Gang Shao

Bio: Gang Shao is an academic researcher from Zhengzhou University. The author has contributed to research in topics: Ceramic & Materials science. The author has an hindex of 28, co-authored 148 publications receiving 3639 citations.

Yolk–Shell Ni@SnO2 Composites with a Designable Interspace To Improve the Electromagnetic Wave Absorption Properties

Abstract: In this study, yolk–shell Ni@SnO2 composites with a designable interspace were successfully prepared by the simple acid etching hydrothermal method. The Ni@void@SnO2 composites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results indicate that interspaces exist between the Ni cores and SnO2 shells. Moreover, the void can be adjusted by controlling the hydrothermal reaction time. The unique yolk–shell Ni@void@SnO2 composites show outstanding electromagnetic wave absorption properties. A minimum reflection loss (RLmin) of −50.2 dB was obtained at 17.4 GHz with absorber thickness of 1.5 mm. In addition, considering the absorber thickness, minimal reflection loss, and effective bandwidth, a novel method to judge the effective microwave absorption properties is proposed. On the basis of this method, the best microwave absorption properties were obtained with a 1.7 mm th...

Synthesis of flower-like CuS hollow microspheres based on nanoflakes self-assembly and their microwave absorption properties

Abstract: Flower-like CuS hollow microspheres composed of nanoflakes have been successfully prepared via a facile solvothermal method. The crystal structure, morphology and microwave absorption properties of the as-synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and a network analyser. The effects of reaction temperature, concentration of the reagents and reaction time on the structures and morphologies of the CuS products were investigated using XRD and SEM techniques. A plausible mechanism for the formation of hollow architectures related to Ostwald ripening was proposed. The CuS/paraffin composite containing 30 wt% CuS hollow microspheres shows the best microwave absorption properties compared with other CuS/paraffin composites. The minimum reflection loss of −31.5 dB can be observed at 16.7 GHz and reflection loss below −10 dB is 3.6 GHz (14.4–18.0 GHz) with a thickness of only 1.8 mm. The effective absorption (below −10 dB, 90% microwave absorption) bandwidth can be tuned between 6.2 GHz and 18.0 GHz for the absorber with a thin thickness in the range 1.5–4.0 mm. The results indicate that the microwave absorption properties of flower-like CuS hollow microspheres possess the advantages of broad bandwidth, strong absorption, lightweight and thin thickness are superior to those of other absorbing materials.

Facile synthesis of yolk–shell Ni@void@SnO2(Ni3Sn2) ternary composites via galvanic replacement/Kirkendall effect and their enhanced microwave absorption properties

Abstract: Yolk–shell ternary composites composed of a Ni sphere core and a SnO2(Ni3Sn2) shell were successfully prepared by a facile two-step method. The size, morphology, microstructure, and phase purity of the resulting composites were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy (TEM), high-resolution TEM, selected-area electron diffraction, and powder X-ray diffraction. The core sizes, interstitial void volumes, and constituents of the yolk–shell structures varied by varying the reaction time. A mechanism based on the time-dependent experiments was proposed for the formation of the yolk–shell structures. The yolk–shell structures were formed by a synergistic combination of an etching reaction, a galvanic replacement reaction, and the Kirkendall effect. The yolk–shell ternary SnO2 (Ni3Sn2)@Ni composites synthesized at a reaction time of 15 h showed excellent microwave absorption properties. The reflection loss was found to be as low as–43 dB at 6.1 GHz. The enhanced microwave absorption properties may be attributed to the good impedance match, multiple reflections, the scattering owing to the voids between the core and the shell, and the effective complementarities between the dielectric loss and the magnetic loss. Thus, the yolk–shell ternary composites are expected to be promising candidates for microwave absorption applications, lithium ion batteries, and photocatalysis.

Morphology-Control Synthesis of a Core-Shell Structured NiCu Alloy with Tunable Electromagnetic-Wave Absorption Capabilities.

Abstract: In this work, dendritelike and rodlike NiCu alloys were prepared by a one-pot hydrothermal process at various reaction temperatures (120, 140, and 160 °C). The structure and morphology were analyzed by scanning electron microscopy, energy-dispersive spectrometry, X-ray diffraction, and transmission electron microscopy, which that demonstrate NiCu alloys have core–shell heterostructures with Ni as the shell and Cu as the core. The formation mechanism of the core–shell structures was also discussed. The uniform and perfect dendritelike NiCu alloy obtained at 140 °C shows outstanding electromagnetic-wave absorption properties. The lowest reflection loss (RL) of −31.13 dB was observed at 14.3 GHz, and the effective absorption (below −10 dB, 90% attenuation) bandwidth can be adjusted between 4.4 and 18 GHz with a thin absorber thickness in the range of 1.2–4.0 mm. The outstanding electromagnetic-wave-absorbing properties are ascribed to space-charge polarization arising from the heterogeneous structure of the ...

Investigation of the electromagnetic absorption properties of Ni@TiO2 and Ni@SiO2 composite microspheres with core-shell structure.

Abstract: In this work, amorphous TiO2 and SiO2-coated Ni composite microspheres were successfully prepared by a two-step method. The phase purity, morphology, and structure of composite microspheres are characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). Due to the presence of the insulator SiO2 shell, the core–shell Ni–SiO2 composite microspheres exhibit better antioxidation capability than that of pure Ni microspheres. The core–shell Ni–SiO2 composite microspheres show the best microwave absorption properties than those of pure Ni microspheres and Ni–TiO2 composites. For Ni–SiO2 composite microspheres, an optimal reflection loss (RL) as low as −40.0 dB (99.99% absorption) was observed at 12.6 GHz with an absorber thickness of only 1.5 mm. The effective absorption (below −10 dB, 90% microwave absorption) bandwidth can be adjusted between 3.1 GHz and 14.4 GHz by tuning the absorber thickness in the range of 1.5–4.5 mm. The excellent microwave absorption abilities of Ni–SiO2 composite microspheres are attributed to a higher attenuation constant, Debye relaxation, interface polarization of the core–shell structure and synergistic effects between high dielectric loss and high magnetic loss.

Mn3O4-Graphene Hybrid as a High Capacity Anode Material for Lithium Ion Batteries

Abstract: We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Mn3O4 nanoparticles grown selectively on RGO sheets over free particle growth in solution allowed for the electrically insulating Mn3O4 nanoparticles wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ~900mAh/g near its theoretical capacity with good rate capability and cycling stability, owing to the intimate interactions between the graphene substrates and the Mn3O4 nanoparticles grown atop. The Mn3O4/RGO hybrid could be a promising candidate material for high-capacity, low-cost, and environmentally friendly anode for lithium ion batteries. Our growth-on-graphene approach should offer a new technique for design and synthesis of battery electrodes based on highly insulating materials.

Semiconductor polymeric graphitic carbon nitride photocatalysts: the “holy grail” for the photocatalytic hydrogen evolution reaction under visible light

Abstract: Semiconductor polymeric graphitic carbon nitride (g-C3N4) photocatalysts have attracted dramatically growing attention in the field of the visible-light-induced hydrogen evolution reaction (HER) because of their facile synthesis, easy functionalization, attractive electronic band structure, high physicochemical stability and photocatalytic activity. This review article presents a panorama of the latest advancements in the rational design and development of g-C3N4 and g-C3N4-based composite photocatalysts for HER application. Concretely, the review starts with the development history, synthetic strategy, electronic structure and physicochemical characteristics of g-C3N4 materials, followed by the rational design and engineering of various nanostructured g-C3N4 (e.g. thinner, highly crystalline, doped, and porous g-C3N4) photocatalysts for HER application. Then a series of highly efficient g-C3N4 (e.g., metal/g-C3N4, semiconductor/g-C3N4, metal organic framework/g-C3N4, carbon/g-C3N4, conducting polymer/g-C3N4, sensitizer/g-C3N4) composite photocatalysts are exemplified. Lastly, this review provides a comprehensive summary and outlook on the major challenges, opportunities, and inspiring perspectives for future research in this hot area on the basis of pioneering works. It is believed that the emerging g-C3N4-based photocatalysts will act as the “holy grail” for highly efficient photocatalytic HER under visible-light irradiation.

A Voltage-Boosting Strategy Enabling a Low-Frequency, Flexible Electromagnetic Wave Absorption Device.

Abstract: Nowadays, low-frequency electromagnetic interference (<2.0 GHz) remains a key core issue that plagues the effective attenuation performance of conventional absorption devices prepared via the component-morphology method (Strategy I). According to theoretical calculations, one fundamental solution is to develop a material that possesses a high e' but lower e″. Thus, it is attempted to control the dielectric values via applying an external electrical field, which inducts changes in the macrostructure toward a performance improvement (Strategy II). A sandwich-structured flexible electronic absorption device is designed using a carbon film electrode to conduct an external current. Simultaneously, an absorption layer that is highly responsive to an external voltage is selected via Strategy I. Relying on the synergistic effects from Strategies I and II, this device demonstrates an absorption value of more than 85% at 1.5-2.0 GHz with an applied voltage of 16 V while reducing the thickness to ≈5 mm. In addition, the device also shows a good absorption property at 25-150 °C. The method of utilizing an external voltage to break the intrinsic dielectric feature by modifying a traditional electronic absorption device is demonstrated for the first time and has great significance in solving the low-frequency electromagnetic interference issue.