Genban Sun

Bio: Genban Sun is an academic researcher from Beijing Normal University. The author has contributed to research in topics: Overpotential & Electrocatalyst. The author has an hindex of 24, co-authored 91 publications receiving 3501 citations. Previous affiliations of Genban Sun include University of Science and Technology Beijing.

Hierarchical Dendrite-Like Magnetic Materials of Fe3O4, γ-Fe2O3, and Fe with High Performance of Microwave Absorption

Abstract: Iron-based microstructured or nanostructured materials, including Fe, γ-Fe2O3, and Fe3O4, are highly desirable for magnetic applications because of their high magnetization and a wide range of magnetic anisotropy. An important application of these materials is use as an electromagnetic wave absorber to absorb radar waves in the centimeter wave (2−18 GHz). Dendrite-like microstructures were achieved with the phase transformation from dendritic α-Fe2O3 to Fe3O4, Fe by partial and full reduction, and γ-Fe2O3 by a reduction−oxidation process, while still preserving the dendritic morphology. The investigation of the magnetic properties and microwave absorbability reveals that the three hierarchical microstructures are typical ferromagnets and exhibit excellent microwave absorbability. In addition, this also confirms that the microwave absorption properties are ascribed to the dielectric loss for Fe and the combination of dielectric loss and magnetic loss for Fe3O4 and γ-Fe2O3.

Hierarchical Nanoassembly of MoS2/Co9S8/Ni3S2/Ni as a Highly Efficient Electrocatalyst for Overall Water Splitting in a Wide pH Range.

Abstract: The design of low-cost yet high-efficiency electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) over a wide pH range is highly challenging. We now report a hierarchical co-assembly of interacting MoS2 and Co9S8 nanosheets attached on Ni3S2 nanorod arrays which are supported on nickel foam (NF). This tiered structure endows high performance toward HER and OER over a very broad pH range. By adjusting the molar ratio of the Co:Mo precursors, we have created CoMoNiS-NF- xy composites ( x: y means Co:Mo molar ratios ranging from 5:1 to 1:3) with controllable morphology and composition. The three-dimensional composites have an abundance of active sites capable of universal pH catalytic HER and OER activity. The CoMoNiS-NF-31 demonstrates the best electrocatalytic activity, giving ultralow overpotentials (113, 103, and 117 mV for HER and 166, 228, and 405 mV for OER) to achieve a current density of 10 mA cm-2 in alkaline, acidic, and neutral electrolytes, respectively. It also shows a remarkable balance between electrocatalytic activity and stability. Based on the distinguished catalytic performance of CoMoNiS-NF-31 toward HER and OER, we demonstrate a two-electrode electrolyzer performing water electrolysis over a wide pH range, with low cell voltages of 1.54, 1.45, and 1.80 V at 10 mA cm-2 in alkaline, acidic, and neutral media, respectively. First-principles calculations suggest that the high OER activity arises from electron transfer from Co9S8 to MoS2 at the interface, which alters the binding energies of adsorbed species and decreases overpotentials. Our results demonstrate that hierarchical metal sulfides can serve as highly efficient all-pH (pH = 0-14) electrocatalysts for overall water splitting.

Efficient uranium capture by polysulfide/layered double hydroxide composites.

Abstract: There is a need to develop highly selective and efficient materials for capturing uranium (normally as UO22+) from nuclear waste and from seawater. We demonstrate the promising adsorption performance of Sx-LDH composites (LDH is Mg/Al layered double hydroxide, [Sx]2– is polysulfide with x = 2, 4) for uranyl ions from a variety of aqueous solutions including seawater. We report high removal capacities (qm = 330 mg/g), large KdU values (104–106 mL/g at 1–300 ppm U concentration), and high % removals (>95% at 1–100 ppm, or ∼80% for ppb level seawater) for UO22+ species. The Sx-LDHs are exceptionally efficient for selectively and rapidly capturing UO22+ both at high (ppm) and trace (ppb) quantities from the U-containing water including seawater. The maximum adsorption coeffcient value KdU of 3.4 × 106 mL/g (using a V/m ratio of 1000 mL/g) observed is among the highest reported for U adsorbents. In the presence of very high concentrations of competitive ions such as Ca2+/Na+, Sx-LDH exhibits superior selectivi...

Hexagonal and cubic Ni nanocrystals grown on graphene: phase-controlled synthesis, characterization and their enhanced microwave absorption properties

Abstract: Hexagonal close-packed Ni (h-Ni) nanocrystals and face-centered cubic Ni (c-Ni) nanoflowers with uniform size and high dispersion have been successfully assembled on graphene nanosheets (GN) via a facile one-step solution-phase strategy under different reaction conditions, where the reduction process of graphite oxide (GO) sheets into GN was accompanied by the generation of Ni nanocrystals. The reduction of GO by this method is effective, which was confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopy and is comparable to conventional methods. The phase and morphology of nickel can be easily tuned by varying the reaction temperature and solvent. It was shown that the as-formed h-Ni nanocrystals with a diameter as small as 3 nm are grown densely and uniformly on the graphene sheets, and as a result the aggregation of the h-Ni nanocrystals was effectively prevented. In addition, c-Ni nanospheres assembled by c-Ni nanocrystals with a size of 15 nm were also uniformly deposited on the graphene sheets. The investigation of the microwave absorbability reveals that the three Ni/GN nanocomposites exhibit excellent microwave absorbability, which is stronger than the corresponding Ni nanostructures.

Enhancing the electromagnetic performance of co through the phase-controlled synthesis of hexagonal and cubic Co nanocrystals grown on graphene

Abstract: Cobalt is a promising soft metallic magnetic material used for important applications in the field of absorbing stealth technology, especially for absorbing centimeter waves. However, it frequently presents a weak dielectric property because of its instability, aggregation, and crystallographic form. A method for enhancing the electromagnetic property of metal Co via phase-controlled synthesis of Co nanostructures grown on graphene (GN) networks has been developed. Hexagonal close-packed cobalt (α-Co) nanocrystals and face-centered cubic cobalt (β-Co) nanospheres with uniform size and high dispersion have been successfully assembled on GN nanosheets via a facile one-step solution-phase strategy under different reaction conditions in which the exfoliated graphite oxide (graphene oxide, GO) nanosheets were reduced along with the formation of Co nanocrystals. The as-synthesized Co/GN nanocomposites showed excellent microwave absorbability in comparison with the corresponding Co nanocrystals or GN, especially...

Mn3O4-Graphene Hybrid as a High Capacity Anode Material for Lithium Ion Batteries

Abstract: We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Mn3O4 nanoparticles grown selectively on RGO sheets over free particle growth in solution allowed for the electrically insulating Mn3O4 nanoparticles wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ~900mAh/g near its theoretical capacity with good rate capability and cycling stability, owing to the intimate interactions between the graphene substrates and the Mn3O4 nanoparticles grown atop. The Mn3O4/RGO hybrid could be a promising candidate material for high-capacity, low-cost, and environmentally friendly anode for lithium ion batteries. Our growth-on-graphene approach should offer a new technique for design and synthesis of battery electrodes based on highly insulating materials.

Broadband and Tunable High‐Performance Microwave Absorption of an Ultralight and Highly Compressible Graphene Foam

Abstract: The broadband and tunable high-performance microwave absorption properties of an ultralight and highly compressible graphene foam (GF) are investigated. Simply via physical compression, the microwave absorption performance can be tuned. The qualified bandwidth coverage of 93.8% (60.5 GHz/64.5 GHz) is achieved for the GF under 90% compressive strain (1.0 mm thickness). This mainly because of the 3D conductive network.

CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption

Abstract: The synthesis of CoNi@SiO2 @TiO2 core-shell and CoNi@Air@TiO2 yolk-shell microspheres is reported for the first time. Owing to the magnetic-dielectric synergistic effect, the obtained CoNi@SiO2 @TiO2 microspheres exhibit outstanding microwave absorption performance with a maximum reflection loss of -58.2 dB and wide bandwidth of 8.1 GHz (8.0-16.1 GHz, < -10 dB).

Recent Advances in Electrocatalytic Hydrogen Evolution Using Nanoparticles.

Abstract: Hydrogen fuel is considered as the cleanest renewable resource and the primary alternative to fossil fuels for future energy supply. Sustainable hydrogen generation is the major prerequisite to realize future hydrogen economy. The electrocatalytic hydrogen evolution reaction (HER), as the vital step of water electrolysis to H2 production, has been the subject of extensive study over the past decades. In this comprehensive review, we first summarize the fundamentals of HER and review the recent state-of-the-art advances in the low-cost and high-performance catalysts based on noble and non-noble metals, as well as metal-free HER electrocatalysts. We systemically discuss the insights into the relationship among the catalytic activity, morphology, structure, composition, and synthetic method. Strategies for developing an effective catalyst, including increasing the intrinsic activity of active sites and/or increasing the number of active sites, are summarized and highlighted. Finally, the challenges, perspectives, and research directions of HER electrocatalysis are featured.

Metal–organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions

Abstract: Highly efficient removal of metal ion pollutants, such as toxic and nuclear waste-related metal ions, remains a serious task from the biological and environmental standpoint because of their harmful effects on human health and the environment. Recently, highly porous metal–organic frameworks (MOFs), with excellent chemical stability and abundant functional groups, have represented a new addition to the area of capturing various types of hazardous metal ion pollutants. This review focuses on recent progress in reported MOFs and MOF-based composites as superior adsorbents for the efficient removal of toxic and nuclear waste-related metal ions. Aspects related to the interaction mechanisms between metal ions and MOF-based materials are systematically summarized, including macroscopic batch experiments, microscopic spectroscopy analysis, and theoretical calculations. The adsorption properties of various MOF-based materials are assessed and compared with those of other widely used adsorbents. Finally, we propose our personal insights into future research opportunities and challenges in the hope of stimulating more researchers to engage in this new field of MOF-based materials for environmental pollution management.