as metalloporphyrins and metallophthalocyanines (and derivatives), other common organic materials, mixed metal complexes and clusters, fullerenes, dendrimeric nanocomposites, polymeric materials (organic and/or inorganic), inorganic semiconductors, and other nanoscopic materials, utilized or potentially useful for the realization of devices able to filter in a smart way an external radiation. The concept of smart is referred to the characteristic of those materials that are capable to filter the radiation in a dynamic way without the need of an ancillary system for the activation of the required transmission change. In particular, this Review gives emphasis to the nonlinear optical properties of photoactive materials for the functi...

Nonlinear optical properties and applications of 2D materials: theoretical and experimental aspects

Abstract: In this review, we survey the recent advances in nonlinear optics and the applications of two-dimensional (2D) materials. We briefly cover the key developments pertaining to research in the nonlinear optics of graphene, the quintessential 2D material. Subsequently, we discuss the linear and nonlinear optical properties of several other 2D layered materials, including transition metal chalcogenides, black phosphorus, hexagonal boron nitride, perovskites, and topological insulators, as well as the recent progress in hybrid nanostructures containing 2D materials, such as composites with dyes, plasmonic particles, 2D crystals, and silicon integrated structures. Finally, we highlight a few representative current applications of 2D materials to photonic and optoelectronic devices.

Nonlinear optical properties of metal nanoparticles: a review

Abstract: Metal nanoparticles (MNPs) hold great technological promise because of the possibility of engineering their electronic and optical properties through material design. One of the effective methods to fabricate MNPs is ion implantation. In this review, recent results on the nonlinear optical properties of nanoparticles (including copper, silver, gold, and bismuth nanoparticles) doped in various bases have been discussed. Some specific optical nonlinear properties, such as nonlinear refraction, two-photon absorption, and optical limiting, for femtosecond, picosecond, and nanosecond laser pulses have also been covered. In addition to ion implantation, we have summarized several other methods for the preparation of composite materials, and Z-scan has been used to study the nonlinear optical properties of these materials.