Georg von Freymann

Bio: Georg von Freymann is an academic researcher from Kaiserslautern University of Technology. The author has contributed to research in topics: Terahertz radiation & Photonic crystal. The author has an hindex of 33, co-authored 198 publications receiving 7889 citations. Previous affiliations of Georg von Freymann include University of Toronto & Fraunhofer Society.

Gold Helix Photonic Metamaterial as Broadband Circular Polarizer

Abstract: We investigated propagation of light through a uniaxial photonic metamaterial composed of three-dimensional gold helices arranged on a two-dimensional square lattice. These nanostructures are fabricated via an approach based on direct laser writing into a positive-tone photoresist followed by electrochemical deposition of gold. For propagation of light along the helix axis, the structure blocks the circular polarization with the same handedness as the helices, whereas it transmits the other, for a frequency range exceeding one octave. The structure is scalable to other frequency ranges and can be used as a compact broadband circular polarizer.

Direct laser writing of three-dimensional photonic-crystal templates for telecommunications

Abstract: The past decade has witnessed intensive research efforts related to the design and fabrication of photonic crystals1,2. These periodically structured dielectric materials can represent the optical analogue of semiconductor crystals, and provide a novel platform for the realization of integrated photonics. Despite intensive efforts, inexpensive fabrication techniques for large-scale three-dimensional photonic crystals of high enough quality, with photonic bandgaps at near-infrared frequencies, and built-in functional elements for telecommunication applications, have been elusive. Direct laser writing by multiphoton polymerization3 of a photoresist has emerged as a technique for the rapid, cheap and flexible fabrication of nanostructures for photonics. In 1999, so-called layer-by-layer4 or woodpile photonic crystals were fabricated with a fundamental stop band at 3.9 μm wavelength5. In 2002, a corresponding 1.9 μm was achieved6, but the important face-centred-cubic (f.c.c.) symmetry was abandoned. Importantly, fundamental stop bands or photonic bandgaps at telecommunication wavelengths have not been demonstrated. In this letter, we report the fabrication—through direct laser writing—and detailed characterization of high-quality large-scale f.c.c. layer-by-layer structures, with fundamental stop bands ranging from 1.3 to 1.7 μm.

Bottom-up assembly of photonic crystals

Abstract: In this tutorial review we highlight fundamental aspects of the physics underpinning the science of photonic crystals, provide insight into building-block assembly routes to the fabrication of different photonic crystal structures and compositions, discuss their properties and describe how these relate to function, and finally take a glimpse into future applications.

From colour fingerprinting to the control of photoluminescence in elastic photonic crystals

Abstract: In photonic crystals (PCs), strong scattering and destructive wave interference lead to a modification of the photon density of states in particular energy regions and along certain crystallographic directions1,2. The consequences of this range from suppression and enhancement of luminescence3,4,5,6,7 to narrow-band bright reflections useful for colour sensors8,9, displays10 and tuneable filters11,12,13,14. Here we demonstrate large-area films of porous elastomeric photonic crystals (EPCs) that are compressively–decompressively cycled to reversibly shift the position of the photonic band structure over a large wavelength range. Owing to their low compressive threshold, such porous EPCs can be used for imaging that is pressure and time sensitive, for example, to obtain colour fingerprints with high accuracy. Furthermore, by incorporating luminescent PbS quantum dots in the EPCs, the photonic stop-gap can be tuned through the near-infrared (NIR) quantum dot photoluminescence (PL) peak. Thereby we demonstrate a tuneable modification of photonic characteristics, including the suppression and enhancement in emission and dynamic modification of luminescence lifetimes.

Three-Dimensional Nanostructures for Photonics

Abstract: Recent progress in direct laser writing of three-dimensional (3D) polymer nanostructures for photonics is reviewed. This technology has reached a level of maturity at which it can be considered as the 3D analogue of planar electron-beam lithography. Combined with atomic-layer deposition and/or chemical-vapor deposition of dielectrics-the 3D analogues of planar evaporation technologies, the 3D polymer templates can be converted or inverted into 3D high-refractive-index-contrast nanostructures. Examples discussed in this review include positive and inverse 3D silicon-based woodpile photonic crystals possessing complete photonic bandgaps, novel optical resonator designs within these structures, 3D chiral photonic crystals for polarization-state manipulation, and 3D icosahedral photonic quasicrystals. The latter represent a particularly complex 3D nanostructure.

Flat Optics With Designer Metasurfaces

Abstract: Metamaterials are artificially fabricated materials that allow for the control of light and acoustic waves in a manner that is not possible in nature. This Review covers the recent developments in the study of so-called metasurfaces, which offer the possibility of controlling light with ultrathin, planar optical components. Conventional optical components such as lenses, waveplates and holograms rely on light propagation over distances much larger than the wavelength to shape wavefronts. In this way substantial changes of the amplitude, phase or polarization of light waves are gradually accumulated along the optical path. This Review focuses on recent developments on flat, ultrathin optical components dubbed 'metasurfaces' that produce abrupt changes over the scale of the free-space wavelength in the phase, amplitude and/or polarization of a light beam. Metasurfaces are generally created by assembling arrays of miniature, anisotropic light scatterers (that is, resonators such as optical antennas). The spacing between antennas and their dimensions are much smaller than the wavelength. As a result the metasurfaces, on account of Huygens principle, are able to mould optical wavefronts into arbitrary shapes with subwavelength resolution by introducing spatial variations in the optical response of the light scatterers. Such gradient metasurfaces go beyond the well-established technology of frequency selective surfaces made of periodic structures and are extending to new spectral regions the functionalities of conventional microwave and millimetre-wave transmit-arrays and reflect-arrays. Metasurfaces can also be created by using ultrathin films of materials with large optical losses. By using the controllable abrupt phase shifts associated with reflection or transmission of light waves at the interface between lossy materials, such metasurfaces operate like optically thin cavities that strongly modify the light spectrum. Technology opportunities in various spectral regions and their potential advantages in replacing existing optical components are discussed.

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

Abstract: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

Topological Photonics

Abstract: Topological photonics is a rapidly emerging field of research in which geometrical and topological ideas are exploited to design and control the behavior of light. Drawing inspiration from the discovery of the quantum Hall effects and topological insulators in condensed matter, recent advances have shown how to engineer analogous effects also for photons, leading to remarkable phenomena such as the robust unidirectional propagation of light, which hold great promise for applications. Thanks to the flexibility and diversity of photonics systems, this field is also opening up new opportunities to realize exotic topological models and to probe and exploit topological effects in new ways. This article reviews experimental and theoretical developments in topological photonics across a wide range of experimental platforms, including photonic crystals, waveguides, metamaterials, cavities, optomechanics, silicon photonics, and circuit QED. A discussion of how changing the dimensionality and symmetries of photonics systems has allowed for the realization of different topological phases is offered, and progress in understanding the interplay of topology with non-Hermitian effects, such as dissipation, is reviewed. As an exciting perspective, topological photonics can be combined with optical nonlinearities, leading toward new collective phenomena and novel strongly correlated states of light, such as an analog of the fractional quantum Hall effect.

Simultaneous phase and size control of upconversion nanocrystals through lanthanide doping

Abstract: Doping is a widely applied technological process in materials science that involves incorporating atoms or ions of appropriate elements into host lattices to yield hybrid materials with desirable properties and functions. For nanocrystalline materials, doping is of fundamental importance in stabilizing a specific crystallographic phase, modifying electronic properties, modulating magnetism as well as tuning emission properties. Here we describe a material system in which doping influences the growth process to give simultaneous control over the crystallographic phase, size and optical emission properties of the resulting nanocrystals. We show that NaYF(4) nanocrystals can be rationally tuned in size (down to ten nanometres), phase (cubic or hexagonal) and upconversion emission colour (green to blue) through use of trivalent lanthanide dopant ions introduced at precisely defined concentrations. We use first-principles calculations to confirm that the influence of lanthanide doping on crystal phase and size arises from a strong dependence on the size and dipole polarizability of the substitutional dopant ion. Our results suggest that the doping-induced structural and size transition, demonstrated here in NaYF(4) upconversion nanocrystals, could be extended to other lanthanide-doped nanocrystal systems for applications ranging from luminescent biological labels to volumetric three-dimensional displays.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.