Gee-Kung Chang

Bio: Gee-Kung Chang is an academic researcher from Georgia Institute of Technology. The author has contributed to research in topics: Radio over fiber & Wavelength-division multiplexing. The author has an hindex of 49, co-authored 635 publications receiving 10994 citations. Previous affiliations of Gee-Kung Chang include National Chiao Tung University & University of California.

Optical millimeter-wave generation or up-conversion using external modulators

Abstract: We have experimentally compared the performances of optical millimeter-wave generation or up-conversion using external modulators based on different modulation schemes. The generated or up-converted optical millimeter wave using the optical carrier suppression (OCS) modulation scheme shows the highest receiver sensitivity, highest spectral efficiency, and smallest power penalty over long-distance delivery. Moreover, the OCS modulation scheme has a simple configuration and low-frequency bandwidth requirement for both electrical and optical components. Employing an OCS modulation scheme, 16-channel dense wavelength-division multiplexing signals at 2.5-Gb/s per channel have been up-converted to a 40-GHz carrier simultaneously.

Key Enabling Technologies for Optical–Wireless Networks: Optical Millimeter-Wave Generation, Wavelength Reuse, and Architecture

Abstract: The integration of optical and wireless systems is considered to be one of the most promising solutions for increasing the existing capacity and mobility as well as decreasing the costs in next-generation optical access networks. In this paper, several key enabling technologies for hybrid optical-wireless access networks are described, including optical millimeter-wave (mm-wave) generation, upconversion, and transmission in a downlink direction, and full-duplex operation based on wavelength reuse by using a centralized light source in an uplink direction. By employing these enabling technologies, we design and experimentally demonstrate an optical-wireless testbed that is simultaneously delivering wired and wireless services in the integrated optical-wireless and wavelength-division-multiplexing passive-optical-network access networks. The actual applications consisting of 270-Mb/s uncompressed standard-definition TV signal and 2.5-Gb/s data channels for downstream are successfully transmitted over a 25-km fiber and a 10.2-m indoor wireless link with less than a 1.5-dB power penalty. The results show that this integrated system is a practical solution to deliver superbroadband information services to both stationary and mobile users.

Key Technologies of WDM-PON for Future Converged Optical Broadband Access Networks [Invited]

Abstract: The wavelength-division-multiplexed passive optical network (WDM-PON) is considered to be the next evolutionary solution for a simplified and future-proofed access system that can accommodate exponential traffic growth and bandwidth-hungry new applications. WDM-PON mitigates the complicated time-sharing and power budget issues in time-division-multiplexed PON (TDM-PON) by providing virtual point-to-point optical connectivity to multiple end users through a dedicated pair of wavelengths. There are a few hurdles to overcome before WDM-PON sees widespread deployment. Several key enabling technologies for converged WDM-PON systems are demonstrated, including the techniques for longer reach, higher data rate, and higher spectral efficiency. The cost-efficient architectures are designed for single-source systems and resilient protection for traffic restoration. We also develop the integrated schemes with radio-over-fiber (RoF)-based optical-wireless access systems to serve both fixed and mobile users in the converged optical platform.

A full-duplex radio-over-fiber system based on optical carrier suppression and reuse

Abstract: We have experimentally demonstrated a full-duplex radio-over-fiber system using a single light source at central station (CS). Optical carrier suppression modulation scheme was employed to generate 40-GHz optical millimeter wave and up-convert the baseband signal simultaneously at CS for downlink transmission while the same optical carrier was reused at base station for uplink connection. The bidirectional full-duplex 2.5-Gb/s data was successfully transmitted over 40-km standard single-mode fiber (SMF-28) for both upstream and downstream channels with less than 2-dB power penalty. This system shows simple cost-efficient configuration and good performance over long-distance delivery

High-throughput, low-latency next generation internet networks using optical tag switching

Abstract: An optical signaling header (210) technique applicable to optical networks wherein packet (620) routing information is embedded in the same channel or wavelength as the data payload (211) so that both the header (210) and data (211) payload propagate through network elements with the same path and the associated delays. The header (210) information has sufficiently different characteristics from the data payload (211) so that the signaling header can be detected without being affected by the data payload, and that the signaling header can also be removed without affecting the data payload. The signal routing technique can overlaid onto the conventional network elements in a modular manner using two types of applique modules. The first type effects header encoding and decoding at the entry and exit points of the data payload into and out of the network; the second type effects header detection at each of the network elements.

Pattern Recognition and Machine Learning

Abstract: Probability Distributions.- Linear Models for Regression.- Linear Models for Classification.- Neural Networks.- Kernel Methods.- Sparse Kernel Machines.- Graphical Models.- Mixture Models and EM.- Approximate Inference.- Sampling Methods.- Continuous Latent Variables.- Sequential Data.- Combining Models.

Next Generation 5G Wireless Networks: A Comprehensive Survey

Abstract: The vision of next generation 5G wireless communications lies in providing very high data rates (typically of Gbps order), extremely low latency, manifold increase in base station capacity, and significant improvement in users’ perceived quality of service (QoS), compared to current 4G LTE networks. Ever increasing proliferation of smart devices, introduction of new emerging multimedia applications, together with an exponential rise in wireless data (multimedia) demand and usage is already creating a significant burden on existing cellular networks. 5G wireless systems, with improved data rates, capacity, latency, and QoS are expected to be the panacea of most of the current cellular networks’ problems. In this survey, we make an exhaustive review of wireless evolution toward 5G networks. We first discuss the new architectural changes associated with the radio access network (RAN) design, including air interfaces, smart antennas, cloud and heterogeneous RAN. Subsequently, we make an in-depth survey of underlying novel mm-wave physical layer technologies, encompassing new channel model estimation, directional antenna design, beamforming algorithms, and massive MIMO technologies. Next, the details of MAC layer protocols and multiplexing schemes needed to efficiently support this new physical layer are discussed. We also look into the killer applications, considered as the major driving force behind 5G. In order to understand the improved user experience, we provide highlights of new QoS, QoE, and SON features associated with the 5G evolution. For alleviating the increased network energy consumption and operating expenditure, we make a detail review on energy awareness and cost efficiency. As understanding the current status of 5G implementation is important for its eventual commercialization, we also discuss relevant field trials, drive tests, and simulation experiments. Finally, we point out major existing research issues and identify possible future research directions.

Cloud RAN for Mobile Networks—A Technology Overview

Abstract: Cloud Radio Access Network (C-RAN) is a novel mobile network architecture which can address a number of challenges the operators face while trying to support growing end-user's needs. The main idea behind C-RAN is to pool the Baseband Units (BBUs) from multiple base stations into centralized BBU Pool for statistical multiplexing gain, while shifting the burden to the high-speed wireline transmission of In-phase and Quadrature (IQ) data. C-RAN enables energy efficient network operation and possible cost savings on baseband resources. Furthermore, it improves network capacity by performing load balancing and cooperative processing of signals originating from several base stations. This paper surveys the state-of-the-art literature on C-RAN. It can serve as a starting point for anyone willing to understand C-RAN architecture and advance the research on C-RAN.

Microwave Photonics

Abstract: Broadband and low loss capability of photonics has led to an ever-increasing interest in its use for the generation, processing, control and distribution of microwave and millimeter-wave signals for applications such as broadband wireless access networks, sensor networks, radar, satellite communitarians, instrumentation and warfare systems. In this tutorial, techniques developed in the last few years in microwave photonics are reviewed with an emphasis on the systems architectures for photonic generation and processing of microwave signals, photonic true-time delay beamforming, radio-over-fiber systems, and photonic analog-to-digital conversion. Challenges in system implementation for practical applications and new areas of research in microwave photonics are also discussed.

Wireless sub-THz communication system with high data rate

Abstract: A wireless communication system with a maximum data rate of 100 Gbit s−1 over 20 m is demonstrated using a carrier frequency of 237.5 GHz. The photonic schemes used to generate the signal carrier and local oscillator are described, as is the fast photodetector used as a mixer for data extraction.