Georg Gaderer

Bio: Georg Gaderer is an academic researcher from Austrian Academy of Sciences. The author has contributed to research in topics: Clock synchronization & Synchronization. The author has an hindex of 16, co-authored 46 publications receiving 911 citations.

The white rabbit project

Abstract: Reliable, fast and deterministic transmission of control information in a network is a need for many distributed systems. One example is timing systems, where a reference frequency is used to accurately schedule time-critical messages. The White Rabbit (WR) project is a multi-laboratory and multi-company effort to bring together the best of the data transfer and timing worlds in a completely open design. It takes advantage of the latest developments for improving timing over Ethernet, such as IEEE 1588 (Precision Time Protocol) and Synchronous Ethernet. The presented approach aims for a general purpose, fieldbus-like transmission system, which provides deterministic data and timing (sub-ns accuracy and ps jitter) to around 1000 stations. It automatically compensates for fiber lengths in the order of 10 km. This paper describes the WR design goals and the specification used for the project. It goes on to describe the central component of the WR system structure the WR switch - with theoretical considerations about the requirements. Finally, it presents real timing measurements for the first prototypes of WR hardware.

White rabbit: Sub-nanosecond timing distribution over ethernet

Abstract: White Rabbit (WR) is the project name for a ambiguous project that uses Ethernet as both, deterministic (synchronous) data transfer and timing network. The presented design aims for a general purpose, fieldbus like transmission system, which provides deterministic data and timing to approximately 1000 timing stations. The main advantage over conventional systems is the highly accurate timing (sub-nanosecond range) without restrictions on the traffic schedule and an upper bound for the delivery time of high priority messages. In addition, WR also automatically compensates for transmission delays in the fibre links, which are in the range of 10 km length. It takes advantage of the latest developments on synchronous Ethernet and IEEE 1588 to enable the distribution of accurate timing information to the nodes saving noticeable amounts of bandwidth.

Limits of synchronization accuracy using hardware support in IEEE 1588

Abstract: Clock synchronization protocols for packet-oriented networks, like IEEE 1588, depend on time stamps drawn from a local clock at distinct points in time. Due to the fact that software-generated time stamps suffer from jitter caused by non-deterministic execution times, many implementations for high precision clock synchronization rely on hardware support. This allows time readings for packets with very low jitter close to the physical layer. Nevertheless, approaches using hardware support have to carefully consider influences on synchronization accuracy when it comes to the range of nanoseconds. Among others, limits come from the update interval, oscillator stability, or hardware clock frequency. This paper enlightens the limits for such implementations based on an analysis of the influences of the main factors for jitter. The conclusions give hints for efficiently optimizing current implementations.

Improving Fault Tolerance in High-Precision Clock Synchronization

Abstract: The very popular Precision Time Protocol (PTP or IEEE 1588) is widely used to synchronize distributed systems with high precision. The underlying principle is a master/slave concept based on the regular exchange of synchronization messages. This paper investigates an approach to enhance PTP with fault tolerance and to overcome the transient deterioration of synchronization accuracy during a recovery from a master failure. To this end, a concept is proposed where a group of masters negotiates a fault-tolerant agreement on the system-wide time and transparently synchronizes the associated IEEE 1588 slaves. Experimental verification on the basis of an Ethernet implementation shows that the approach is feasible and indeed improves the overall synchronization accuracy in terms of fault tolerance.

Towards high accuracy in IEEE 802.11 based clock synchronization using PTP

Abstract: The introduction of the precision time protocol has brought forth the possibility to have a standardised synchronization mechanism in networks, independent from the actual communication technology. However, it can be observed, for example in the annexes of the standard, that many implementations focus only on Ethernet based communication. The logical next step is to investigate how this protocol will fare when used for synchronizing clocks in a distributed manner over IEEE 802.11 based devices. The availability of features like roaming, the broadcast nature of the wireless medium and different hardware platform architectures require an investigation on how clock synchronization can be realized in wireless environments. This paper proposes an approach to import the precision time protocol to IEEE 802.11. Furthermore, standard nodes are enhanced with software timestamping, leading to a synchronization accuracy of a few microseconds.

The Pierre Auger Collaboration

Abstract: The Pierre Auger Collaboration has reported evidence for anisotropies in the arrival directions of cosmic rays with energies larger thanEth = 55 EeV. There is a correlation above the isotropic expectation with nearby active galaxies and the largest excess is in a celestial region around the position of the radio galaxy Cen A. If these anisotropies are due to nuclei of charge Z, the protons accelerated in those sources are expected, under reasonable assumptions, to lead to excesses in the same regions of the sky at energies above Eth/Z. We here report the lack of anisotropies at these lower energies for illustrative values of Z = 6, 13 and 26. These observations set stringent constraints on the allowed proton fraction at the sources.

The past, present and future of cyber-physical systems: a focus on models.

Abstract: This paper is about better engineering of cyber-physical systems (CPSs) through better models. Deterministic models have historically proven extremely useful and arguably form the kingpin of the industrial revolution and the digital and information technology revolutions. Key deterministic models that have proven successful include differential equations, synchronous digital logic and single-threaded imperative programs. Cyber-physical systems, however, combine these models in such a way that determinism is not preserved. Two projects show that deterministic CPS models with faithful physical realizations are possible and practical. The first project is PRET, which shows that the timing precision of synchronous digital logic can be practically made available at the software level of abstraction. The second project is Ptides (programming temporally-integrated distributed embedded systems), which shows that deterministic models for distributed cyber-physical systems have practical faithful realizations. These projects are existence proofs that deterministic CPS models are possible and practical.

Hydrogen epoch of reionization array (HERA)

Abstract: Author(s): DeBoer, David R; Parsons, Aaron R; Aguirre, James E; Alexander, Paul; Ali, Zaki S; Beardsley, Adam P; Bernardi, Gianni; Bowman, Judd D; Bradley, Richard F; Carilli, Chris L; Cheng, Carina; Acedo, Eloy de Lera; Dillon, Joshua S; Ewall-Wice, Aaron; Fadana, Gcobisa; Fagnoni, Nicolas; Fritz, Randall; Furlanetto, Steve R; Glendenning, Brian; Greig, Bradley; Grobbelaar, Jasper; Hazelton, Bryna J; Hewitt, Jacqueline N; Hickish, Jack; Jacobs, Daniel C; Julius, Austin; Kariseb, MacCalvin; Kohn, Saul A; Lekalake, Telalo; Liu, Adrian; Loots, Anita; MacMahon, David; Malan, Lourence; Malgas, Cresshim; Maree, Matthys; Martinot, Zachary; Mathison, Nathan; Matsetela, Eunice; Mesinger, Andrei; Morales, Miguel F; Neben, Abraham R; Patra, Nipanjana; Pieterse, Samantha; Pober, Jonathan C; Razavi-Ghods, Nima; Ringuette, Jon; Robnett, James; Rosie, Kathryn; Sell, Raddwine; Smith, Craig; Syce, Angelo; Tegmark, Max; Thyagarajan, Nithyanandan; Williams, Peter K. G; Zheng, Haoxuan

Hydrogen Epoch of Reionization Array (HERA)

Abstract: The Hydrogen Epoch of Reionization Array (HERA) is a staged experiment to measure 21 cm emission from the primordial intergalactic medium (IGM) throughout cosmic reionization ($z=6-12$), and to explore earlier epochs of our Cosmic Dawn ($z\sim30$). During these epochs, early stars and black holes heated and ionized the IGM, introducing fluctuations in 21 cm emission. HERA is designed to characterize the evolution of the 21 cm power spectrum to constrain the timing and morphology of reionization, the properties of the first galaxies, the evolution of large-scale structure, and the early sources of heating. The full HERA instrument will be a 350-element interferometer in South Africa consisting of 14-m parabolic dishes observing from 50 to 250 MHz. Currently, 19 dishes have been deployed on site and the next 18 are under construction. HERA has been designated as an SKA Precursor instrument. In this paper, we summarize HERA's scientific context and provide forecasts for its key science results. After reviewing the current state of the art in foreground mitigation, we use the delay-spectrum technique to motivate high-level performance requirements for the HERA instrument. Next, we present the HERA instrument design, along with the subsystem specifications that ensure that HERA meets its performance requirements. Finally, we summarize the schedule and status of the project. We conclude by suggesting that, given the realities of foreground contamination, current-generation 21 cm instruments are approaching their sensitivity limits. HERA is designed to bring both the sensitivity and the precision to deliver its primary science on the basis of proven foreground filtering techniques, while developing new subtraction techniques to unlock new capabilities. The result will be a major step toward realizing the widely recognized scientific potential of 21 cm cosmology.

CPS foundations

Abstract: This paper argues that cyber-physical systems present a sub-stantial intellectual challenge that requires changes in both theories of computation and dynamical systems theory. The CPS problem is not the union of cyber and physical problems, but rather their intersection, and as such it demands models that embrace both. Two complementary approaches are identified: cyberizing the physical (CtP) means to endow physical subsystems with cyber-like abstractions and interfaces; and physicalizing the cyber (PtC) means to endow software and network components with abstractions and interfaces that represent their dynamics in time.