Gap-Yong Kim

Bio: Gap-Yong Kim is an academic researcher from Iowa State University. The author has contributed to research in topics: Composite number & Compaction. The author has an hindex of 20, co-authored 55 publications receiving 1634 citations. Previous affiliations of Gap-Yong Kim include University of Michigan.

Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

Abstract: A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites were analyzed using the scanning electron microscopy. A maximum enhancement of 47% in flexural strength was observed when compared with the reference Al6061 processed at the same condition.

Modeling of the Size Effects on the Behavior of Metals in Microscale Deformation Processes

Abstract: For the accurate analysis and design of microforming process, proper modeling of material behavior at the micro/mesoscale is necessary by considering the size effects. Two size effects are known to exist in metallic materials. One is the "grain size" effect, and the other is the "feature/specimen size" effect. This study investigated the feature/ specimen size effect and introduced a scaling model which combined both feature/ specimen and grain size effects. Predicted size effects were compared with three separate experiments obtained from previous research: a simple compression with a round specimen, a simple tension with a round specimen, and a simple tension in sheet metal. The predicted results had a very good agreement with the experiments. Quantification of the miniaturization effect has been achieved by introducing two parameters, α and β, which can be determined by the scaling parameter n, to the Hall-Petch equation. The scaling model offers a simple way to model the size effect down to length scales of a couple of grains and to extend the use of continuum plasticity theories to micro/mesolength scales.

Hallmarks of mechanochemistry: From nanoparticles to technology

Abstract: The aim of this review article on recent developments of mechanochemistry (nowadays established as a part of chemistry) is to provide a comprehensive overview of advances achieved in the field of atomistic processes, phase transformations, simple and multicomponent nanosystems and peculiarities of mechanochemical reactions. Industrial aspects with successful penetration into fields like materials engineering, heterogeneous catalysis and extractive metallurgy are also reviewed. The hallmarks of mechanochemistry include influencing reactivity of solids by the presence of solid-state defects, interphases and relaxation phenomena, enabling processes to take place under non-equilibrium conditions, creating a well-crystallized core of nanoparticles with disordered near-surface shell regions and performing simple dry time-convenient one-step syntheses. Underlying these hallmarks are technological consequences like preparing new nanomaterials with the desired properties or producing these materials in a reproducible way with high yield and under simple and easy operating conditions. The last but not least hallmark is enabling work under environmentally friendly and essentially waste-free conditions (822 references).

Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets

Abstract: One-dimensional carbon nanotubes and two-dimensional graphene nanosheets with unique electrical, mechanical and thermal properties are attractive reinforcements for fabricating light weight, high strength and high performance metal-matrix composites. Rapid advances of nanotechnology in recent years enable the development of advanced metal matrix nanocomposites for structural engineering and functional device applications. This review focuses on the recent development in the synthesis, property characterization and application of aluminum, magnesium, and transition metal-based composites reinforced with carbon nanotubes and graphene nanosheets. These include processing strategies of carbonaceous nanomaterials and their composites, mechanical and tribological responses, corrosion, electrical and thermal properties as well as hydrogen storage and electrocatalytic behaviors. The effects of nanomaterial dispersion in the metal matrix and the formation of interfacial precipitates on these properties are also addressed. Particular attention is paid to the fundamentals and the structure–property relationships of such novel nanocomposites.

Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene – A review

Abstract: Rapid innovation in nanotechnology in recent years enabled development of advanced metal matrix nanocomposites for structural engineering and functional devices. Carbonous materials, such as graphite, carbon nanotubes (CNT's), and graphene possess unique electrical, mechanical, and thermal properties. Owe to their lubricious nature, these carbonous materials have attracted researchers to synthesize lightweight self-lubricating metal matrix nanocomposites with superior mechanical and tribological properties for several applications in automotive and aerospace industries. This review focuses on the recent development in mechanical and tribological behavior of self-lubricating metallic nanocomposites reinforced by carbonous nanomaterials such as CNT and graphene. The review includes development of self-lubricating nanocomposites, related issues in their processing, their characterization, and investigation of their tribological behavior. The results reveal that adding CNT and graphene to metals decreases both coefficient of friction and wear rate as well as increases the tensile strength. The mechanisms involved for the improved mechanical and tribological behavior is discussed.

Graphene reinforced metal and ceramic matrix composites: a review

Abstract: This review critically examines the current state of graphene reinforced metal (GNP-MMC) and ceramic matrix composites (GNP-CMC) The use of graphene as reinforcement for structural materials is motivated by their exceptional mechanical/functional properties and their unique physical/chemical characteristics This review focuses on MMCs and CMCs because of their technological importance for structural applications and the unique challenges associated with developing high-temperature composites with nanoparticle reinforcements The review discusses processing techniques, effects of graphene on the mechanical behaviour of GNP-MMCs and GNP-CMCs, including early studies on the tribological performance of graphene-reinforced composites, where graphene has shown signs of serving as a protective and lubricious phase Additionally, the unique functional properties endowed by graphene to GNP-MMCs and GNP-CMCs, such as enhanced thermal/electrical conductivity, improved oxidation resistance, and excellent bi

Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

Abstract: A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites were analyzed using the scanning electron microscopy. A maximum enhancement of 47% in flexural strength was observed when compared with the reference Al6061 processed at the same condition.